diff --git a/printer.cfg b/printer.cfg
index 6c093fc..d2bffe1 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -487,11 +487,11 @@ gcode:
     {% set ACTUAL_TEMP = printer.extruder.temperature %}
     
     {% if ACTUAL_TEMP > PROBE_TEMP %}
-    M106 S255
-    M109 S{ PROBE_TEMP }
-    M106 S0
+        M106 S255
+        M109 S{ PROBE_TEMP }
+        M106 S0
     {% else %}
-    M109 S{ PROBE_TEMP }
+        M109 S{ PROBE_TEMP }
     {% endif %}
                                                           ; get nozzle to probing temperture
     M190 S{ params.BED | float }                                    ; wait for bed to reach temperture
@@ -501,7 +501,15 @@ gcode:
     {% if params.QGL is defined and params.QGL == "NO" %}
         G28
     {% else %}
-        G32
+        ; Is QGL applied already?
+        {% if printer.quad_gantry_level.applied %}
+            ; QGL is applied, so just home the axis
+            G28
+            PARK_NOZZLE_REAR
+        {% else %}
+            ; QGL is not applied, so home the axis and apply QGL and calibrate the mesh
+            G32
+        {% endif %}
     {% endif %}
     G1 Z20 F3000                                                    ; move nozzle away from bed
     M109 S{ params.EXTRUDER | float }                               ; wait for nozzle to reach temperture