siwat
/
siwat-voron-cfg
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update printer.cfg

This commit is contained in:
Siwat Sirichai 2023-12-15 09:53:48 -08:00
parent c35948b4d6
commit d235dc772e
1 changed files with 41 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

50
printer.cfg
View File

@ -13,7 +13,7 @@ canbus_uuid: 0ab26b4c87c4
[printer] [printer]
kinematics: corexy kinematics: corexy
max_velocity: 500 max_velocity: 500
max_accel: 4000 #Max 4000 max_accel: 20000
max_z_velocity: 20 #Max 15 for 12V TMC Drivers, can increase for 24V max_z_velocity: 20 #Max 15 for 12V TMC Drivers, can increase for 24V
max_z_accel: 350 max_z_accel: 350
square_corner_velocity: 5.0 square_corner_velocity: 5.0
@ -49,7 +49,7 @@ cs_pin: PC13
spi_software_mosi_pin: PG6 spi_software_mosi_pin: PG6
spi_software_miso_pin: PG7 spi_software_miso_pin: PG7
spi_software_sclk_pin: PG8 spi_software_sclk_pin: PG8
run_current: 0.800 run_current: 1.000
stealthchop_threshold: 0 stealthchop_threshold: 0
# Y Stepper on Motor2 (A Motor) # Y Stepper on Motor2 (A Motor)
@ -62,8 +62,8 @@ rotation_distance: 40
endstop_pin: ^PF3 endstop_pin: ^PF3
full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper
position_min: 0 position_min: 0
position_endstop: 300 position_endstop: 355
position_max: 300 position_max: 355
homing_speed: 25 #Max 100 homing_speed: 25 #Max 100
homing_retract_dist: 5 homing_retract_dist: 5
homing_positive_dir: true homing_positive_dir: true
@ -73,7 +73,7 @@ cs_pin: PE3
spi_software_mosi_pin: PG6 spi_software_mosi_pin: PG6
spi_software_miso_pin: PG7 spi_software_miso_pin: PG7
spi_software_sclk_pin: PG8 spi_software_sclk_pin: PG8
run_current: 0.800 run_current: 1.000
stealthchop_threshold: 0 stealthchop_threshold: 0
@ -206,7 +206,12 @@ cs_pin: printhead: PB12
spi_software_sclk_pin: printhead: PB10 spi_software_sclk_pin: printhead: PB10
spi_software_mosi_pin: printhead: PB11 spi_software_mosi_pin: printhead: PB11
spi_software_miso_pin: printhead: PB2 spi_software_miso_pin: printhead: PB2
axes_map: x,y,z axes_map: x,z,y
[resonance_tester]
accel_chip: adxl345
probe_points:
175, 175, 30
##################################################################### #####################################################################
# Bed Heater # Bed Heater
@ -236,13 +241,29 @@ pid_kd: 363.769
pin: printhead: PB6 pin: printhead: PB6
x_offset: 0 x_offset: 0
y_offset: 25.0 y_offset: 25.0
z_offset: 0 #z_offset: 0
speed: 10.0 speed: 10.0
samples: 3 samples: 3
samples_result: median samples_result: median
sample_retract_dist: 5.0 sample_retract_dist: 5.0
samples_tolerance: 0.006 samples_tolerance: 0.006
samples_tolerance_retries: 3 samples_tolerance_retries: 3
activate_gcode:
{% set PROBE_TEMP = 150 %}
{% set MAX_TEMP = PROBE_TEMP + 5 %}
{% set ACTUAL_TEMP = printer.extruder.temperature %}
{% set TARGET_TEMP = printer.extruder.target %}
{% if TARGET_TEMP > PROBE_TEMP %}
{ action_respond_info('Extruder temperature target of %.1fC is too high, lowering to %.1fC' % (TARGET_TEMP, PROBE_TEMP)) }
M109 S{ PROBE_TEMP }
{% else %}
# Temperature target is already low enough, but nozzle may still be too hot.
{% if ACTUAL_TEMP > MAX_TEMP %}
{ action_respond_info('Extruder temperature %.1fC is still too high, waiting until below %.1fC' % (ACTUAL_TEMP, MAX_TEMP)) }
TEMPERATURE_WAIT SENSOR=extruder MAXIMUM={ MAX_TEMP }
{% endif %}
{% endif %}
##################################################################### #####################################################################
# Fan Control # Fan Control
@ -334,7 +355,7 @@ points:
speed: 100 speed: 100
horizontal_move_z: 10 horizontal_move_z: 10
retries: 5 retries: 5
retry_tolerance: 0.0075 retry_tolerance: 0.01
max_adjust: 10 max_adjust: 10
[board_pins] [board_pins]
@ -386,4 +407,15 @@ gcode:
G90 ; absolute positioning G90 ; absolute positioning
G0 X125 Y250 F3600 ; park nozzle at rear G0 X125 Y250 F3600 ; park nozzle at rear
BED_MESH_CLEAR BED_MESH_CLEAR
#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [input_shaper]
#*# shaper_type_x = mzv
#*# shaper_freq_x = 49.4
#*# shaper_type_y = zv
#*# shaper_freq_y = 62.0
#*#
#*# [probe]
#*# z_offset = -1.650