update base code to rev3.3a

Template Project/.vscode/settings.json

@@ -7,6 +7,8 @@
         "unordered_set": "cpp",
         "vector": "cpp",
         "string_view": "cpp",
-        "initializer_list": "cpp"
-    }
+        "initializer_list": "cpp",
+        "adafruit_ads1x15.h": "c"
+    },
+    "cmake.configureOnOpen": true
 }

Template Project/lib/ESPMegaPRO/ESPMegaPRO.cpp

@@ -6,6 +6,7 @@ uint8_t inputBufferB;
 PCF8574 inputBankA(INPUT_BANK_A_ADDRESS);
 PCF8574 inputBankB(INPUT_BANK_B_ADDRESS);
 Adafruit_PWMServoDriver pwmBank = Adafruit_PWMServoDriver(PWM_BANK_ADDRESS);
+I2C_eeprom ESPMega_EEPROM(EEPROM_ADDRESS);
 #ifdef ANALOG_CARD_ENABLE
 Adafruit_ADS1115 analogInputBankA;
 Adafruit_ADS1115 analogInputBankB;
@@ -18,11 +19,11 @@ MCP4725 DAC3(DAC3_ADDRESS);
 void ESPMega_begin()
 {
     Wire.begin(14, 33);
-
     inputBankA.begin();
     inputBankB.begin();
     pwmBank.begin();
-
+    ESPMega_RTC.begin();
+    ESPMega_EEPROM.begin();
     // ESPMegaPRO v3 use the PWMBank to drive Half Bridge
     // Push Pull Output is required.
     pwmBank.setOutputMode(true);
@@ -56,23 +57,28 @@ bool ESPMega_digitalRead(int id)
         refreshInputBankA(); // Only poll if interrupt is not enabled
 #endif
 
-        return ((inputBufferA >> id) & 1); // Extract bit from buffer
+        return ((inputBufferA >> (7 - id)) & 1); // Extract bit from buffer
     }
     if (id >= 8 && id <= 15)
     {
-        id -= 8;
 
 #ifndef USE_INTERRUPT
         refreshInputBankB(); // Only poll if interrupt is not enabled
 #endif
-
-        return ((inputBufferB >> id) & 1); // Extract bit from buffer
+        if (id >= 8 && id <= 11)
+            return ((inputBufferB >> (15 - id)) & 1); // Extract bit from buffer
+        else if (id >= 12 && id <= 15)
+            return ((inputBufferB >> (id - 12)) & 1);
     }
     return false;
 }
 
 void ESPMega_analogWrite(int id, int value)
 {
+    if (id >= 0 && id <= 7)
+        id += 8;
+    else if (id >= 8 && id <= 15)
+        id -= 8;
     pwmBank.setPin(id, value);
 }
 
@@ -103,7 +109,8 @@ int16_t ESPMega_analogRead(int id)
         return analogInputBankB.readADC_SingleEnded(7 - id);
     return 0;
 }
-void ESPMega_dacWrite(int id, int value) {
+void ESPMega_dacWrite(int id, int value)
+{
     switch (id)
     {
     case 0:
@@ -122,4 +129,25 @@ void ESPMega_dacWrite(int id, int value) {
         break;
     }
 }
+
+/* void ESPMega_rtcNTPUpdate()
+{
+    ntpTimeClient.update();
+    if (ntpTimeClient.updated())
+    {
+        int day = ntpTimeClient.getDay();
+        int month = ntpTimeClient.getMonth();
+        int year = ntpTimeClient.getYear();
+        int hours = ntpTimeClient.getHours();
+        int minutes = ntpTimeClient.getMinutes();
+        int seconds = ntpTimeClient.getSeconds();
+        ESPMega_RTC.setYear(year);
+        ESPMega_RTC.setMonth(month);
+        ESPMega_RTC.setDay(day);
+        ESPMega_RTC.setHour(hours);
+        ESPMega_RTC.setMinute(minutes);
+        ESPMega_RTC.setSecond(seconds);
+    }
+} */
+
 #endif

Template Project/lib/ESPMegaPRO/ESPMegaPRO.h

@@ -8,23 +8,28 @@
 #ifdef ANALOG_CARD_ENABLE
 #include <Adafruit_ADS1X15.h>
 #include <MCP4725.h>
+#include <I2C_eeprom.h>
+#include <SparkFunDS1307RTC.h>
 #endif
 
 #define INPUT_BANK_A_ADDRESS 0x21
 #define INPUT_BANK_B_ADDRESS 0x22
 #define PWM_BANK_ADDRESS 0x5F
-#define OUTPUT_BANK_ADDRESS 0x21
-#define EEPROM_ADDRESS 0x22
+#define RTC_ADDRESS 0x68
 #define ANALOG_INPUT_BANK_A_ADDRESS 0x48
 #define ANALOG_INPUT_BANK_B_ADDRESS 0x49
 #define DAC0_ADDRESS 0x60
 #define DAC1_ADDRESS 0x61
 #define DAC2_ADDRESS 0x62
 #define DAC3_ADDRESS 0x63
+#define EEPROM_ADDRESS 0x70
+
+#define ESPMega_RTC rtc
 
 //#define USE_INTERRUPT
 #define INPUT_BANK_A_INTERRUPT 36
 #define INPUT_BANK_B_INTERRUPT 39
+extern I2C_eeprom ESPMega_EEPROM;
 
 /**
  * Initiate ESPMega PRO Internal Components

Template Project/platformio.ini

@@ -18,6 +18,8 @@ lib_deps = adafruit/Adafruit PWM Servo Driver Library@^2.4.1
            adafruit/Adafruit BusIO
            robtillaart/PCF8574@^0.3.7
            arduino-libraries/Arduino_BuiltIn@^1.0.0
-           SPI
+           SPI@^2.0.0
            robtillaart/MCP4725@^0.3.7
+           robtillaart/I2C_EEPROM@^1.7.3
+           sparkfun/SparkFun DS1307 Real-Time Clock (RTC)@^1.0.1
 monitor_speed = 115200

Template Project/src/i2c_scanner.cpp.disabled

@@ -1,4 +1,4 @@
-#include <Arduino.h>
+#include <ESPMegaPRO.h>
 // --------------------------------------
 // i2c_scanner
 //

Template Project/src/rtc_demo.cpp

@@ -0,0 +1,8 @@
+#include <ESPMegaPRO.h>
+void setup() {
+    ESPMega_begin();
+}
+
+void loop() { 
+    delay(5000);
+}