initial migration from String to string
This commit is contained in:
parent
77ca96007b
commit
d7b8af258a
|
|
@ -19,7 +19,6 @@ uint16_t MQTT_PORT = 0;
|
|||
WebServer otaserver(80);
|
||||
#endif
|
||||
bool standalone = true;
|
||||
// #define MQTT_BASE_TOPIC "/espmega/ProR3"
|
||||
char MQTT_BASE_TOPIC[20];
|
||||
uint8_t base_topic_length = 0;
|
||||
char STATE_REQUEST_TOPIC[40];
|
||||
|
|
@ -104,8 +103,7 @@ char PWM_VALUE_TOPIC[75];
|
|||
char INPUTS_TOPIC[75];
|
||||
|
||||
WiFiClient eth;
|
||||
PubSubClient mqtt_client(MQTT_SERVER, 1883, eth);
|
||||
PubSubClientTools mqtt(mqtt_client);
|
||||
PubSubClient mqtt(MQTT_SERVER, 1883, eth);
|
||||
|
||||
#ifdef ENABLE_CLIMATE_MODULE
|
||||
DHTNEW env_sensor(DHT22_PIN);
|
||||
|
|
@ -159,7 +157,7 @@ void setup()
|
|||
lcd_send_command("boot_state.txt=\"Network Initializing . . .\"");
|
||||
network_begin();
|
||||
lcd_send_command("boot_state.txt=\"IoT Core Initializing . . .\"");
|
||||
mqtt_client.setSocketTimeout(1000);
|
||||
mqtt.setSocketTimeout(1000);
|
||||
eth.setTimeout(1);
|
||||
mqtt_connect();
|
||||
lcd_send_command("boot_state.txt=\"Threads Initializing . . .\"");
|
||||
|
|
@ -176,7 +174,7 @@ void setup()
|
|||
void loop()
|
||||
{
|
||||
virtual_interrupt_loop();
|
||||
mqtt_client.loop();
|
||||
mqtt.loop();
|
||||
ESPMega_loop();
|
||||
#ifdef ENABLE_IR_MODULE
|
||||
ir_loop();
|
||||
|
|
@ -243,7 +241,7 @@ void eeprom_retrieve_init()
|
|||
eeprom_mqtt_useauth_retrieve();
|
||||
eeprom_mqtt_username_retrieve();
|
||||
eeprom_mqtt_password_retrieve();
|
||||
mqtt_client.setServer(MQTT_SERVER, MQTT_PORT);
|
||||
mqtt.setServer(MQTT_SERVER, MQTT_PORT);
|
||||
eeprom_basetopic_retrieve();
|
||||
base_topic_length = strlen(MQTT_BASE_TOPIC) + 1;
|
||||
memcpy(STATE_REQUEST_TOPIC, MQTT_BASE_TOPIC, 20);
|
||||
|
|
@ -465,15 +463,15 @@ void network_begin()
|
|||
|
||||
void mqtt_connect()
|
||||
{
|
||||
if (!mqtt_client.connected())
|
||||
if (!mqtt.connected())
|
||||
{
|
||||
Serial.print("MQTT not connected, connecting . . .\n");
|
||||
lcd_send_stop_bit();
|
||||
if (MQTT_USE_AUTH)
|
||||
mqtt_client.connect(HOSTNAME, MQTT_USERNAME, MQTT_PASSWORD);
|
||||
mqtt.connect(HOSTNAME, MQTT_USERNAME, MQTT_PASSWORD);
|
||||
else
|
||||
mqtt_client.connect(HOSTNAME);
|
||||
if (mqtt_client.connected())
|
||||
mqtt.connect(HOSTNAME);
|
||||
if (mqtt.connected())
|
||||
{
|
||||
mqtt_subscribe();
|
||||
Serial.print("MQTT connected\n");
|
||||
|
|
@ -509,15 +507,29 @@ void mqtt_subscribe()
|
|||
PWM_SET_VALUE_TOPIC[base_topic_length + 5] = (i % 10) + '0';
|
||||
PWM_SET_STATE_TOPIC[base_topic_length + 4] = ((i - i % 10) / 10) + '0';
|
||||
PWM_SET_STATE_TOPIC[base_topic_length + 5] = (i % 10) + '0';
|
||||
mqtt.subscribe(PWM_SET_STATE_TOPIC, pwm_state_callback);
|
||||
mqtt.subscribe(PWM_SET_VALUE_TOPIC, pwm_value_callback);
|
||||
mqtt.subscribe(PWM_SET_STATE_TOPIC);
|
||||
mqtt.subscribe(PWM_SET_VALUE_TOPIC);
|
||||
}
|
||||
#ifdef ENABLE_CLIMATE_MODULE
|
||||
mqtt.subscribe(AC_SET_FAN_TOPIC, ac_state_callback);
|
||||
mqtt.subscribe(AC_SET_TEMPERATURE_TOPIC, ac_state_callback);
|
||||
mqtt.subscribe(AC_SET_MODE_TOPIC, ac_state_callback);
|
||||
mqtt.subscribe(AC_SET_FAN_TOPIC);
|
||||
mqtt.subscribe(AC_SET_TEMPERATURE_TOPIC);
|
||||
mqtt.subscribe(AC_SET_MODE_TOPIC);
|
||||
#endif
|
||||
mqtt.subscribe(STATE_REQUEST_TOPIC, state_request_callback);
|
||||
mqtt.subscribe(STATE_REQUEST_TOPIC);
|
||||
}
|
||||
|
||||
void mqtt_callback(char* topic, char* payload, unsigned int length) {
|
||||
uint8_t topic_length = strlen(topic);
|
||||
char topic_trim[50];
|
||||
strncpy(topic_trim, topic+topic_length, topic_length);
|
||||
// PWM Callback
|
||||
if((!strncmp(topic_trim,"/pwm/",5)) && !strncmp(topic_trim+7,"/set/state",10)) {
|
||||
pwm_state_callback(topic_trim, topic_length,payload,length);
|
||||
}
|
||||
else if((!strncmp(topic_trim,"/pwm/",5)) && !strncmp(topic_trim+7,"/set/value",10)) {
|
||||
pwm_value_callback(topic_trim, topic_length,payload,length);
|
||||
}
|
||||
user_mqtt_callback(topic_trim,topic_length, payload, length);
|
||||
}
|
||||
|
||||
void thread_initialization()
|
||||
|
|
@ -536,27 +548,27 @@ void thread_initialization()
|
|||
user_timer_tick.setInterval(15000);
|
||||
}
|
||||
|
||||
void pwm_state_callback(String topic, String message)
|
||||
void pwm_state_callback(char* topic, uint8_t topic_length, char* payload, unsigned int payload_length)
|
||||
{
|
||||
int a = topic.charAt(base_topic_length + 4) - '0';
|
||||
int b = topic.charAt(base_topic_length + 5) - '0';
|
||||
int a = topic[5] - '0';
|
||||
int b = topic[6] - '0';
|
||||
int id = 10 * a + b;
|
||||
if (message.compareTo("on") == 0)
|
||||
if (!strcmp(payload,"on"))
|
||||
{
|
||||
pwm_set_state(id, true);
|
||||
}
|
||||
else if (message.compareTo("off") == 0)
|
||||
else if (!strcmp(payload,"off"))
|
||||
{
|
||||
pwm_set_state(id, false);
|
||||
}
|
||||
}
|
||||
|
||||
void pwm_value_callback(String topic, String message)
|
||||
void pwm_value_callback(char* topic, uint8_t topic_length, char* payload, unsigned int payload_length)
|
||||
{
|
||||
int a = topic.charAt(base_topic_length + 4) - '0';
|
||||
int b = topic.charAt(base_topic_length + 5) - '0';
|
||||
int a = topic[5] - '0';
|
||||
int b = topic[6] - '0';
|
||||
int id = 10 * a + b;
|
||||
int value = message.toInt();
|
||||
int value = atoi(payload);
|
||||
pwm_set_value(id, value);
|
||||
}
|
||||
|
||||
|
|
@ -610,13 +622,15 @@ void publish_pwm_state(int id)
|
|||
PWM_VALUE_TOPIC[base_topic_length + 5] = (id % 10) + '0';
|
||||
if (state == 1)
|
||||
{
|
||||
mqtt_client.publish(PWM_STATE_TOPIC, "on");
|
||||
mqtt.publish(PWM_STATE_TOPIC, "on");
|
||||
}
|
||||
else if (state == 0)
|
||||
{
|
||||
mqtt_client.publish(PWM_STATE_TOPIC, "off");
|
||||
mqtt.publish(PWM_STATE_TOPIC, "off");
|
||||
}
|
||||
mqtt.publish(String(PWM_VALUE_TOPIC), String(value));
|
||||
char temp[6];
|
||||
itoa(value,temp,6);
|
||||
mqtt.publish(PWM_VALUE_TOPIC, temp);
|
||||
}
|
||||
|
||||
void pwm_set_state(int id, int state)
|
||||
|
|
@ -723,7 +737,7 @@ void publish_input_state(int id, int state)
|
|||
{
|
||||
INPUTS_TOPIC[base_topic_length + 6] = ((id - id % 10) / 10) + '0';
|
||||
INPUTS_TOPIC[base_topic_length + 7] = (id % 10) + '0';
|
||||
mqtt.publish(String(INPUTS_TOPIC), state ? "1" : "0");
|
||||
mqtt.publish(INPUTS_TOPIC, state ? "1" : "0");
|
||||
}
|
||||
|
||||
void state_request_callback(String topic, String message)
|
||||
|
|
@ -749,38 +763,38 @@ void ir_loop()
|
|||
#ifdef ENABLE_CLIMATE_MODULE
|
||||
void publish_ac_state()
|
||||
{
|
||||
String temp = "";
|
||||
switch (ac_mode)
|
||||
{
|
||||
case 0:
|
||||
temp = "off";
|
||||
mqtt.publish(AC_MODE_TOPIC, "off");
|
||||
break;
|
||||
case 1:
|
||||
temp = "cool";
|
||||
mqtt.publish(AC_MODE_TOPIC, "cool");
|
||||
break;
|
||||
case 2:
|
||||
temp = "fan_only";
|
||||
mqtt.publish(AC_MODE_TOPIC, "fan_only");
|
||||
default:
|
||||
break;
|
||||
}
|
||||
mqtt.publish(String(AC_MODE_TOPIC), temp);
|
||||
mqtt.publish(String(AC_TEMPERATURE_TOPIC), String(ac_temperature));
|
||||
char temp[5];
|
||||
itoa(ac_temperature,temp,DEC);
|
||||
mqtt.publish(AC_TEMPERATURE_TOPIC, temp);
|
||||
switch (ac_fan_speed)
|
||||
{
|
||||
case 0:
|
||||
temp = "auto";
|
||||
mqtt.publish(AC_FAN_TOPIC, "auto");
|
||||
break;
|
||||
case 1:
|
||||
temp = "high";
|
||||
mqtt.publish(AC_FAN_TOPIC, "high");
|
||||
break;
|
||||
case 2:
|
||||
temp = "med";
|
||||
mqtt.publish(AC_FAN_TOPIC, "med");
|
||||
break;
|
||||
case 3:
|
||||
temp = "low";
|
||||
mqtt.publish(AC_FAN_TOPIC, "low");
|
||||
break;
|
||||
}
|
||||
mqtt.publish(String(AC_FAN_TOPIC), temp);
|
||||
|
||||
}
|
||||
|
||||
void ac_state_callback(String topic, String message)
|
||||
|
|
@ -877,10 +891,12 @@ void publish_env_state()
|
|||
case DHTLIB_OK:
|
||||
current_room_humid = env_sensor.getHumidity();
|
||||
current_room_temp = env_sensor.getTemperature();
|
||||
mqtt.publish(String(AC_ROOM_TEMPERATURE_TOPIC), String(current_room_temp));
|
||||
mqtt_client.loop();
|
||||
mqtt.publish(String(AC_HUMIDITY_TOPIC), String(current_room_humid));
|
||||
mqtt_client.loop();
|
||||
char temp[5];
|
||||
dtostrf(current_room_temp, 0, 2, temp);
|
||||
mqtt.publish(AC_ROOM_TEMPERATURE_TOPIC, temp);
|
||||
dtostrf(current_room_humid, 0, 2, temp);
|
||||
mqtt.publish(AC_HUMIDITY_TOPIC, temp);
|
||||
mqtt.loop();
|
||||
#ifdef ENABLE_INTERNAL_LCD
|
||||
if (lcd_current_page == 4)
|
||||
{
|
||||
|
|
@ -892,10 +908,10 @@ void publish_env_state()
|
|||
#endif
|
||||
break;
|
||||
default:
|
||||
mqtt.publish(String(AC_ROOM_TEMPERATURE_TOPIC), "ERROR");
|
||||
mqtt_client.loop();
|
||||
mqtt.publish(String(AC_HUMIDITY_TOPIC), "ERROR");
|
||||
mqtt_client.loop();
|
||||
mqtt.publish(AC_ROOM_TEMPERATURE_TOPIC, "ERROR");
|
||||
mqtt.loop();
|
||||
mqtt.publish(AC_HUMIDITY_TOPIC, "ERROR");
|
||||
mqtt.loop();
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -9,7 +9,6 @@
|
|||
#endif
|
||||
#include <ETH.h>
|
||||
#include <PubSubClient.h>
|
||||
#include <PubSubClientTools.h>
|
||||
#include <Thread.h>
|
||||
#include <StaticThreadController.h>
|
||||
#ifdef ENABLE_IR_MODULE
|
||||
|
|
@ -35,14 +34,15 @@
|
|||
#endif
|
||||
#include "espmega_iot_timer.hpp"
|
||||
|
||||
void mqtt_callback(char* topic, byte* payload, unsigned int length);
|
||||
void virtual_interrupt_loop();
|
||||
void virtual_interrupt_callback(int pin, int state);
|
||||
void network_begin();
|
||||
void mqtt_connect();
|
||||
void mqtt_subscribe();
|
||||
void thread_initialization();
|
||||
void pwm_state_callback(String topic, String message);
|
||||
void pwm_value_callback(String topic, String message);
|
||||
void pwm_state_callback(char* topic, uint8_t topic_length, char* payload, unsigned int payload_length);
|
||||
void pwm_value_callback(char* topic, uint8_t topic_length, char* payload, unsigned int payload_length);
|
||||
void state_request_callback(String topic, String message);
|
||||
void io_begin();
|
||||
void ir_loop();
|
||||
|
|
|
|||
|
|
@ -92,4 +92,8 @@ void mqtt_connected_user_callback() {
|
|||
|
||||
void user_state_request_callback() {
|
||||
|
||||
}
|
||||
|
||||
void user_mqtt_callback(char* topic, uint8_t topic_length, char* payload, unsigned int payload_length) {
|
||||
|
||||
}
|
||||
|
|
@ -7,7 +7,7 @@
|
|||
#include "espmega_iot_external_lcd.hpp"
|
||||
|
||||
// Enable Software Module(s)
|
||||
#define ENABLE_INTERNAL_LCD
|
||||
//#define ENABLE_INTERNAL_LCD
|
||||
#define ENABLE_IR_MODULE
|
||||
#define ENABLE_CLIMATE_MODULE // Require IR Module
|
||||
#define ENABLE_WEBUI
|
||||
|
|
@ -41,7 +41,7 @@ void timer1_callback();
|
|||
void mqtt_connected_user_callback();
|
||||
void bt0PopCallback(void *ptr);
|
||||
void user_state_request_callback();
|
||||
|
||||
void user_mqtt_callback(char* topic, uint8_t topic_length, char* payload, unsigned int payload_length);
|
||||
|
||||
// ESPMega IoT Core Build-in Functions
|
||||
extern void pwm_set_state(int id, int state);
|
||||
|
|
@ -58,5 +58,4 @@ extern uint8_t ac_get_temperature();
|
|||
extern uint8_t ac_get_mode();
|
||||
extern uint8_t ac_get_fan_speed();
|
||||
extern bool standalone;
|
||||
extern PubSubClient mqtt_client;
|
||||
extern PubSubClientTools mqtt;
|
||||
extern PubSubClient mqtt;
|
||||
Loading…
Reference in New Issue