siwat
/
siwat-voron-cfg
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update printer.cfg

This commit is contained in:
Siwat Sirichai 2023-09-25 00:11:57 +07:00
parent e400863fa9
commit 4799ab2e71
1 changed files with 5 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
printer.cfg
View File

@ -72,12 +72,7 @@ enable_pin: !PE0
rotation_distance: 40
gear_ratio: 80:16
microsteps: 16
endstop_pin: ^PF2
## Z-position of nozzle (in mm) to z-endstop trigger point relative to print surface (Z0)
## (+) value = endstop above Z0, (-) value = endstop below
## Increasing position_endstop brings nozzle closer to the bed
## After you run Z_ENDSTOP_CALIBRATE, position_endstop will be stored at the very end of your config
position_endstop: -2
endstop_pin: probe:z_virtual_endstop
position_max: 340
position_min: -5
homing_speed: 5
@ -179,13 +174,12 @@ pid_kd: 363.769
#####################################################################
[probe]
## Inductive Probe
## This probe is not used for Z height, only Quad Gantry Leveling
## NPN and PNP proximity switch types can be set by jumper
## TAP Probe
## This probe is used for Z height and Quad Gantry Leveling
pin: ^PF1
x_offset: 0
y_offset: 25.0
z_offset: 0
y_offset: 0
z_offset: -2
speed: 10.0
samples: 3
samples_result: median