iot-firmware/src/espmega_iot_core.cpp

#include <espmega_iot_core.hpp>

// OS Configuration
// #define FASTBOOT

#ifndef ESPMEGA_REV
#define ESPMEGA_REV "ESPMega PRO R3.3b"
#endif

// Network Connectivity
char HOSTNAME[15];
IPAddress IP(0, 0, 0, 0);
IPAddress SUBNET(0, 0, 0, 0);
IPAddress GATEWAY(0, 0, 0, 0);
IPAddress DNS(0, 0, 0, 0);
IPAddress MQTT_SERVER(0, 0, 0, 0);
uint16_t MQTT_PORT = 0;
#ifdef ENABLE_WEBUI
WebServer otaserver(80);
#endif
bool standalone = true;
char MQTT_BASE_TOPIC[20];
uint8_t base_topic_length = 0;
char STATE_REQUEST_TOPIC[40];
bool MQTT_USE_AUTH = false;
char MQTT_USERNAME[32];
char MQTT_PASSWORD[32];
uint8_t utc_offset = 7;
#ifdef ENABLE_CLIMATE_MODULE
float current_room_temp = 0;
float current_room_humid = 0;
#endif

// Inputs
#define VINT_COUNT 16
const int DEBOUNCE_TIME_MS = 50;
const int virtual_interrupt_pins[VINT_COUNT] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15};
int virtual_interupt_state[VINT_COUNT];
unsigned long virtual_interupt_timer[VINT_COUNT];

// Outputs
#define PWM_COUNT 16
const uint8_t pwm_pins[PWM_COUNT] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15};
bool pwm_states[PWM_COUNT];
uint8_t pwm_states_eeprom[PWM_COUNT];
uint16_t pwm_values[PWM_COUNT];
uint8_t pwm_values_eeprom[PWM_COUNT * 2];
// output = m*input+c
const float pwm_linear_scaling_m[PWM_COUNT] = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1};
const float pwm_linear_scaling_c[PWM_COUNT] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
#define PWM_CYCLE_VALUES_COUNT 3
const int PWM_CYCLE_VALUES[PWM_CYCLE_VALUES_COUNT] = {50, 125, 255};
char PWM_SET_STATE_TOPIC[70];
char PWM_SET_VALUE_TOPIC[70];

#ifdef ENABLE_INTERNAL_LCD
// LCD
int lcd_current_page = 1;
int lcd_pwmAdj_id = 0;
EasyNex panel(Serial);
#endif

// Air Conditioner Control
/*
Mode 0: Off, 1: Cool, 2: Fan
Fan Speed 0: Auto, 1: High, 2: Mid, 3: Low
*/
#ifdef ENABLE_CLIMATE_MODULE
#define DHT22_PIN 32
uint8_t ac_mode = 0;
uint8_t ac_fan_speed = 0;
uint8_t ac_temperature = 25;
char AC_SET_MODE_TOPIC[75];
char AC_SET_FAN_TOPIC[75];
char AC_SET_TEMPERATURE_TOPIC[75];
char AC_MODE_TOPIC[75];
char AC_FAN_TOPIC[75];
char AC_TEMPERATURE_TOPIC[75];
char AC_ROOM_TEMPERATURE_TOPIC[75];
char AC_HUMIDITY_TOPIC[75];
#endif

// EEPROM ADDRESS
#define EEPROM_ADDRESS_AC_MODE 0         // 01bytes
#define EEPROM_ADDRESS_AC_TEMPERATURE 1  // 01bytes
#define EEPROM_ADDRESS_AC_FAN_SPEED 2    // 01bytes
#define EEPROM_ADDRESS_PWM_STATE 3       // 16bytes, thru 18
#define EEPROM_ADDRESS_PWM_VALUE 19      // 32bytes, thru 50
#define EEPROM_ADDRESS_HOSTNAME 65       // 15bytes, thru 79
#define EEPROM_ADDRESS_TOPIC 80          // 20bytes, thru 99
#define EEPROM_ADDRESS_IP 100            // 04bytes, thru 103
#define EEPROM_ADDRESS_SUBNET 104        // 04bytes, thru 107
#define EEPROM_ADDRESS_GATEWAY 108       // 04bytes, thru 111
#define EEPROM_ADDRESS_DNS 112           // 04bytes, thru 115
#define EEPROM_ADDRESS_MQTT_SERVER 116   // 04bytes, thru 119
#define EEPROM_ADDRESS_MQTT_PORT 120     // 02bytes, thru 121
#define EEPROM_ADDRESS_MQTT_USERNAME 122 // 32bytes, thru 153
#define EEPROM_ADDRESS_MQTT_PASSWORD 154 // 32bytes, thru 185
#define EEPROM_ADDRESS_MQTT_USEAUTH 186  // 1bytes

char PWM_STATE_TOPIC[75];
char PWM_VALUE_TOPIC[75];
char INPUTS_TOPIC[75];

WiFiClient eth;
PubSubClient mqtt(MQTT_SERVER, 1883, eth);

#ifdef ENABLE_CLIMATE_MODULE
DHTNEW env_sensor(DHT22_PIN);
#endif

Thread mqtt_reconnector = Thread();
Thread environment_reporter = Thread();
Thread eeprom_pwm_updater = Thread();
Thread user_timer_tick = Thread();
StaticThreadController<4> thread_controller(&mqtt_reconnector, &environment_reporter, &eeprom_pwm_updater, &user_timer_tick);

#ifdef ENABLE_INTERNAL_LCD
Thread top_bar_updater = Thread();
Thread page_updater = Thread();
StaticThreadController<2> lcd_thread_controller(&top_bar_updater, &page_updater);
#endif

void setup()
{
  Serial.begin(115200);
#ifdef ENABLE_EXTERNAL_LCD
  Serial2.begin(115200, SERIAL_8N1, RXD2, TXD2);
#endif
#ifdef ENABLE_INTERNAL_LCD
  panel.begin(115200);
#endif
  Serial.println("ESPMega R3 Initializing");
  ESPMega_begin();
  io_begin();
  eeprom_retrieve_init();
  user_pre_init();
#ifdef ENABLE_INTERNAL_LCD
  lcd_send_stop_bit();
  lcd_init();
  lcd_begin();
#endif
  check_boot_reset();
#ifdef ENABLE_EXTERNAL_LCD
  Serial2.print("rest");
  Serial2.write(0xFF);
  Serial2.write(0xFF);
  Serial2.write(0xFF);
#endif
  lcd_send_command("boot_state.txt=\"Core Initializing . . .\"");
  Serial.println("Initializing Infrared . . .");
#ifdef ENABLE_IR_MODULE
  lcd_send_command("boot_state.txt=\"Infrared Initializing . . .\"");
  IrReceiver.begin(IR_RECIEVE_PIN);
  IrSender.begin(IR_SEND_PIN);
#endif
  lcd_send_command("boot_state.txt=\"Network Initializing . . .\"");
  network_begin();
  lcd_send_command("boot_state.txt=\"IoT Core Initializing . . .\"");
  mqtt.setSocketTimeout(1000);
  eth.setTimeout(1);
  mqtt.setCallback(&mqtt_callback);
  mqtt_connect();
  lcd_send_command("boot_state.txt=\"Threads Initializing . . .\"");
  thread_initialization();
#ifdef ENABLE_WEBUI
  ota_begin();
#endif
  Serial.println("Initialization Completed.");
  Serial.println("Jumping to User Code.");
  user_init();
  lcd_send_command("page dashboard");
}

void loop()
{
  virtual_interrupt_loop();
  mqtt.loop();
  ESPMega_loop();
#ifdef ENABLE_IR_MODULE
  ir_loop();
#endif
  thread_controller.run();
#ifdef ENABLE_INTERNAL_LCD
  lcd_loop();
#endif
  user_loop();
#ifdef ENABLE_WEBUI
  otaserver.handleClient();
#endif
}

void eeprom_retrieve_init()
{
// EEPROM Data Retrival
#ifdef ENABLE_CLIMATE_MODULE
  ac_mode = ESPMega_FRAM.read8(EEPROM_ADDRESS_AC_MODE);
  ac_temperature = ESPMega_FRAM.read8(EEPROM_ADDRESS_AC_TEMPERATURE);
  ac_fan_speed = ESPMega_FRAM.read8(EEPROM_ADDRESS_AC_FAN_SPEED);
#endif
// EEPROM Data Retrival Validation
#ifdef ENABLE_CLIMATE_MODULE
  if (ac_mode > 2)
  {
    ac_mode = 0;
    ESPMega_FRAM.write8(EEPROM_ADDRESS_AC_MODE, ac_mode);
  }
  if (ac_temperature > AC_MAX_TEMPERATURE || ac_temperature < AC_MIN_TEMPERATURE)
  {
    ac_temperature = AC_MAX_TEMPERATURE;
    ESPMega_FRAM.write8(EEPROM_ADDRESS_AC_TEMPERATURE, ac_temperature);
  }
  if (ac_fan_speed > 3)
  {
    ac_fan_speed = 0;
    ESPMega_FRAM.write8(EEPROM_ADDRESS_AC_TEMPERATURE, ac_fan_speed);
  }
  ac_set_state(ac_mode, ac_temperature, ac_fan_speed);
#endif
  ESPMega_FRAM.read(EEPROM_ADDRESS_PWM_STATE, pwm_states_eeprom, 16);
  memcpy(pwm_states, pwm_states_eeprom, 16);
  ESPMega_FRAM.read(EEPROM_ADDRESS_PWM_VALUE, pwm_values_eeprom, 32);
  memcpy(pwm_values, pwm_values_eeprom, 32);
  for (int i = 0; i < 15; i++)
  {
    if (pwm_states[i] <= 1)
      pwm_set_state(i, pwm_states[i]);
    else
      pwm_set_state(i, 0);
    if (pwm_values[i] <= 4095)
      pwm_set_value(i, pwm_values[i]);
    else
      pwm_set_value(i, 0);
  }
  IP = eeprom_ip_retrieve(EEPROM_ADDRESS_IP);
  SUBNET = eeprom_ip_retrieve(EEPROM_ADDRESS_SUBNET);
  GATEWAY = eeprom_ip_retrieve(EEPROM_ADDRESS_GATEWAY);
  DNS = eeprom_ip_retrieve(EEPROM_ADDRESS_DNS);
  MQTT_SERVER = eeprom_ip_retrieve(EEPROM_ADDRESS_MQTT_SERVER);
  eeprom_hostname_retrieve();
  eeprom_mqtt_port_retrieve();
  eeprom_mqtt_useauth_retrieve();
  eeprom_mqtt_username_retrieve();
  eeprom_mqtt_password_retrieve();
  mqtt.setServer(MQTT_SERVER, MQTT_PORT);
  eeprom_basetopic_retrieve();
  base_topic_length = strlen(MQTT_BASE_TOPIC) + 1;
  memcpy(STATE_REQUEST_TOPIC, MQTT_BASE_TOPIC, 20);
  strcat(STATE_REQUEST_TOPIC, "/requeststate");
  memcpy(PWM_SET_STATE_TOPIC, MQTT_BASE_TOPIC, 20);
  strcat(PWM_SET_STATE_TOPIC, "/pwm/00/set/state");
  memcpy(PWM_SET_VALUE_TOPIC, MQTT_BASE_TOPIC, 20);
  strcat(PWM_SET_VALUE_TOPIC, "/pwm/00/set/value");
#ifdef ENABLE_CLIMATE_MODULE
  memcpy(AC_SET_MODE_TOPIC, MQTT_BASE_TOPIC, 20);
  strcat(AC_SET_MODE_TOPIC, "/ac/set/mode");
  memcpy(AC_SET_FAN_TOPIC, MQTT_BASE_TOPIC, 20);
  strcat(AC_SET_FAN_TOPIC, "/ac/set/fan_speed");
  memcpy(AC_SET_TEMPERATURE_TOPIC, MQTT_BASE_TOPIC, 20);
  strcat(AC_SET_TEMPERATURE_TOPIC, "/ac/set/temperature");
  memcpy(AC_MODE_TOPIC, MQTT_BASE_TOPIC, 20);
  strcat(AC_MODE_TOPIC, "/ac/mode");
  memcpy(AC_FAN_TOPIC, MQTT_BASE_TOPIC, 20);
  strcat(AC_FAN_TOPIC, "/ac/fan_speed");
  memcpy(AC_TEMPERATURE_TOPIC, MQTT_BASE_TOPIC, 20);
  strcat(AC_TEMPERATURE_TOPIC, "/ac/temperature");
  memcpy(AC_ROOM_TEMPERATURE_TOPIC, MQTT_BASE_TOPIC, 20);
  strcat(AC_ROOM_TEMPERATURE_TOPIC, "/ac/room_temperature");
  memcpy(AC_HUMIDITY_TOPIC, MQTT_BASE_TOPIC, 20);
  strcat(AC_HUMIDITY_TOPIC, "/ac/humidity");
#endif
  memcpy(PWM_STATE_TOPIC, MQTT_BASE_TOPIC, 20);
  strcat(PWM_STATE_TOPIC, "/pwm/00/state");
  memcpy(PWM_VALUE_TOPIC, MQTT_BASE_TOPIC, 20);
  strcat(PWM_VALUE_TOPIC, "/pwm/00/value");
  memcpy(INPUTS_TOPIC, MQTT_BASE_TOPIC, 20);
  strcat(INPUTS_TOPIC, "/input/00");
}

#ifdef ENABLE_WEBUI
void ota_begin()
{
  otaserver.on("/", HTTP_GET, []()
               {
    otaserver.sendHeader("Connection", "close");
    String otabuffer = ota_part1;
    otabuffer+=ota_part2_1+"Hostname"+ota_part2_2+String(HOSTNAME)+ota_part2_3;
    otabuffer+=ota_part2_1+"IP Address"+ota_part2_2+IP.toString()+ota_part2_3;
    otabuffer+=ota_part2_1+"MAC Address"+ota_part2_2+ETH.macAddress()+ota_part2_3;
    otabuffer+=ota_part2_1+"Device"+ota_part2_2+ESPMEGA_REV+ota_part2_3;
    otabuffer+=ota_part2_1+"BMS Server"+ota_part2_2+MQTT_SERVER.toString()+ota_part2_3;
    otabuffer+=ota_part2_1+"BMS Endpoint"+ota_part2_2+String(MQTT_BASE_TOPIC)+ota_part2_3;
    otabuffer+=ota_part2_1+"Centrally Managed"+ota_part2_2;
    if(standalone)
    otabuffer+=String("No");
    else
    otabuffer+=String("Yes");
    otabuffer+=ota_part2_3+ota_part3;
    otaserver.send(200, "text/html", otabuffer); });
  otaserver.on("/config", HTTP_GET, []()
               {
    otaserver.sendHeader("Connection", "close");
    String configbuffer = config_part1;
    configbuffer+=config_txt_part1+"IP Address"+config_txt_part2+"text"+config_txt_part3+"dev_ip"+config_txt_part4+"dev_ip"+config_txt_part5+IP.toString()+config_txt_part6;
    configbuffer+=config_txt_part1+"Network Mask"+config_txt_part2+"text"+config_txt_part3+"netmask"+config_txt_part4+"netmask"+config_txt_part5+SUBNET.toString()+config_txt_part6;
    configbuffer+=config_txt_part1+"Gateway"+config_txt_part2+"text"+config_txt_part3+"gateway"+config_txt_part4+"gateway"+config_txt_part5+GATEWAY.toString()+config_txt_part6;
    configbuffer+=config_txt_part1+"DNS Server"+config_txt_part2+"text"+config_txt_part3+"dns"+config_txt_part4+"dns"+config_txt_part5+DNS.toString()+config_txt_part6;
    configbuffer+=config_txt_part1+"Hostname"+config_txt_part2+"text"+config_txt_part3+"hostname"+config_txt_part4+"hostname"+config_txt_part5+String(HOSTNAME)+config_txt_part6;
    configbuffer+=config_txt_part1+"BMS Server - IP Address"+config_txt_part2+"text"+config_txt_part3+"bms_ip"+config_txt_part4+"bms_ip"+config_txt_part5+MQTT_SERVER.toString()+config_txt_part6;
    configbuffer+=config_txt_part1+"BMS Server - Port"+config_txt_part2+"text"+config_txt_part3+"bms_port"+config_txt_part4+"bms_port"+config_txt_part5+String(MQTT_PORT)+config_txt_part6;
    configbuffer+=config_auth_part1+(MQTT_USE_AUTH?"checked=\"checked\"":"")+config_auth_part2;
    configbuffer+=config_txt_part1+"BMS Server - Username"+config_txt_part2+"text"+config_txt_part3+"bms_username"+config_txt_part4+"bms_username"+config_txt_part5+String(MQTT_USERNAME)+config_txt_part6;
    configbuffer+=config_txt_part1+"BMS Server - Password"+config_txt_part2+"password"+config_txt_part3+"bms_password"+config_txt_part4+"bms_password"+config_txt_part5+String(MQTT_PASSWORD)+config_txt_part6;
    configbuffer+=config_txt_part1+"BMS Server - Endpoint"+config_txt_part2+"text"+config_txt_part3+"bms_endpoint"+config_txt_part4+"bms_endpoint"+config_txt_part5+String(MQTT_BASE_TOPIC)+config_txt_part6;
    configbuffer+=config_part2;
    otaserver.send(200, "text/html", configbuffer); });

  otaserver.on("/save_config", HTTP_GET, []()
               {
    otaserver.sendHeader("Connection", "close");
    String configbuffer = "Configuration Saved. Rebooting . . .";
    otaserver.send(200, "text/html", configbuffer);
    bool use_auth = false;
    for(int i=0;i<otaserver.args();i++) {
      String arg = otaserver.argName(i);
      String value = otaserver.arg(i);
      if(!arg.compareTo("dev_ip")) {
        set_ip(value);
      } else if(!arg.compareTo("netmask")) {
        set_netmask(value);
      } else if(!arg.compareTo("gateway")) {
        set_gw(value);
      } else if(!arg.compareTo("dns")) {
        set_dns(value);
      } else if(!arg.compareTo("hostname")) {
        set_hostname(value);
      } else if(!arg.compareTo("bms_ip")) {
        set_mqtt_server(value);
      }  else if(!arg.compareTo("bms_username")) {
        set_mqtt_username(value);
      }else if(!arg.compareTo("bms_port")) {
        uint16_t port = value.toInt();
        mqtt_port_set(port);
      }else if(!arg.compareTo("bms_endpoint")) {
        set_basetopic(value);
      }
       else if(!arg.compareTo("bms_password")) {
        set_mqtt_password(value);
      } else if(!arg.compareTo("bms_useauth")) {
        if(!value.compareTo("yes"))
          use_auth = true;
      }
    }
      set_mqtt_useauth(use_auth);
      otaserver.send(200, "text/html", configbuffer); 
      delay(500);
      ESP.restart(); });

  otaserver.on(
      "/update", HTTP_POST, []()
      {
    otaserver.sendHeader("Connection", "close");
    otaserver.send(200, "text/plain", (Update.hasError()) ? "FAIL" : "OK");
    ESP.restart(); },
      []()
      {
        HTTPUpload &upload = otaserver.upload();
        if (upload.status == UPLOAD_FILE_START)
        {
          lcd_send_command("page ota");
          Serial.println(upload.currentSize);

          String otafiletxt = "Downloading File : " + upload.filename;
#ifdef ENABLE_INTERNAL_LCD
          lcd_send_stop_bit();
          panel.writeStr("otatxt.txt", otafiletxt);
#endif
          Serial.printf("Update: %s\n", upload.filename.c_str());
          if (!Update.begin(UPDATE_SIZE_UNKNOWN))
          {
#ifdef ENABLE_INTERNAL_LCD
            panel.writeStr("otatxt.txt", "Update Failed, Rebooting . . .");
#endif
            Update.printError(Serial);
          }
        }
        else if (upload.status == UPLOAD_FILE_WRITE)
        {
          if (Update.write(upload.buf, upload.currentSize) != upload.currentSize)
          {
#ifdef ENABLE_INTERNAL_LCD
            panel.writeStr("otatxt.txt", "Update Failed, Rebooting . . .");
#endif
            Update.printError(Serial);
          }
          if (upload.currentSize != 0 && upload.totalSize != 0)
          {
            lcd_send_stop_bit();
            uint32_t totalsize_kb = upload.totalSize / 1000;
            uint32_t upload_pct = 100 * upload.totalSize / 1000000;
            String otafiletxt = "Downloading File : " + upload.filename + " (" + String(totalsize_kb) + "KB)";
#ifdef ENABLE_INTERNAL_LCD
            panel.writeNum("prog.val", upload_pct);
            panel.writeStr("otatxt.txt", otafiletxt);
#endif
          }
        }
        else if (upload.status == UPLOAD_FILE_END)
        {
          if (Update.end(true))
          {
#ifdef ENABLE_INTERNAL_LCD
            panel.writeStr("otatxt.txt", "Update Completed, Rebooting . . .");
#endif
            Serial.printf("Update Success: %u\nRebooting...\n", upload.totalSize);
          }
          else
          {
#ifdef ENABLE_INTERNAL_LCD
            panel.writeStr("otatxt.txt", "Update Failed, Rebooting . . .");
#endif
            Update.printError(Serial);
          }
        }
      });
  otaserver.begin();
}
#endif

void io_begin()
{
  Serial.println("Initializing I/O . . .");
#ifdef ENABLE_IR_MODULE
  pinMode(IR_RECIEVE_PIN, INPUT_PULLUP);
  pinMode(IR_SEND_PIN, OUTPUT);
#endif
}

void network_begin()
{
  Serial.print("Initializing Network ");
  ETH.begin();
  ETH.setHostname(HOSTNAME);
  ETH.config(IP, GATEWAY, SUBNET, DNS, DNS);
#ifndef FASTBOOT
  delay(1000);
  lcd_send_command("boot_state.txt=\"Ethernet Core Initializing      \"");
  delay(500);
  lcd_send_command("boot_state.txt=\"Ethernet Core Initializing .    \"");
  delay(500);
  lcd_send_command("boot_state.txt=\"Ethernet Core Initializing . . \"");
  delay(500);
  lcd_send_command("boot_state.txt=\"Ethernet Core Initializing . . .\"");
  delay(500);
  lcd_send_command("boot_state.txt=\"NTP Core Initializing . . .\"");
  delay(500);
#endif
  char ntp[19];
  MQTT_SERVER.toString().toCharArray(ntp, 19);
  ESPMega_configNTP(utc_offset * 3600, 0, ntp);
  ESPMega_updateTimeFromNTP();
  Serial.println();
}

void mqtt_connect()
{
  if (!mqtt.connected())
  {
    Serial.print("MQTT not connected, connecting . . .\n");
    lcd_send_stop_bit();
    if (MQTT_USE_AUTH)
      mqtt.connect(HOSTNAME, MQTT_USERNAME, MQTT_PASSWORD);
    else
      mqtt.connect(HOSTNAME);
    if (mqtt.connected())
    {
      mqtt_subscribe();
      Serial.print("MQTT connected\n");
      lcd_send_stop_bit();
      publish_pwm_states();
      publish_input_states();
#ifdef ENABLE_CLIMATE_MODULE
      publish_ac_state();
#endif
      mqtt_connected_user_callback();
      standalone = false;
      ESPMega_updateTimeFromNTP();
    }
    else
    {
      standalone = true;
      Serial.print("MQTT not connected, continuing in standalone mode\n");
      lcd_send_stop_bit();
    }
    lcd_send_stop_bit();
#ifdef ENABLE_INTERNAL_LCD
    lcd_refresh();
    lcd_top_bar_update();
#endif
  }
}

void mqtt_subscribe()
{
  for (int i = 0; i < PWM_COUNT; i++)
  {
    PWM_SET_VALUE_TOPIC[base_topic_length + 4] = ((i - i % 10) / 10) + '0';
    PWM_SET_VALUE_TOPIC[base_topic_length + 5] = (i % 10) + '0';
    PWM_SET_STATE_TOPIC[base_topic_length + 4] = ((i - i % 10) / 10) + '0';
    PWM_SET_STATE_TOPIC[base_topic_length + 5] = (i % 10) + '0';
    mqtt.subscribe(PWM_SET_STATE_TOPIC);
    mqtt.subscribe(PWM_SET_VALUE_TOPIC);
  }
#ifdef ENABLE_CLIMATE_MODULE
  mqtt.subscribe(AC_SET_FAN_TOPIC);
  mqtt.subscribe(AC_SET_TEMPERATURE_TOPIC);
  mqtt.subscribe(AC_SET_MODE_TOPIC);
#endif
  mqtt.subscribe(STATE_REQUEST_TOPIC);
}

void mqtt_callback(char *topic, byte *payload, unsigned int length)
{
  uint8_t topic_length = strlen(topic);
  char topic_trim[50];
  char payload_nt[length + 1];
  memcpy(payload_nt, payload, length);
  payload_nt[length] = NULL;
  strncpy(topic_trim, topic + base_topic_length - 1, topic_length);
  if ((!strncmp(topic_trim, "/pwm/", 5)) && !strncmp(topic_trim + 7, "/set/state", 10))
  {
    pwm_state_callback(topic_trim, topic_length, payload_nt, length);
  }
  else if ((!strncmp(topic_trim, "/pwm/", 5)) && !strncmp(topic_trim + 7, "/set/value", 10))
  {
    pwm_value_callback(topic_trim, topic_length, payload_nt, length);
  } else if(!strcmp(topic,STATE_REQUEST_TOPIC)) {
    state_request_callback();
  }
  else
  {
    ac_state_callback(topic, topic_length, payload_nt, length);
  }
  user_mqtt_callback(topic, topic_length, payload_nt, length);
}

void thread_initialization()
{
  Serial.println("Initializing Threads . . .");
  Serial.println("Initializing MQTT Thread . . .");
  mqtt_reconnector.onRun(mqtt_connect);
  mqtt_reconnector.setInterval(15000);
#ifdef ENABLE_CLIMATE_MODULE
  environment_reporter.onRun(publish_env_state);
  environment_reporter.setInterval(5000);
#endif
  eeprom_pwm_updater.onRun(eeprom_pwm_update);
  eeprom_pwm_updater.setInterval(1000);
  user_timer_tick.onRun(timer_tick_callback);
  user_timer_tick.setInterval(15000);
}

void pwm_state_callback(char *topic, uint8_t topic_length, char *payload, unsigned int payload_length)
{
  int a = topic[5] - '0';
  int b = topic[6] - '0';
  int id = 10 * a + b;
  if (!strcmp(payload, "on"))
  {
    pwm_set_state(id, true);
  }
  else if (!strcmp(payload, "off"))
  {
    pwm_set_state(id, false);
  }
}

void pwm_value_callback(char *topic, uint8_t topic_length, char *payload, unsigned int payload_length)
{
  int a = topic[5] - '0';
  int b = topic[6] - '0';
  int id = 10 * a + b;
  int value = atoi(payload);
  pwm_set_value(id, value);
}

void virtual_interrupt_callback(int pin, int state)
{

  publish_input_state(pin, state);
#ifdef ENABLE_INTERNAL_LCD
  if (lcd_current_page == 2)
    panel.writeNum("I" + String(pin) + ".val", state);
#endif
  virtual_interrupt_user_callback(pin, state);
}

void virtual_interrupt_loop()
{
  for (int i = 0; i < 16; i++)
  {
    int current_pin_value = ESPMega_digitalRead(virtual_interrupt_pins[i]);
    if (virtual_interupt_state[i] != current_pin_value)
    {
      if (millis() - virtual_interupt_timer[i] > DEBOUNCE_TIME_MS)
      {
        virtual_interupt_state[i] = current_pin_value;
        virtual_interrupt_callback(i, current_pin_value);
      }
    }
    else
    {
      virtual_interupt_timer[i] = millis();
    }
    yield();
  }
}

void publish_pwm_states()
{
  for (int i = 0; i < PWM_COUNT; i++)
  {
    publish_pwm_state(i);
  }
}

void publish_pwm_state(int id)
{
  int state = pwm_states[id];
  int value = pwm_values[id];
  PWM_STATE_TOPIC[base_topic_length + 4] = ((id - id % 10) / 10) + '0';
  PWM_STATE_TOPIC[base_topic_length + 5] = (id % 10) + '0';
  PWM_VALUE_TOPIC[base_topic_length + 4] = ((id - id % 10) / 10) + '0';
  PWM_VALUE_TOPIC[base_topic_length + 5] = (id % 10) + '0';
  if (state == 1)
  {
    mqtt.publish(PWM_STATE_TOPIC, "on");
  }
  else if (state == 0)
  {
    mqtt.publish(PWM_STATE_TOPIC, "off");
  }
  char temp[6];
  itoa(value, temp, DEC);
  mqtt.publish(PWM_VALUE_TOPIC, temp);
}

void pwm_set_state(int id, int state)
{
  if (state != pwm_states[id])
  {
    pwm_states[id] = state;
    int pwm_value = pwm_values[id];
    ESPMega_analogWrite(pwm_pins[id], state * (int)(pwm_linear_scaling_m[id] * pwm_value + pwm_linear_scaling_c[id]));
#ifdef ENABLE_INTERNAL_LCD
    if (lcd_current_page == 3)
      panel.writeNum("j" + String(id) + ".ppic", pwm_states[id] ? 33 : 48);
    else if (lcd_current_page == 5 && id == lcd_pwmAdj_id)
      panel.writeStr("pwm_state.txt", pwm_states[lcd_pwmAdj_id] ? "ON" : "OFF");
#endif
    publish_pwm_state(id);
    pwm_changed_user_callback(id);
  }
}

void pwm_set_value(int id, int value)
{
  pwm_values[id] = value;
  int pwm_state = pwm_states[id];
  ESPMega_analogWrite(pwm_pins[id], pwm_state * (int)(pwm_linear_scaling_m[id] * value + pwm_linear_scaling_c[id]));
#ifdef ENABLE_INTERNAL_LCD
  if (lcd_current_page == 3)
    panel.writeNum("j" + String(id) + ".val", int(value / 4095.0 * 100.0));
  else if (lcd_current_page == 5 && id == lcd_pwmAdj_id)
    panel.writeNum("pwm_value.val", pwm_values[lcd_pwmAdj_id]);
#endif
  publish_pwm_state(id);
  pwm_changed_user_callback(id);
}

void pwm_toggle(int id)
{
  int state = !pwm_states[id];
  pwm_set_state(id, state);
}

void pwm_toggle(int id1, int id2)
{
  boolean state = pwm_group_state(id1, id2);
  if (state)
  {
    pwm_set_state(id1, 0);
    pwm_set_state(id2, 0);
  }
  else
  {
    pwm_set_state(id1, 1);
    pwm_set_state(id2, 1);
  }
}

boolean pwm_group_state(int id1, int id2)
{
  int state1 = pwm_states[id1 - 1], state2 = pwm_states[id2 - 1];
  if (state1 || state2)
    return true;
  return false;
}

void pwm_cycle_value(int id)
{
  int state = pwm_states[id];
  int value = pwm_values[id];
  if (state == 1)
    for (int i = 0; i < PWM_CYCLE_VALUES_COUNT; i++)
    {
      if (PWM_CYCLE_VALUES[i] == value)
      {
        if (i > 0)
        {
          pwm_set_value(id, PWM_CYCLE_VALUES[i - 1]);
          return;
        }
        else
        {
          pwm_set_state(id, 0);
          return;
        }
      }
    }
  pwm_set_state(id, 1);
  pwm_set_value(id, PWM_CYCLE_VALUES[PWM_CYCLE_VALUES_COUNT - 1]);
}

void publish_input_states()
{
  for (int i = 0; i < VINT_COUNT; i++)
  {
    publish_input_state(i);
  }
}
void publish_input_state(int id)
{
  int state = ESPMega_digitalRead(virtual_interrupt_pins[id]);
  publish_input_state(id, state);
}

void publish_input_state(int id, int state)
{
  INPUTS_TOPIC[base_topic_length + 6] = ((id - id % 10) / 10) + '0';
  INPUTS_TOPIC[base_topic_length + 7] = (id % 10) + '0';
  mqtt.publish(INPUTS_TOPIC, state ? "1" : "0");
}

void state_request_callback()
{
  publish_input_states();
  publish_pwm_states();
#ifdef ENABLE_CLIMATE_MODULE
  publish_ac_state();
#endif
  user_state_request_callback();
}

#ifdef ENABLE_IR_MODULE
void ir_loop()
{
  if (IrReceiver.decode())
  {
    IrReceiver.resume();
  }
}
#endif

#ifdef ENABLE_CLIMATE_MODULE
void publish_ac_state()
{
  switch (ac_mode)
  {
  case 0:
    mqtt.publish(AC_MODE_TOPIC, "off");
    break;
  case 1:
    mqtt.publish(AC_MODE_TOPIC, "cool");
    break;
  case 2:
    mqtt.publish(AC_MODE_TOPIC, "fan_only");
  default:
    break;
  }
  char temp[5];
  itoa(ac_temperature, temp, DEC);
  mqtt.publish(AC_TEMPERATURE_TOPIC, temp);
  switch (ac_fan_speed)
  {
  case 0:
    mqtt.publish(AC_FAN_TOPIC, "auto");
    break;
  case 1:
    mqtt.publish(AC_FAN_TOPIC, "high");
    break;
  case 2:
    mqtt.publish(AC_FAN_TOPIC, "med");
    break;
  case 3:
    mqtt.publish(AC_FAN_TOPIC, "low");
    break;
  }
}

void ac_state_callback(char *topic, uint8_t topic_length, char *payload, unsigned int payload_length)
{
  if (!strcmp(topic, AC_SET_TEMPERATURE_TOPIC))
  {
    int new_temp = atoi(payload);
    if (new_temp >= AC_MIN_TEMPERATURE && new_temp <= AC_MAX_TEMPERATURE)
    {
      ac_set_state(ac_mode, new_temp, ac_fan_speed);
    }
  }
  else if (!strcmp(topic, AC_SET_MODE_TOPIC))
  {
    if (!strcmp(payload, "off"))
    {
      ac_set_state(0, ac_temperature, ac_fan_speed);
    }
    else if (!strcmp(payload, "cool"))
    {
      ac_set_state(1, ac_temperature, ac_fan_speed);
    }
    else if (!strcmp(payload, "fan_only"))
    {
      ac_set_state(2, ac_temperature, ac_fan_speed);
    }
  }
  else if (!strcmp(topic, AC_SET_FAN_TOPIC))
  {
    if (!strcmp(payload, "auto"))
    {
      ac_set_state(ac_mode, ac_temperature, 0);
    }
    else if (!strcmp(payload, "low"))
    {
      ac_set_state(ac_mode, ac_temperature, 1);
    }
    else if (!strcmp(payload, "med"))
    {
      ac_set_state(ac_mode, ac_temperature, 2);
    }
    else if (!strcmp(payload, "high"))
    {
      ac_set_state(ac_mode, ac_temperature, 3);
    }
  }
}

void ac_set_state(int mode, int temperature, int fan_speed)
{
  ac_mode = mode;
  ac_temperature = temperature;
  if (ac_temperature < AC_MIN_TEMPERATURE)
    ac_temperature = AC_MIN_TEMPERATURE;
  else if (ac_temperature > AC_MAX_TEMPERATURE)
    ac_temperature = AC_MAX_TEMPERATURE;
  ac_fan_speed = fan_speed;
  temperature -= AC_MIN_TEMPERATURE;
#ifdef ENABLE_INTERNAL_LCD
  if (lcd_current_page == 4)
  {
    lcd_ac_refresh_fan();
    lcd_ac_refresh_mode();
    if (ac_mode != 2)
      panel.writeStr("temp.txt", String(ac_temperature) + "C");
    else
      panel.writeStr("temp.txt", "--C");
  }
#endif
  publish_ac_state();
  uint8_t ac_datablock[3] = {ac_mode, ac_temperature, ac_fan_speed};
  ESPMega_FRAM.write(0, ac_datablock, 3);
  switch (mode)
  {
  case 0:
    IrSender.sendRaw(ir_code_off, sizeof(ir_code_off) / sizeof(ir_code_off[0]), NEC_KHZ);
    break;
  case 1:
    IrSender.sendRaw(ir_code_cool[fan_speed][temperature], sizeof(ir_code_cool[fan_speed][temperature]) / sizeof(ir_code_cool[fan_speed][temperature][0]), NEC_KHZ);
    break;
  case 2:
    IrSender.sendRaw(ir_code_fan[fan_speed], sizeof(ir_code_fan[fan_speed]) / sizeof(ir_code_fan[fan_speed][0]), NEC_KHZ);
    break;
  }
  ac_changed_user_callback(mode, ac_temperature, fan_speed);
}

void publish_env_state()
{
  int errorCode = env_sensor.read();
  yield();
  switch (errorCode)
  {
  case DHTLIB_OK:
    current_room_humid = env_sensor.getHumidity();
    current_room_temp = env_sensor.getTemperature();
    char temp[5];
    dtostrf(current_room_temp, 0, 2, temp);
    mqtt.publish(AC_ROOM_TEMPERATURE_TOPIC, temp);
    dtostrf(current_room_humid, 0, 2, temp);
    mqtt.publish(AC_HUMIDITY_TOPIC, temp);
    mqtt.loop();
#ifdef ENABLE_INTERNAL_LCD
    if (lcd_current_page == 4)
    {
      Serial.printf("roomtemp.txt=\"%.01fC\"", current_room_temp);
      lcd_send_stop_bit();
      Serial.printf("roomhumid.txt=\"%d%%\"", (int)current_room_humid);
      lcd_send_stop_bit();
    }
#endif
    break;
  default:
    mqtt.publish(AC_ROOM_TEMPERATURE_TOPIC, "ERROR");
    mqtt.loop();
    mqtt.publish(AC_HUMIDITY_TOPIC, "ERROR");
    mqtt.loop();
  }
}
#endif

#ifdef ENABLE_INTERNAL_LCD
void lcd_begin()
{
  top_bar_updater.onRun(lcd_top_bar_update);
  top_bar_updater.setInterval(10000);
  page_updater.onRun(lcd_refresh_pd);
  page_updater.setInterval(5000);
  lcd_refresh();
}

void lcd_loop()
{
  lcd_thread_controller.run();
  panel.NextionListen();
  if (panel.currentPageId != lcd_current_page)
  {
    lcd_current_page = panel.currentPageId;
    lcd_refresh();
    lcd_top_bar_update();
  }
}

void lcd_refresh_pd()
{
  if (lcd_current_page == 1)
  {
    lcd_refresh();
  }
}

void lcd_refresh()
{
  switch (lcd_current_page)
  {
  case 1:
    panel.writeStr("hostname.txt", HOSTNAME);
    panel.writeStr("server_address.txt", MQTT_SERVER.toString());
    panel.writeStr("ip_address.txt", IP.toString());
    panel.writeStr("status_txt.txt", standalone ? "Standalone" : "BMS Managed");
    break;
  case 2:
    for (int i = 0; i <= 15; i++)
    {
      panel.writeNum("I" + String(i) + ".val", virtual_interupt_state[i]);
    }
    break;
  case 3:
    for (int i = 0; i <= 15; i++)
    {
      panel.writeNum("j" + String(i) + ".val", int(pwm_values[i] / 4095.0 * 100.0));
      panel.writeNum("j" + String(i) + ".ppic", pwm_states[i] ? 33 : 48);
    }
    break;
  case 4:
#ifdef ENABLE_CLIMATE_MODULE
    Serial.printf("roomtemp.txt=\"%.01fC\"", current_room_temp);
    lcd_send_stop_bit();
    Serial.printf("roomhumid.txt=\"%d%%\"", (int)current_room_humid);
    lcd_send_stop_bit();
    if (ac_mode != 2)
      panel.writeStr("temp.txt", String(ac_temperature) + "C");
    else
      panel.writeStr("temp.txt", "--C");
    lcd_ac_refresh_fan();
    lcd_ac_refresh_mode();
#else
    lcd_send_command("page climate_nomod");
#endif
  case 5:
    panel.writeStr("pwm_id.txt", String("P") + String(lcd_pwmAdj_id));
    panel.writeStr("pwm_state.txt", pwm_states[lcd_pwmAdj_id] ? "ON" : "OFF");
    panel.writeNum("pwm_value.val", pwm_values[lcd_pwmAdj_id]);
    break;
  case 6:
    panel.writeStr("ip_set.txt", IP.toString());
    panel.writeStr("netmask_set.txt", SUBNET.toString());
    panel.writeStr("gateway_set.txt", GATEWAY.toString());
    panel.writeStr("dns_set.txt", DNS.toString());
    panel.writeStr("host_set.txt", HOSTNAME);
    break;
  case 11:
    panel.writeStr("mqttsv_set.txt", MQTT_SERVER.toString());
    panel.writeNum("port_set.val", MQTT_PORT);
    panel.writeStr("topic_set.txt", MQTT_BASE_TOPIC);
    panel.writeStr("user_set.txt", MQTT_USERNAME);
    panel.writeStr("password_set.txt", MQTT_PASSWORD);
    panel.writeNum("use_auth.val", MQTT_USE_AUTH);
    break;
  default:
    break;
  }
}
void lcd_top_bar_update()
{
  char time_buffer[15];
  rtctime_t time = ESPMega_getTime();
  sprintf(time_buffer, "%02d:%02d", time.hours, time.minutes);
  panel.writeStr("time.txt", time_buffer);
  panel.writeNum("server.pic", standalone ? 4 : 5);
  panel.writeNum("lan.pic", ETH.linkUp() ? 3 : 2);
}
#ifdef ENABLE_CLIMATE_MODULE
void lcd_ac_refresh_mode()
{
  // auto high mid low
  panel.writeNum("mode_cool.pic", ac_mode == 1 ? 12 : 13);
  panel.writeNum("mode_fan.pic", ac_mode == 2 ? 22 : 23);
  panel.writeNum("mode_off.pic", ac_mode == 0 ? 24 : 25);
}

void lcd_ac_refresh_fan()
{
  panel.writeNum("fan_auto.pic", ac_fan_speed == 0 ? 14 : 15);
  panel.writeNum("fan_low.pic", ac_fan_speed == 3 ? 18 : 19);
  panel.writeNum("fan_mid.pic", ac_fan_speed == 2 ? 20 : 21);
  panel.writeNum("fan_high.pic", ac_fan_speed == 1 ? 16 : 17);
}
#endif

void trigger0()
{
  if (lcd_pwmAdj_id >= 15)
    lcd_pwmAdj_id = 0;
  else
    lcd_pwmAdj_id++;
  lcd_refresh();
}

void trigger1()
{
  if (lcd_pwmAdj_id <= 0)
    lcd_pwmAdj_id = 15;
  else
    lcd_pwmAdj_id--;
  lcd_refresh();
}

void trigger2()
{
  pwm_toggle(lcd_pwmAdj_id);
}

void trigger3()
{
  int value = panel.readNumber("pwm_value.val");
  lcd_send_stop_bit();
  pwm_set_value(lcd_pwmAdj_id, value);
}
void trigger4()
{
#ifdef ENABLE_CLIMATE_MODULE
  if (ac_temperature < AC_MAX_TEMPERATURE && ac_mode != 2)
    ac_set_state(ac_mode, ac_temperature + 1, ac_fan_speed);
#endif
}

void trigger5()
{
#ifdef ENABLE_CLIMATE_MODULE
  if (ac_temperature > AC_MIN_TEMPERATURE && ac_mode != 2)
    ac_set_state(ac_mode, ac_temperature - 1, ac_fan_speed);
#endif
}

void trigger6()
{
#ifdef ENABLE_CLIMATE_MODULE
  ac_set_state(ac_mode, ac_temperature, 0);
#endif
}

void trigger7()
{
#ifdef ENABLE_CLIMATE_MODULE
  ac_set_state(ac_mode, ac_temperature, 3);
#endif
}

void trigger8()
{
#ifdef ENABLE_CLIMATE_MODULE
  ac_set_state(ac_mode, ac_temperature, 2);
#endif
}

void trigger9()
{
#ifdef ENABLE_CLIMATE_MODULE
  ac_set_state(ac_mode, ac_temperature, 1);
#endif
}

void trigger10()
{
#ifdef ENABLE_CLIMATE_MODULE
  ac_set_state(1, ac_temperature, ac_fan_speed);
#endif
}

void trigger11()
{
#ifdef ENABLE_CLIMATE_MODULE
  ac_set_state(2, ac_temperature, ac_fan_speed);
#endif
}

void trigger12()
{
#ifdef ENABLE_CLIMATE_MODULE
  ac_set_state(0, ac_temperature, ac_fan_speed);
#endif
}
void trigger13()
{
  set_ip(panel.readStr("ip_set.txt"));
  set_netmask(panel.readStr("netmask_set.txt"));
  set_gw(panel.readStr("gateway_set.txt"));
  set_dns(panel.readStr("dns_set.txt"));
  set_hostname(panel.readStr("host_set.txt"));
  delay(100);
  ESP.restart();
}

void trigger14()
{
  Serial.print("page dashboard");
  lcd_send_stop_bit();
}

void trigger15()
{
  set_mqtt_server(panel.readStr("mqttsv_set.txt"));
  set_basetopic(panel.readStr("topic_set.txt"));
  uint16_t port = panel.readNumber("port_set.val");
  mqtt_port_set(port);
  set_mqtt_useauth(panel.readNumber("use_auth.val"));
  set_mqtt_username(panel.readStr("user_set.txt"));
  set_mqtt_password(panel.readStr("password_set.txt"));
  delay(100);
  ESP.restart();
}
#endif // End Internal LCD Code Block

void eeprom_pwm_update()
{
  if (memcmp(pwm_states, pwm_states_eeprom, 16))
  {
    memcpy(pwm_states_eeprom, pwm_states, 16);
    ESPMega_FRAM.write(3, pwm_states_eeprom, 16);
    lcd_send_stop_bit();
  }
  if (memcmp(pwm_values, pwm_values_eeprom, 32))
  {
    memcpy(pwm_values_eeprom, pwm_values, 32);
    ESPMega_FRAM.write(19, pwm_values_eeprom, 32);
    lcd_send_stop_bit();
  }
}

void set_ip(String address)
{
  IP.fromString(address);
  eeprom_ip_update(EEPROM_ADDRESS_IP, IP[0], IP[1], IP[2], IP[3]);
}
void set_netmask(String address)
{
  SUBNET.fromString(address);
  eeprom_ip_update(EEPROM_ADDRESS_SUBNET, SUBNET[0], SUBNET[1], SUBNET[2], SUBNET[3]);
}
void set_dns(String address)
{
  DNS.fromString(address);
  eeprom_ip_update(EEPROM_ADDRESS_DNS, DNS[0], DNS[1], DNS[2], DNS[3]);
}
void set_gw(String address)
{
  GATEWAY.fromString(address);
  eeprom_ip_update(EEPROM_ADDRESS_GATEWAY, GATEWAY[0], GATEWAY[1], GATEWAY[2], GATEWAY[3]);
}
void set_mqtt_server(String address)
{
  MQTT_SERVER.fromString(address);
  eeprom_ip_update(EEPROM_ADDRESS_MQTT_SERVER, MQTT_SERVER[0], MQTT_SERVER[1], MQTT_SERVER[2], MQTT_SERVER[3]);
}
void eeprom_ip_update(uint16_t rom_address, uint8_t byte1, uint8_t byte2, uint8_t byte3, uint8_t byte4)
{
  uint8_t addressblock[4] = {byte1, byte2, byte3, byte4};
  ESPMega_FRAM.write(rom_address, addressblock, 4);
}
IPAddress eeprom_ip_retrieve(uint16_t rom_address)
{
  uint8_t addressblock[4];
  ESPMega_FRAM.read(rom_address, addressblock, 4);
  return IPAddress(addressblock[0], addressblock[1], addressblock[2], addressblock[3]);
}

void set_hostname(String hostname)
{
  hostname.toCharArray(HOSTNAME, 15);
  ESPMega_FRAM.write(EEPROM_ADDRESS_HOSTNAME, (uint8_t *)HOSTNAME, 15);
}

void eeprom_hostname_retrieve()
{
  ESPMega_FRAM.read(EEPROM_ADDRESS_HOSTNAME, (uint8_t *)HOSTNAME, 15);
}

void set_basetopic(String topic)
{
  topic.toCharArray(MQTT_BASE_TOPIC, 20);
  ESPMega_FRAM.write(EEPROM_ADDRESS_TOPIC, (uint8_t *)MQTT_BASE_TOPIC, 20);
}

void eeprom_basetopic_retrieve()
{
  ESPMega_FRAM.read(EEPROM_ADDRESS_TOPIC, (uint8_t *)MQTT_BASE_TOPIC, 20);
}

void mqtt_port_set(uint16_t port)
{
  uint8_t port_arr[2];
  memcpy(port_arr, &port, 2);
  ESPMega_FRAM.write(EEPROM_ADDRESS_MQTT_PORT, port_arr, 2);
}
void eeprom_mqtt_port_retrieve()
{
  uint8_t port_arr[2];
  ESPMega_FRAM.read(EEPROM_ADDRESS_MQTT_PORT, port_arr, 2);
  memcpy(&MQTT_PORT, port_arr, 2);
}

boolean pwm_get_state(int id)
{
  return pwm_states[id];
}

uint16_t pwm_get_value(int id)
{
  return pwm_values[id];
}

boolean input_get_state(int id)
{
  return virtual_interupt_state[id];
}

#ifdef ENABLE_CLIMATE_MODULE
uint8_t ac_get_temperature()
{
  return ac_temperature;
}
uint8_t ac_get_mode()
{
  return ac_mode;
}
uint8_t ac_get_fan_speed()
{
  return ac_fan_speed;
}
#endif

void eeprom_mqtt_username_retrieve()
{
  ESPMega_FRAM.read(EEPROM_ADDRESS_MQTT_USERNAME, (uint8_t *)MQTT_USERNAME, 32);
}
void eeprom_mqtt_password_retrieve()
{
  ESPMega_FRAM.read(EEPROM_ADDRESS_MQTT_PASSWORD, (uint8_t *)MQTT_PASSWORD, 32);
}
void set_mqtt_username(String username)
{
  username.toCharArray(MQTT_USERNAME, 32);
  ESPMega_FRAM.write(EEPROM_ADDRESS_MQTT_USERNAME, (uint8_t *)MQTT_USERNAME, 20);
}
void set_mqtt_password(String password)
{
  password.toCharArray(MQTT_PASSWORD, 32);
  ESPMega_FRAM.write(EEPROM_ADDRESS_MQTT_PASSWORD, (uint8_t *)MQTT_PASSWORD, 20);
}
void eeprom_mqtt_useauth_retrieve()
{
  MQTT_USE_AUTH = ESPMega_FRAM.read8(EEPROM_ADDRESS_MQTT_USEAUTH);
}
void set_mqtt_useauth(bool use_auth)
{
  MQTT_USE_AUTH = use_auth;
  ESPMega_FRAM.write8(EEPROM_ADDRESS_MQTT_USEAUTH, MQTT_USE_AUTH);
}

void factory_reset()
{
  for (int i = 5; i > 0; i--)
  {
    if (digitalRead(2) == HIGH)
    {
      lcd_send_command("boot_state.txt=\"Factory Reset Canceled, Restarting\"");
      delay(5000);
      ESP.restart();
    }
#ifdef ENABLE_INTERNAL_LCD
    Serial.printf("boot_state.txt=\"Factory Reset in %d\"", i);
    lcd_send_stop_bit();
#endif
    delay(1000);
  }
#ifdef ENABLE_INTERNAL_LCD
  lcd_send_command("boot_state.txt=\"Factory Reseting . . .\"");
#endif
  // Format FRAM
  for (int i = 0; i < 32768; i++)
  {
    ESPMega_FRAM.write8(i, 0);
  }
  // Load Default Values
  set_ip("192.168.0.10");
  set_gw("192.168.0.1");
  set_netmask("255.255.255.0");
  // Reboot
#ifdef ENABLE_INTERNAL_LCD
  lcd_send_stop_bit();
  lcd_send_command("boot_state.txt=\"Factory Reset OK. Release Button.\"");
  delay(3000);
#endif
  ESP.restart();
}
void check_boot_reset()
{
  pinMode(2, INPUT_PULLUP);
  if (digitalRead(2) == LOW)
  {
    factory_reset();
  }
}