From 5b9fd4bfca3f569b4f5751b1d4659ad0715772fd Mon Sep 17 00:00:00 2001
From: Siwat Sirichai <siwat@siwatinc.com>
Date: Thu, 4 Jan 2024 10:15:11 -0800
Subject: [PATCH] Update printer.cfg

---
 printer.cfg | 35 +++++++++++++++++++++++++++--------
 1 file changed, 27 insertions(+), 8 deletions(-)

diff --git a/printer.cfg b/printer.cfg
index 0185b04..ed8fc7e 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -227,7 +227,7 @@ insert_gcode:
 
 [filament_motion_sensor encoder_sensor]
 switch_pin: ^PC15
-detection_length: 2.88 # accuracy of motion sensor 2.88mm
+detection_length: 15
 extruder: extruder
 pause_on_runout: True
 runout_gcode:
@@ -290,6 +290,13 @@ activate_gcode:
         {% endif %}
     {% endif %}
 
+#####################################################################
+#   Enclosure Temperature Control
+#####################################################################
+[temperature_sensor chamber]
+sensor_type: Generic 3950
+sensor_pin: PB0
+
 #####################################################################
 # 	Fan Control
 #####################################################################
@@ -322,12 +329,14 @@ kick_start_time: 5.0
 [multi_pin controller_fans]
 pins: PF7,PF9
 
-[heater_fan controller_fan]
+[controller_fan controller_fan]
 ##	Controller fan - CNC_FAN2
 pin: multi_pin:controller_fans
 kick_start_time: 0.5
+idle_speed: 0.5
 heater: heater_bed
-heater_temp: 45.0
+idle_timeout: 120
+
 
 
 #####################################################################
@@ -341,8 +350,8 @@ color_order: GRB
 
 [neopixel hotend_rgb]
 pin: printhead: PD3
-chain_count: 3
-color_order: GRB
+chain_count: 6
+color_order: GRB,RBG,GRB,RGB,RGB,RGB
 
 #####################################################################
 # 	Homing and Gantry Adjustment Routines
@@ -436,6 +445,7 @@ gcode:
 
 [gcode_macro PRINT_START]
 gcode:
+    SET_LED LED="caselight" RED=0.898 GREEN=1 BLUE=0 SYNC=0 TRANSMIT=1
     M140 S{ params.BED | float }                                    ; set bed temperature
 
     {% set PROBE_TEMP = 150 %}
@@ -472,9 +482,9 @@ gcode:
     G1 Z2 F3000                                                     ; move nozzle up 2mm
     G90                                                             ; absolute positioning
     PARK_NOZZLE_REAR                                                ; park nozzle
-    M84                                                             ; disable motors
+    #M84                                                             ; disable motors (optional)
     SET_LED LED="hotend_rgb" RED=0 GREEN=0 BLUE=0 SYNC=0 TRANSMIT=1 ; turn off hotend LED
-    SET_LED LED="caselight" RED=0 GREEN=0 BLUE=0 SYNC=0 TRANSMIT=1   ; turn off case light
+    SET_LED LED="caselight" RED=0 GREEN=0 BLUE=0 SYNC=0 TRANSMIT=1
 
 [gcode_macro LOAD_FILAMENT]
 gcode:
@@ -500,7 +510,16 @@ gcode:
     {% elif fan_id == 3 %}
         SET_FAN_SPEED FAN=exhaust_fan SPEED={speed}
     {% endif %}
-    
+
+###################################################################
+#     Palette 2
+###################################################################
+[palette2]
+serial: /dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_DM02HVOW-if00-port0
+feedrate_splice: 0.3
+feedrate_normal: 1.0
+auto_load_speed: 2
+auto_cancel_variation: 0.1
 #*# <---------------------- SAVE_CONFIG ---------------------->
 #*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
 #*#