diff --git a/WaterishOS-minimal2.0/WaterishOS-minimal2.0.ino b/WaterishOS-minimal2.0/WaterishOS-minimal2.0.ino
index 9a28041..2b50cef 100644
--- a/WaterishOS-minimal2.0/WaterishOS-minimal2.0.ino
+++ b/WaterishOS-minimal2.0/WaterishOS-minimal2.0.ino
@@ -1,15 +1,59 @@
 #include <FlowMeter.h>
 #include <Wire.h>
 #include <Adafruit_MCP23017.h>
+#include <Thread.h>
+#include <ThreadController.h>
 Adafruit_MCP23017 mcp;
-byte ledPin=13;
+String MQTT_SERVER = "";
+String ssid = "";
+String password = "";
 byte InteruptPinA=1;
 byte InteruptPinB=3;
 byte arduinoInterrupt=1;
+long tslr=0;
+WiFiClient espClient;
+PubSubClient client(MQTT_SERVER, 1883, espClient);
+PubSubClientTools mqtt(client);
+ThreadController threadControl = ThreadController();
+Thread mqttupdater = Thread();
+Thread datacollector = Thread();
+boolean online=true;
 FlowMeter sensorA[6]= FlowMeter(1);
 FlowMeter sensorB[6]= FlowMeter(3);
 volatile boolean awakenByInterrupt = false;
+void readA(){
+  uint8_t pin=mcp.getLastInterruptPin();
+  uint8_t val=mcp.getLastInterruptPinValue();
+  for(int sid=0;sid<=5;sid++)sensorA[sid].count();
+}
+void readB(){
+  uint8_t pin=mcp.getLastInterruptPin();
+  uint8_t val=mcp.getLastInterruptPinValue();
+  for(int sid=8;sid<13;sid++)sensorB[sid-8].count();
+}
+void collectdata(){
+    for(int sid=0;sid<=5;sid++)sensorA[sid].tick(1000);
+    for(int sid=8;sid<13;sid++)sensorB[sid-8].tick(1000);
+}
+void updatemqtt(){
+    for()
+}
 void setup(){
+  WiFi.mode(WIFI_STA);
+  WiFi.begin(ssid, password);
+  int connectionattempt=0;
+  while(WiFi.status() != WL_CONNECTED)
+  {
+    //wait for it ... (Wait for Wifi Connection
+    connectionattempt++;
+    delay(500);
+    if(conbnectionattempt>=20){
+      online=false;
+      break();
+    }
+  }
+  attachInterrupt(digitalPinToInterrupt(1),readA,FALLING);
+  attachInterrupt(digitalPinToInterrupt(3),readB,FALLING);
   pinMode(1, FUNCTION_3); 
   pinMode(3, FUNCTION_3); 
   pinMode(1,INPUT);
@@ -21,28 +65,13 @@ void setup(){
     mcp.pinMode(i, INPUT);
     mcp.setupInterruptPin(i,RISING);
     }
+  datacollector.onRun(collectdata);
+  datacollector.setInterval(1000);
+  mqttupdater.onRun(updatemqtt);
+  mqttupdater.setInterval(1000);
+  threadControl.add(&datacollector);
   }
-  // We will setup a pin for flashing from the int routine
-  pinMode(ledPin, OUTPUT);
-}
 
-// The int handler will just signal that the int has happen
-// we will do the work from the main loop.
-void intCallBack(){
-  awakenByInterrupt=true;
-}
-
-void handleInterrupt(){
-  
-  // Get more information from the MCP from the INT
-  uint8_t pin=mcp.getLastInterruptPin();
-  uint8_t val=mcp.getLastInterruptPinValue();
-  for(int sid=0;sid<=5;sid++)sensorA[sid].count();
-  for(int sid=6;sid<11;sid++)sensorA[sid-6].count();
-  cleanInterrupts();
-
-// handy for interrupts triggered by buttons
-// normally signal a few due to bouncing issues
 void loop(){
-  attachInterrupt(arduinoInterrupt,intCallBack,RISING);
+   client.loop();
 }