From dab18e13f61f826516b65b93753c9875b8f9baf7 Mon Sep 17 00:00:00 2001
From: Siwat Sirichai <siwat@siwatinc.com>
Date: Wed, 3 Jan 2024 03:03:10 +0700
Subject: [PATCH] enclosure fan control

---
 printer.cfg | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/printer.cfg b/printer.cfg
index 4ab8fa9..b3aee79 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -294,7 +294,7 @@ activate_gcode:
 # 	Fan Control
 #####################################################################
 
-[fan]
+[fan_generic part_cooling_fan]
 ##	Print Cooling Fan - CNC_FAN0
 pin: !PA4
 kick_start_time: 0
@@ -492,12 +492,15 @@ gcode:
 [gcode_macro M106]
 gcode:
     # P0: Part cooling fan, P3: Exhaust fan
-    {% if params.P == 0 %}
-        M106 S{ (params.S | int) }
-    {% elif params.P == 3 %}
-        SET_FAN_SPEED FAN=exhaust_fan SPEED={ (params.S | int)/255.0 }
-    {% endif %} 
-
+    # If no P parameter is given, assume Part Cooling Fan
+    {% set speed = (params.S|float / 255 if params.S is defined else 1.0) %}
+    {% set fan_id = (params.P)|int if params.P is defined else 0 %}
+    {% if fan_id == 0 %}
+        SET_FAN_SPEED FAN=part_cooling_fan SPEED={speed}
+    {% elif fan_id == 3 %}
+        SET_FAN_SPEED FAN=exhaust_fan SPEED={speed}
+    {% endif %}
+    
 #*# <---------------------- SAVE_CONFIG ---------------------->
 #*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
 #*#
@@ -512,4 +515,4 @@ gcode:
 #*#
 #*# [extruder]
 #*#
-#*# [heater_bed]
+#*# [heater_bed]
\ No newline at end of file