siwat
/
siwat-voron-cfg
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update printer.cfg

This commit is contained in:
Siwat Sirichai 2023-12-08 00:57:03 -08:00
parent c9197d72d0
commit c35948b4d6
1 changed files with 389 additions and 386 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
printer.cfg
View File

@ -89,12 +89,12 @@ enable_pin: !PE0
rotation_distance: 40 rotation_distance: 40
gear_ratio: 80:16 gear_ratio: 80:16
microsteps: 16 microsteps: 16
endstop_pin: ^PF2 endstop_pin: probe:z_virtual_endstop
## Z-position of nozzle (in mm) to z-endstop trigger point relative to print surface (Z0) ## Z-position of nozzle (in mm) to z-endstop trigger point relative to print surface (Z0)
## (+) value = endstop above Z0, (-) value = endstop below ## (+) value = endstop above Z0, (-) value = endstop below
## Increasing position_endstop brings nozzle closer to the bed ## Increasing position_endstop brings nozzle closer to the bed
## After you run Z_ENDSTOP_CALIBRATE, position_endstop will be stored at the very end of your config ## After you run Z_ENDSTOP_CALIBRATE, position_endstop will be stored at the very end of your config
position_endstop: -2 #position_endstop: -2
position_max: 340 position_max: 340
position_min: -5 position_min: -5
homing_speed: 5 homing_speed: 5
@ -166,7 +166,7 @@ stealthchop_threshold: 0
[extruder] [extruder]
step_pin: printhead: PD0 step_pin: printhead: PD0
dir_pin: !printhead: PD1 dir_pin: printhead: PD1
enable_pin: !printhead: PD2 enable_pin: !printhead: PD2
rotation_distance: 8 rotation_distance: 8
gear_ratio: 1:1 gear_ratio: 1:1
@ -174,16 +174,17 @@ microsteps: 16
full_steps_per_rotation: 200 #200 for 1.8 degree, 400 for 0.9 degree full_steps_per_rotation: 200 #200 for 1.8 degree, 400 for 0.9 degree
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.75 filament_diameter: 1.75
heater_pin: printhead: PA2 spi_speed: 4000000
heater_pin: printhead: PB13
sensor_type: MAX31865 sensor_type: MAX31865
sensor_pin: printhead: PA4 sensor_pin: printhead: PA4
spi_bus: spi1a spi_bus: spi1
rtd_nominal_r: 1000 rtd_nominal_r: 1000
rtd_reference_r: 430 rtd_reference_r: 4300
rtd_num_of_wires: 4 rtd_num_of_wires: 4
min_temp: 10 min_temp: 10
max_temp: 270 max_temp: 270
max_power: 1.0 max_power: 0.7
min_extrude_temp: 170 min_extrude_temp: 170
control = pid control = pid
pid_kp = 26.213 pid_kp = 26.213
@ -202,7 +203,9 @@ stealthchop_threshold: 0
[adxl345] [adxl345]
cs_pin: printhead: PB12 cs_pin: printhead: PB12
spi_bus: spi2 spi_software_sclk_pin: printhead: PB10
spi_software_mosi_pin: printhead: PB11
spi_software_miso_pin: printhead: PB2
axes_map: x,y,z axes_map: x,y,z
##################################################################### #####################################################################
@ -230,7 +233,7 @@ pid_kd: 363.769
## Inductive Probe ## Inductive Probe
## This probe is not used for Z height, only Quad Gantry Leveling ## This probe is not used for Z height, only Quad Gantry Leveling
## NPN and PNP proximity switch types can be set by jumper ## NPN and PNP proximity switch types can be set by jumper
pin: ^PF1 pin: printhead: PB6
x_offset: 0 x_offset: 0
y_offset: 25.0 y_offset: 25.0
z_offset: 0 z_offset: 0