From 74897f48a39519fe05c15701fd301ea6238f4ec5 Mon Sep 17 00:00:00 2001
From: Siwat Sirichai <siwat@siwatinc.com>
Date: Thu, 18 Jan 2024 21:53:46 +0700
Subject: [PATCH] Update printer.cfg

---
 printer.cfg | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/printer.cfg b/printer.cfg
index 710ca16..ab4be61 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -37,7 +37,7 @@ step_pin: PE6
 dir_pin: PE5
 enable_pin: !PC14
 microsteps: 16
-rotation_distance: 40
+rotation_distance: 40.1209
 full_steps_per_rotation:400  #set to 400 for 0.9 degree stepper
 endstop_pin: ^PF4
 position_min: 0
@@ -61,7 +61,7 @@ step_pin: PE2
 dir_pin: PE1
 enable_pin: !PE4
 microsteps: 16
-rotation_distance: 40
+rotation_distance: 40.3964
 endstop_pin: ^PF3
 full_steps_per_rotation:400  #set to 400 for 0.9 degree stepper
 position_min: 0
@@ -89,7 +89,7 @@ stealthchop_threshold: 0
 step_pin: PB8
 dir_pin: PB7
 enable_pin: !PE0
-rotation_distance: 40
+rotation_distance: 41.3288
 gear_ratio: 80:16
 microsteps: 16
 endstop_pin: probe:z_virtual_endstop
@@ -575,7 +575,7 @@ auto_cancel_variation: 0.1
 #*# shaper_freq_y = 59.0
 #*#
 #*# [probe]
-#*# z_offset = -1.655
+#*# z_offset = -1.885
 #*#
 #*# [extruder]
 #*#
@@ -584,11 +584,11 @@ auto_cancel_variation: 0.1
 #*# [bed_mesh default]
 #*# version = 1
 #*# points =
-#*# 	  0.053095, 0.170595, 0.133095, 0.143095, 0.065595
-#*# 	  0.053095, 0.080595, 0.115595, 0.108095, 0.088095
-#*# 	  0.000595, 0.068095, 0.050595, 0.145595, 0.043095
-#*# 	  0.025595, 0.058095, 0.140595, 0.060595, 0.063095
-#*# 	  0.148095, 0.185595, 0.223095, 0.175595, 0.203095
+#*# 	  -0.234754, -0.144347, -0.175344, -0.165011, -0.214089
+#*# 	  -0.283832, 0.033883, -0.149513, -0.190842, -0.221839
+#*# 	  -0.276083, -0.252835, -0.239920, -0.177927, -0.232171
+#*# 	  -0.281249, -0.268333, -0.185676, -0.214089, -0.229588
+#*# 	  -0.177927, -0.134015, -0.157262, -0.141764, -0.139181
 #*# x_count = 5
 #*# y_count = 5
 #*# mesh_x_pps = 2