44 lines
1.6 KiB
Markdown
44 lines
1.6 KiB
Markdown
# OctoPrint-Klipper
|
|
|
|
My version of a Docker image for running [OctoPrint] and [Klipper] in a single container. Included a few plugins I find useful.
|
|
|
|
Big thanks to [sillyfrog](https://github.com/sillyfrog) for laying the groundwork for this image.
|
|
|
|
This is very much written for what I needed, so you'll likely need to hack this up for your setup. I've been using it for a little while now and it's going well.
|
|
|
|
## Running the container
|
|
|
|
Create a directory on your host that will persist config files. I use `/home/docker/octoprint-klipper`.
|
|
|
|
Pull the image. Both `arm` and `amd64` images are on DockerHub. If using raspberry pi or similar use `arm` in place of `[tag]`.
|
|
|
|
```shell
|
|
docker pull seanauff/octoprint-klipper:[tag]
|
|
```
|
|
|
|
Start the container once to populate your config folder:
|
|
|
|
```
|
|
docker run -d --name octoprint-klipper -e TZ=America/New_York -v /home/docker/octoprint-klipper:/home/octoprint/.octoprint --device /dev/ttyUSB0:/dev/ttyUSB0 -p 5000:5000 seanauff/octoprint-klipper:[tag]
|
|
```
|
|
|
|
Stop the container, and modify your [Klipper] `printer.cfg` and [Octoprint] `config.yaml` in the config directory as needed.
|
|
|
|
Restart the container.
|
|
|
|
A docker-compose file is also provided.
|
|
|
|
If you have any questions, feel free to log an issue on this project, and I'll see if I can help.
|
|
|
|
## Build the image yourself
|
|
|
|
Clone the repository and build the image:
|
|
|
|
```shell
|
|
git clone https://github.com/seanauff/OctoPrint-Klipper.git
|
|
docker build -t seanauff/octoprint-klipper OctoPrint-Klipper
|
|
```
|
|
|
|
[Octoprint]: https://github.com/foosel/OctoPrint
|
|
[Klipper]: https://github.com/KevinOConnor/klipper
|