Add Library

libraries/Adafruit-MCP23017-Arduino-Library-master/examples/toggle/toggle.ino

@@ -0,0 +1,35 @@
+#include <Wire.h>
+#include "Adafruit_MCP23017.h"
+
+// Basic pin reading and pullup test for the MCP23017 I/O expander
+// public domain!
+
+// Connect pin #12 of the expander to Analog 5 (i2c clock)
+// Connect pin #13 of the expander to Analog 4 (i2c data)
+// Connect pins #15, 16 and 17 of the expander to ground (address selection)
+// Connect pin #9 of the expander to 5V (power)
+// Connect pin #10 of the expander to ground (common ground)
+// Connect pin #18 through a ~10kohm resistor to 5V (reset pin, active low)
+
+// Output #0 is on pin 21 so connect an LED or whatever from that to ground
+
+Adafruit_MCP23017 mcp;
+  
+void setup() {  
+  mcp.begin();      // use default address 0
+
+  mcp.pinMode(0, OUTPUT);
+}
+
+
+// flip the pin #0 up and down
+
+void loop() {
+  delay(100);
+
+  mcp.digitalWrite(0, HIGH);
+
+  delay(100);
+
+  mcp.digitalWrite(0, LOW);
+}