siwat
/
siwat-voron-cfg
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update printer.cfg

This commit is contained in:
Siwat Sirichai 2024-01-06 13:25:37 +07:00
parent 9965019968
commit ab071904bd
1 changed files with 10 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
printer.cfg
View File

@ -52,7 +52,7 @@ cs_pin: PC13
spi_software_mosi_pin: PG6
spi_software_miso_pin: PG7
spi_software_sclk_pin: PG8
run_current: 1.000
run_current: 1.414
stealthchop_threshold: 0
# Y Stepper on Motor2 (A Motor)
@ -76,7 +76,7 @@ cs_pin: PE3
spi_software_mosi_pin: PG6
spi_software_miso_pin: PG7
spi_software_sclk_pin: PG8
run_current: 1.000
run_current: 1.414
stealthchop_threshold: 0
@ -109,7 +109,7 @@ cs_pin: PB9
spi_software_mosi_pin: PG6
spi_software_miso_pin: PG7
spi_software_sclk_pin: PG8
run_current: 0.8
run_current: 1
stealthchop_threshold: 0
## Z1 Stepper - Rear Left on Motor5
@ -126,7 +126,7 @@ cs_pin: PG14
spi_software_mosi_pin: PG6
spi_software_miso_pin: PG7
spi_software_sclk_pin: PG8
run_current: 0.800
run_current: 1
stealthchop_threshold: 0
## Z2 Stepper - Rear Right on Motor6
@ -143,7 +143,7 @@ cs_pin: PG10
spi_software_mosi_pin: PG6
spi_software_miso_pin: PG7
spi_software_sclk_pin: PG8
run_current: 0.800
run_current: 1
stealthchop_threshold: 0
## Z3 Stepper - Front Right on Motor7
@ -160,7 +160,7 @@ cs_pin: PD5
spi_software_mosi_pin: PG6
spi_software_miso_pin: PG7
spi_software_sclk_pin: PG8
run_current: 0.800
run_current: 1
stealthchop_threshold: 0
#####################################################################
@ -532,18 +532,19 @@ feedrate_splice: 0.3
feedrate_normal: 1.0
auto_load_speed: 2
auto_cancel_variation: 0.1
#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [input_shaper]
#*# shaper_type_x = mzv
#*# shaper_freq_x = 49.4
#*# shaper_freq_x = 46.0
#*# shaper_type_y = zv
#*# shaper_freq_y = 62.0
#*# shaper_freq_y = 59.0
#*#
#*# [probe]
#*# z_offset = -1.875
#*#
#*# [extruder]
#*#
#*# [heater_bed]
#*# [heater_bed]