siwat
/
siwat-voron-cfg
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update printer.cfg

This commit is contained in:
Siwat Sirichai 2023-12-17 01:57:57 +07:00
parent 877191e427
commit 77fd6615ab
1 changed files with 40 additions and 27 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

47
printer.cfg
View File

@ -14,7 +14,7 @@ canbus_uuid: 0ab26b4c87c4
kinematics: corexy
max_velocity: 500
max_accel: 20000
max_z_velocity: 20 #Max 15 for 12V TMC Drivers, can increase for 24V
max_z_velocity: 20
max_z_accel: 350
square_corner_velocity: 5.0
@ -186,10 +186,10 @@ min_temp: 10
max_temp: 270
max_power: 1.0
min_extrude_temp: 170
#control = pid
#pid_kp = 26.213
#pid_ki = 1.304
#pid_kd = 131.721
control = pid
pid_kp = 23.189
pid_ki = 1.562
pid_kd = 86.089
## Try to keep pressure_advance below 1.0
#pressure_advance: 0.05
## Default is 0.040, leave stock
@ -225,10 +225,10 @@ sensor_pin: PB1
max_power: 1
min_temp: 0
max_temp: 120
#control: pid
#pid_kp: 58.437
#pid_ki: 2.347
#pid_kd: 363.769
control = pid
pid_kp = 62.274
pid_ki = 3.218
pid_kd = 301.250
#####################################################################
# Probe
@ -354,7 +354,7 @@ points:
300,25
speed: 100
horizontal_move_z: 10
retries: 5
retries: 10
retry_tolerance: 0.01
max_adjust: 15
@ -392,29 +392,42 @@ gcode:
G28
QUAD_GANTRY_LEVEL
G28
G0 X175 Y175 Z30 F3600
G0 X345 Y345 Z30 F3600
[gcode_macro PARK_NOZZLE_REAR]
gcode:
G0 X345 Y345 F3600
[gcode_macro PRINT_START]
# Use PRINT_START for the slicer starting script - please customise for your slicer of choice
gcode:
M140 S{ params.BED | float } ; set bed temperture
M109 S150 ; get nozzle to probing temperture
M190 S{ params.BED | float } ; wait for bed to reach temperture
G32 ; home all axes
G1 Z20 F3000 ; move nozzle away from bed
M109 S{ params.EXTRUDER | float } ; wait for nozzle to reach temperture
SET_LED LED="hotend_rgb" RED=1 GREEN=1 BLUE=1 SYNC=0 TRANSMIT=1 ; turn on hotend LED
[gcode_macro PRINT_PURGE_LINE]
gcode:
G0 X10Y10Z0.25 F10000
G0 X200Y10Z0.25 E50 F1000
[gcode_macro PRINT_END]
# Use PRINT_END for the slicer ending script - please customise for your slicer of choice
gcode:
M400 ; wait for buffer to clear
G92 E0 ; zero the extruder
G1 E-10.0 F3600 ; retract filament
G91 ; relative positioning
G0 Z1.00 X20.0 Y20.0 F20000 ; move nozzle to remove stringing
TURN_OFF_HEATERS
TURN_OFF_HEATERS ; turn off heaters
M107 ; turn off fan
G1 Z2 F3000 ; move nozzle up 2mm
G90 ; absolute positioning
G0 X125 Y250 F3600 ; park nozzle at rear
BED_MESH_CLEAR
PARK_NOZZLE_REAR ; park nozzle
M84 ; disable motors
BED_MESH_CLEAR ; clear bed mesh
SET_LED LED="hotend_rgb" RED=1 GREEN=1 BLUE=1 SYNC=0 TRANSMIT=1 ; turn on hotend LED
#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.