815 lines
21 KiB
C++
815 lines
21 KiB
C++
//xyzcal.cpp - xyz calibration with image processing
|
|
|
|
#include "Configuration_prusa.h"
|
|
#ifdef NEW_XYZCAL
|
|
|
|
#include "xyzcal.h"
|
|
#include <avr/wdt.h>
|
|
#include "stepper.h"
|
|
#include "temperature.h"
|
|
#include "sm4.h"
|
|
|
|
|
|
#define XYZCAL_PINDA_HYST_MIN 20 //50um
|
|
#define XYZCAL_PINDA_HYST_MAX 100 //250um
|
|
#define XYZCAL_PINDA_HYST_DIF 5 //12.5um
|
|
|
|
#define ENABLE_FANCHECK_INTERRUPT() EIMSK |= (1<<7)
|
|
#define DISABLE_FANCHECK_INTERRUPT() EIMSK &= ~(1<<7)
|
|
|
|
#define _PINDA ((READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING)?1:0)
|
|
|
|
#define DBG(args...) printf_P(args)
|
|
//#define DBG(args...)
|
|
#ifndef _n
|
|
#define _n PSTR
|
|
#endif //_n
|
|
|
|
#define _X ((int16_t)count_position[X_AXIS])
|
|
#define _Y ((int16_t)count_position[Y_AXIS])
|
|
#define _Z ((int16_t)count_position[Z_AXIS])
|
|
#define _E ((int16_t)count_position[E_AXIS])
|
|
|
|
#define _PI 3.14159265F
|
|
|
|
uint8_t check_pinda_0();
|
|
uint8_t check_pinda_1();
|
|
void xyzcal_update_pos(uint16_t dx, uint16_t dy, uint16_t dz, uint16_t de);
|
|
uint16_t xyzcal_calc_delay(uint16_t nd, uint16_t dd);
|
|
|
|
|
|
void xyzcal_meassure_enter(void)
|
|
{
|
|
DBG(_n("xyzcal_meassure_enter\n"));
|
|
disable_heater();
|
|
DISABLE_TEMPERATURE_INTERRUPT();
|
|
#if (defined(FANCHECK) && defined(TACH_1) && (TACH_1 >-1))
|
|
DISABLE_FANCHECK_INTERRUPT();
|
|
#endif //(defined(FANCHECK) && defined(TACH_1) && (TACH_1 >-1))
|
|
DISABLE_STEPPER_DRIVER_INTERRUPT();
|
|
#ifdef WATCHDOG
|
|
wdt_disable();
|
|
#endif //WATCHDOG
|
|
sm4_stop_cb = 0;
|
|
sm4_update_pos_cb = xyzcal_update_pos;
|
|
sm4_calc_delay_cb = xyzcal_calc_delay;
|
|
}
|
|
|
|
void xyzcal_meassure_leave(void)
|
|
{
|
|
DBG(_n("xyzcal_meassure_leave\n"));
|
|
planner_abort_hard();
|
|
ENABLE_TEMPERATURE_INTERRUPT();
|
|
#if (defined(FANCHECK) && defined(TACH_1) && (TACH_1 >-1))
|
|
ENABLE_FANCHECK_INTERRUPT();
|
|
#endif //(defined(FANCHECK) && defined(TACH_1) && (TACH_1 >-1))
|
|
ENABLE_STEPPER_DRIVER_INTERRUPT();
|
|
#ifdef WATCHDOG
|
|
wdt_enable(WDTO_4S);
|
|
#endif //WATCHDOG
|
|
sm4_stop_cb = 0;
|
|
sm4_update_pos_cb = 0;
|
|
sm4_calc_delay_cb = 0;
|
|
}
|
|
|
|
|
|
uint8_t check_pinda_0()
|
|
{
|
|
return _PINDA?0:1;
|
|
}
|
|
|
|
uint8_t check_pinda_1()
|
|
{
|
|
return _PINDA?1:0;
|
|
}
|
|
|
|
uint8_t xyzcal_dm = 0;
|
|
|
|
void xyzcal_update_pos(uint16_t dx, uint16_t dy, uint16_t dz, uint16_t)
|
|
{
|
|
// DBG(_n("xyzcal_update_pos dx=%d dy=%d dz=%d dir=%02x\n"), dx, dy, dz, xyzcal_dm);
|
|
if (xyzcal_dm&1) count_position[0] -= dx; else count_position[0] += dx;
|
|
if (xyzcal_dm&2) count_position[1] -= dy; else count_position[1] += dy;
|
|
if (xyzcal_dm&4) count_position[2] -= dz; else count_position[2] += dz;
|
|
// DBG(_n(" after xyzcal_update_pos x=%ld y=%ld z=%ld\n"), count_position[0], count_position[1], count_position[2]);
|
|
}
|
|
|
|
uint16_t xyzcal_sm4_delay = 0;
|
|
|
|
//#define SM4_ACCEL_TEST
|
|
#ifdef SM4_ACCEL_TEST
|
|
uint16_t xyzcal_sm4_v0 = 2000;
|
|
uint16_t xyzcal_sm4_vm = 45000;
|
|
uint16_t xyzcal_sm4_v = xyzcal_sm4_v0;
|
|
uint16_t xyzcal_sm4_ac = 2000;
|
|
uint16_t xyzcal_sm4_ac2 = (uint32_t)xyzcal_sm4_ac * 1024 / 10000;
|
|
//float xyzcal_sm4_vm = 10000;
|
|
#endif //SM4_ACCEL_TEST
|
|
|
|
#ifdef SM4_ACCEL_TEST
|
|
uint16_t xyzcal_calc_delay(uint16_t nd, uint16_t dd)
|
|
{
|
|
uint16_t del_us = 0;
|
|
if (xyzcal_sm4_v & 0xf000) //>=4096
|
|
{
|
|
del_us = (uint16_t)62500 / (uint16_t)(xyzcal_sm4_v >> 4);
|
|
xyzcal_sm4_v += (xyzcal_sm4_ac2 * del_us + 512) >> 10;
|
|
if (xyzcal_sm4_v > xyzcal_sm4_vm) xyzcal_sm4_v = xyzcal_sm4_vm;
|
|
if (del_us > 25) return del_us - 25;
|
|
}
|
|
else
|
|
{
|
|
del_us = (uint32_t)1000000 / xyzcal_sm4_v;
|
|
xyzcal_sm4_v += ((uint32_t)xyzcal_sm4_ac2 * del_us + 512) >> 10;
|
|
if (xyzcal_sm4_v > xyzcal_sm4_vm) xyzcal_sm4_v = xyzcal_sm4_vm;
|
|
if (del_us > 50) return del_us - 50;
|
|
}
|
|
|
|
// uint16_t del_us = (uint16_t)(((float)1000000 / xyzcal_sm4_v) + 0.5);
|
|
// uint16_t del_us = (uint32_t)1000000 / xyzcal_sm4_v;
|
|
// uint16_t del_us = 100;
|
|
// uint16_t del_us = (uint16_t)10000 / xyzcal_sm4_v;
|
|
// v += (ac * del_us + 500) / 1000;
|
|
// xyzcal_sm4_v += (xyzcal_sm4_ac * del_us) / 1000;
|
|
// return xyzcal_sm4_delay;
|
|
// DBG(_n("xyzcal_calc_delay nd=%d dd=%d v=%d del_us=%d\n"), nd, dd, xyzcal_sm4_v, del_us);
|
|
return 0;
|
|
}
|
|
#else //SM4_ACCEL_TEST
|
|
uint16_t xyzcal_calc_delay(uint16_t, uint16_t)
|
|
{
|
|
return xyzcal_sm4_delay;
|
|
}
|
|
#endif //SM4_ACCEL_TEST
|
|
|
|
bool xyzcal_lineXYZ_to(int16_t x, int16_t y, int16_t z, uint16_t delay_us, int8_t check_pinda)
|
|
{
|
|
// DBG(_n("xyzcal_lineXYZ_to x=%d y=%d z=%d check=%d\n"), x, y, z, check_pinda);
|
|
x -= (int16_t)count_position[0];
|
|
y -= (int16_t)count_position[1];
|
|
z -= (int16_t)count_position[2];
|
|
xyzcal_dm = ((x<0)?1:0) | ((y<0)?2:0) | ((z<0)?4:0);
|
|
sm4_set_dir_bits(xyzcal_dm);
|
|
sm4_stop_cb = check_pinda?((check_pinda<0)?check_pinda_0:check_pinda_1):0;
|
|
xyzcal_sm4_delay = delay_us;
|
|
// uint32_t u = _micros();
|
|
bool ret = sm4_line_xyze_ui(abs(x), abs(y), abs(z), 0)?true:false;
|
|
// u = _micros() - u;
|
|
return ret;
|
|
}
|
|
|
|
bool xyzcal_spiral2(int16_t cx, int16_t cy, int16_t z0, int16_t dz, int16_t radius, int16_t rotation, uint16_t delay_us, int8_t check_pinda, uint16_t* pad)
|
|
{
|
|
bool ret = false;
|
|
float r = 0; //radius
|
|
uint8_t n = 0; //point number
|
|
uint16_t ad = 0; //angle [deg]
|
|
float ar; //angle [rad]
|
|
uint8_t dad = 0; //delta angle [deg]
|
|
uint8_t dad_min = 4; //delta angle min [deg]
|
|
uint8_t dad_max = 16; //delta angle max [deg]
|
|
uint8_t k = 720 / (dad_max - dad_min); //delta calculation constant
|
|
ad = 0;
|
|
if (pad) ad = *pad % 720;
|
|
DBG(_n("xyzcal_spiral2 cx=%d cy=%d z0=%d dz=%d radius=%d ad=%d\n"), cx, cy, z0, dz, radius, ad);
|
|
for (; ad < 720; ad++)
|
|
{
|
|
if (radius > 0)
|
|
{
|
|
dad = dad_max - (ad / k);
|
|
r = (float)(((uint32_t)ad) * radius) / 720;
|
|
}
|
|
else
|
|
{
|
|
dad = dad_max - ((719 - ad) / k);
|
|
r = (float)(((uint32_t)(719 - ad)) * (-radius)) / 720;
|
|
}
|
|
ar = (ad + rotation)* (float)_PI / 180;
|
|
float _cos = cos(ar);
|
|
float _sin = sin(ar);
|
|
int x = (int)(cx + (_cos * r));
|
|
int y = (int)(cy + (_sin * r));
|
|
int z = (int)(z0 - ((float)((int32_t)dz * ad) / 720));
|
|
if (xyzcal_lineXYZ_to(x, y, z, delay_us, check_pinda))
|
|
{
|
|
ad += dad + 1;
|
|
ret = true;
|
|
break;
|
|
}
|
|
n++;
|
|
ad += dad;
|
|
}
|
|
if (pad) *pad = ad;
|
|
return ret;
|
|
}
|
|
|
|
bool xyzcal_spiral8(int16_t cx, int16_t cy, int16_t z0, int16_t dz, int16_t radius, uint16_t delay_us, int8_t check_pinda, uint16_t* pad)
|
|
{
|
|
bool ret = false;
|
|
uint16_t ad = 0;
|
|
if (pad) ad = *pad;
|
|
DBG(_n("xyzcal_spiral8 cx=%d cy=%d z0=%d dz=%d radius=%d ad=%d\n"), cx, cy, z0, dz, radius, ad);
|
|
if (!ret && (ad < 720))
|
|
if ((ret = xyzcal_spiral2(cx, cy, z0 - 0*dz, dz, radius, 0, delay_us, check_pinda, &ad)) != 0)
|
|
ad += 0;
|
|
if (!ret && (ad < 1440))
|
|
if ((ret = xyzcal_spiral2(cx, cy, z0 - 1*dz, dz, -radius, 0, delay_us, check_pinda, &ad)) != 0)
|
|
ad += 720;
|
|
if (!ret && (ad < 2160))
|
|
if ((ret = xyzcal_spiral2(cx, cy, z0 - 2*dz, dz, radius, 180, delay_us, check_pinda, &ad)) != 0)
|
|
ad += 1440;
|
|
if (!ret && (ad < 2880))
|
|
if ((ret = xyzcal_spiral2(cx, cy, z0 - 3*dz, dz, -radius, 180, delay_us, check_pinda, &ad)) != 0)
|
|
ad += 2160;
|
|
if (pad) *pad = ad;
|
|
return ret;
|
|
}
|
|
|
|
#ifdef XYZCAL_MEASSURE_PINDA_HYSTEREZIS
|
|
int8_t xyzcal_meassure_pinda_hysterezis(int16_t min_z, int16_t max_z, uint16_t delay_us, uint8_t samples)
|
|
{
|
|
DBG(_n("xyzcal_meassure_pinda_hysterezis\n"));
|
|
int8_t ret = -1; // PINDA signal error
|
|
int16_t z = _Z;
|
|
int16_t sum_up = 0;
|
|
int16_t sum_dn = 0;
|
|
int16_t up;
|
|
int16_t dn;
|
|
uint8_t sample;
|
|
xyzcal_lineXYZ_to(_X, _Y, min_z, delay_us, 1);
|
|
xyzcal_lineXYZ_to(_X, _Y, max_z, delay_us, -1);
|
|
if (!_PINDA)
|
|
{
|
|
for (sample = 0; sample < samples; sample++)
|
|
{
|
|
dn = _Z;
|
|
if (!xyzcal_lineXYZ_to(_X, _Y, min_z, delay_us, 1)) break;
|
|
dn = dn - _Z;
|
|
up = _Z;
|
|
if (!xyzcal_lineXYZ_to(_X, _Y, max_z, delay_us, -1)) break;
|
|
up = _Z - up;
|
|
DBG(_n("%d. up=%d dn=%d\n"), sample, up, dn);
|
|
sum_up += up;
|
|
sum_dn += dn;
|
|
if (abs(up - dn) > XYZCAL_PINDA_HYST_DIF)
|
|
{
|
|
ret = -2; // difference between up-dn to high
|
|
break;
|
|
}
|
|
}
|
|
if (sample == samples)
|
|
{
|
|
up = sum_up / samples;
|
|
dn = sum_dn / samples;
|
|
uint16_t hyst = (up + dn) / 2;
|
|
if (abs(up - dn) > XYZCAL_PINDA_HYST_DIF)
|
|
ret = -2; // difference between up-dn to high
|
|
else if ((hyst < XYZCAL_PINDA_HYST_MIN) || (hyst > XYZCAL_PINDA_HYST_MAX))
|
|
ret = -3; // hysterezis out of range
|
|
else
|
|
ret = hyst;
|
|
}
|
|
}
|
|
xyzcal_lineXYZ_to(_X, _Y, z, delay_us, 0);
|
|
return ret;
|
|
}
|
|
#endif //XYZCAL_MEASSURE_PINDA_HYSTEREZIS
|
|
|
|
|
|
void xyzcal_scan_pixels_32x32(int16_t cx, int16_t cy, int16_t min_z, int16_t max_z, uint16_t delay_us, uint8_t* pixels)
|
|
{
|
|
DBG(_n("xyzcal_scan_pixels_32x32 cx=%d cy=%d min_z=%d max_z=%d\n"), cx, cy, min_z, max_z);
|
|
// xyzcal_lineXYZ_to(cx - 1024, cy - 1024, max_z, 2*delay_us, 0);
|
|
// xyzcal_lineXYZ_to(cx, cy, max_z, delay_us, 0);
|
|
int16_t z = (int16_t)count_position[2];
|
|
xyzcal_lineXYZ_to(cx, cy, z, 2*delay_us, 0);
|
|
for (uint8_t r = 0; r < 32; r++)
|
|
{
|
|
// int8_t _pinda = _PINDA;
|
|
xyzcal_lineXYZ_to((r&1)?(cx+1024):(cx-1024), cy - 1024 + r*64, z, 2*delay_us, 0);
|
|
xyzcal_lineXYZ_to(_X, _Y, min_z, delay_us, 1);
|
|
xyzcal_lineXYZ_to(_X, _Y, max_z, delay_us, -1);
|
|
z = (int16_t)count_position[2];
|
|
sm4_set_dir(X_AXIS, (r&1)?1:0);
|
|
for (uint8_t c = 0; c < 32; c++)
|
|
{
|
|
uint16_t sum = 0;
|
|
int16_t z_sum = 0;
|
|
for (uint8_t i = 0; i < 64; i++)
|
|
{
|
|
int8_t pinda = _PINDA;
|
|
int16_t pix = z - min_z;
|
|
pix += (pinda)?23:-24;
|
|
if (pix < 0) pix = 0;
|
|
if (pix > 255) pix = 255;
|
|
sum += pix;
|
|
z_sum += z;
|
|
// if (_pinda != pinda)
|
|
// {
|
|
// if (pinda)
|
|
// DBG(_n("!1 x=%d z=%d\n"), c*64+i, z+23);
|
|
// else
|
|
// DBG(_n("!0 x=%d z=%d\n"), c*64+i, z-24);
|
|
// }
|
|
sm4_set_dir(Z_AXIS, !pinda);
|
|
if (!pinda)
|
|
{
|
|
if (z > min_z)
|
|
{
|
|
sm4_do_step(Z_AXIS_MASK);
|
|
z--;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if (z < max_z)
|
|
{
|
|
sm4_do_step(Z_AXIS_MASK);
|
|
z++;
|
|
}
|
|
}
|
|
sm4_do_step(X_AXIS_MASK);
|
|
delayMicroseconds(600);
|
|
// _pinda = pinda;
|
|
}
|
|
sum >>= 6; //div 64
|
|
if (z_sum < 0)
|
|
{
|
|
z_sum = -z_sum;
|
|
z_sum >>= 6; //div 64
|
|
z_sum = -z_sum;
|
|
}
|
|
else
|
|
z_sum >>= 6; //div 64
|
|
if (pixels) pixels[((uint16_t)r<<5) + ((r&1)?(31-c):c)] = sum;
|
|
// DBG(_n("c=%d r=%d l=%d z=%d\n"), c, r, sum, z_sum);
|
|
count_position[0] += (r&1)?-64:64;
|
|
count_position[2] = z;
|
|
}
|
|
if (pixels)
|
|
for (uint8_t c = 0; c < 32; c++)
|
|
DBG(_n("%02x"), pixels[((uint16_t)r<<5) + c]);
|
|
DBG(_n("\n"));
|
|
}
|
|
// xyzcal_lineXYZ_to(cx, cy, z, 2*delay_us, 0);
|
|
}
|
|
|
|
void xyzcal_histo_pixels_32x32(uint8_t* pixels, uint16_t* histo)
|
|
{
|
|
for (uint8_t l = 0; l < 16; l++)
|
|
histo[l] = 0;
|
|
for (uint8_t r = 0; r < 32; r++)
|
|
for (uint8_t c = 0; c < 32; c++)
|
|
{
|
|
uint8_t pix = pixels[((uint16_t)r<<5) + c];
|
|
histo[pix >> 4]++;
|
|
}
|
|
for (uint8_t l = 0; l < 16; l++)
|
|
DBG(_n(" %2d %d\n"), l, histo[l]);
|
|
}
|
|
|
|
void xyzcal_adjust_pixels(uint8_t* pixels, uint16_t* histo)
|
|
{
|
|
uint8_t l;
|
|
uint16_t max_c = histo[1];
|
|
uint8_t max_l = 1;
|
|
for (l = 1; l < 16; l++)
|
|
{
|
|
uint16_t c = histo[l];
|
|
if (c > max_c)
|
|
{
|
|
max_c = c;
|
|
max_l = l;
|
|
}
|
|
}
|
|
DBG(_n("max_c=%2d max_l=%d\n"), max_c, max_l);
|
|
for (l = 14; l > 8; l--)
|
|
if (histo[l] >= 10)
|
|
break;
|
|
uint8_t pix_min = 0;
|
|
uint8_t pix_max = l << 4;
|
|
if (histo[0] < (32*32 - 144))
|
|
{
|
|
pix_min = (max_l << 4) / 2;
|
|
}
|
|
uint8_t pix_dif = pix_max - pix_min;
|
|
DBG(_n(" min=%d max=%d dif=%d\n"), pix_min, pix_max, pix_dif);
|
|
for (int16_t i = 0; i < 32*32; i++)
|
|
{
|
|
uint16_t pix = pixels[i];
|
|
if (pix > pix_min) pix -= pix_min;
|
|
else pix = 0;
|
|
pix <<= 8;
|
|
pix /= pix_dif;
|
|
// if (pix < 0) pix = 0;
|
|
if (pix > 255) pix = 255;
|
|
pixels[i] = (uint8_t)pix;
|
|
}
|
|
for (uint8_t r = 0; r < 32; r++)
|
|
{
|
|
for (uint8_t c = 0; c < 32; c++)
|
|
DBG(_n("%02x"), pixels[((uint16_t)r<<5) + c]);
|
|
DBG(_n("\n"));
|
|
}
|
|
}
|
|
|
|
/*
|
|
void xyzcal_draw_pattern_12x12_in_32x32(uint8_t* pattern, uint32_t* pixels, int w, int h, uint8_t x, uint8_t y, uint32_t and, uint32_t or)
|
|
{
|
|
for (int i = 0; i < 8; i++)
|
|
for (int j = 0; j < 8; j++)
|
|
{
|
|
int idx = (x + j) + w * (y + i);
|
|
if (pattern[i] & (1 << j))
|
|
{
|
|
pixels[idx] &= and;
|
|
pixels[idx] |= or;
|
|
}
|
|
}
|
|
}
|
|
*/
|
|
|
|
int16_t xyzcal_match_pattern_12x12_in_32x32(uint16_t* pattern, uint8_t* pixels, uint8_t c, uint8_t r)
|
|
{
|
|
uint8_t thr = 16;
|
|
int16_t match = 0;
|
|
for (uint8_t i = 0; i < 12; i++)
|
|
for (uint8_t j = 0; j < 12; j++)
|
|
{
|
|
if (((i == 0) || (i == 11)) && ((j < 2) || (j >= 10))) continue; //skip corners
|
|
if (((j == 0) || (j == 11)) && ((i < 2) || (i >= 10))) continue;
|
|
uint16_t idx = (c + j) + 32 * (r + i);
|
|
uint8_t val = pixels[idx];
|
|
if (pattern[i] & (1 << j))
|
|
{
|
|
if (val > thr) match ++;
|
|
else match --;
|
|
}
|
|
else
|
|
{
|
|
if (val <= thr) match ++;
|
|
else match --;
|
|
}
|
|
}
|
|
return match;
|
|
}
|
|
|
|
int16_t xyzcal_find_pattern_12x12_in_32x32(uint8_t* pixels, uint16_t* pattern, uint8_t* pc, uint8_t* pr)
|
|
{
|
|
uint8_t max_c = 0;
|
|
uint8_t max_r = 0;
|
|
int16_t max_match = 0;
|
|
for (uint8_t r = 0; r < (32 - 12); r++)
|
|
for (uint8_t c = 0; c < (32 - 12); c++)
|
|
{
|
|
int16_t match = xyzcal_match_pattern_12x12_in_32x32(pattern, pixels, c, r);
|
|
if (max_match < match)
|
|
{
|
|
max_c = c;
|
|
max_r = r;
|
|
max_match = match;
|
|
}
|
|
}
|
|
DBG(_n("max_c=%d max_r=%d max_match=%d\n"), max_c, max_r, max_match);
|
|
if (pc) *pc = max_c;
|
|
if (pr) *pr = max_r;
|
|
return max_match;
|
|
}
|
|
|
|
#define MAX_DIAMETR 600
|
|
#define XYZCAL_FIND_CENTER_DIAGONAL
|
|
|
|
int8_t xyzcal_find_point_center2(uint16_t delay_us)
|
|
{
|
|
printf_P(PSTR("xyzcal_find_point_center2\n"));
|
|
int16_t x0 = _X;
|
|
int16_t y0 = _Y;
|
|
int16_t z0 = _Z;
|
|
printf_P(PSTR(" x0=%d\n"), x0);
|
|
printf_P(PSTR(" y0=%d\n"), y0);
|
|
printf_P(PSTR(" z0=%d\n"), z0);
|
|
|
|
xyzcal_lineXYZ_to(_X, _Y, z0 + 400, 500, -1);
|
|
xyzcal_lineXYZ_to(_X, _Y, z0 - 400, 500, 1);
|
|
xyzcal_lineXYZ_to(_X, _Y, z0 + 400, 500, -1);
|
|
xyzcal_lineXYZ_to(_X, _Y, z0 - 400, 500, 1);
|
|
|
|
z0 = _Z - 20;
|
|
xyzcal_lineXYZ_to(_X, _Y, z0, 500, 0);
|
|
|
|
// xyzcal_lineXYZ_to(x0, y0, z0 - 100, 500, 1);
|
|
// z0 = _Z;
|
|
// printf_P(PSTR(" z0=%d\n"), z0);
|
|
// xyzcal_lineXYZ_to(x0, y0, z0 + 100, 500, -1);
|
|
// z0 += _Z;
|
|
// z0 /= 2;
|
|
printf_P(PSTR(" z0=%d\n"), z0);
|
|
// xyzcal_lineXYZ_to(x0, y0, z0 - 100, 500, 1);
|
|
// z0 = _Z - 10;
|
|
|
|
int8_t ret = 1;
|
|
|
|
#ifdef XYZCAL_FIND_CENTER_DIAGONAL
|
|
int32_t xc = 0;
|
|
int32_t yc = 0;
|
|
int16_t ad = 45;
|
|
for (; ad < 360; ad += 90)
|
|
{
|
|
float ar = (float)ad * _PI / 180;
|
|
int16_t x = x0 + MAX_DIAMETR * cos(ar);
|
|
int16_t y = y0 + MAX_DIAMETR * sin(ar);
|
|
if (!xyzcal_lineXYZ_to(x, y, z0, delay_us, -1))
|
|
{
|
|
printf_P(PSTR("ERROR ad=%d\n"), ad);
|
|
ret = 0;
|
|
break;
|
|
}
|
|
xc += _X;
|
|
yc += _Y;
|
|
xyzcal_lineXYZ_to(x0, y0, z0, delay_us, 0);
|
|
}
|
|
if (ret)
|
|
{
|
|
printf_P(PSTR("OK\n"), ad);
|
|
x0 = xc / 4;
|
|
y0 = yc / 4;
|
|
printf_P(PSTR(" x0=%d\n"), x0);
|
|
printf_P(PSTR(" y0=%d\n"), y0);
|
|
}
|
|
|
|
#else //XYZCAL_FIND_CENTER_DIAGONAL
|
|
xyzcal_lineXYZ_to(x0 - MAX_DIAMETR, y0, z0, delay_us, -1);
|
|
int16_t dx1 = x0 - _X;
|
|
if (dx1 >= MAX_DIAMETR)
|
|
{
|
|
printf_P(PSTR("!!! dx1 = %d\n"), dx1);
|
|
return 0;
|
|
}
|
|
xyzcal_lineXYZ_to(x0, y0, z0, delay_us, 0);
|
|
xyzcal_lineXYZ_to(x0 + MAX_DIAMETR, y0, z0, delay_us, -1);
|
|
int16_t dx2 = _X - x0;
|
|
if (dx2 >= MAX_DIAMETR)
|
|
{
|
|
printf_P(PSTR("!!! dx2 = %d\n"), dx2);
|
|
return 0;
|
|
}
|
|
xyzcal_lineXYZ_to(x0, y0, z0, delay_us, 0);
|
|
xyzcal_lineXYZ_to(x0 , y0 - MAX_DIAMETR, z0, delay_us, -1);
|
|
int16_t dy1 = y0 - _Y;
|
|
if (dy1 >= MAX_DIAMETR)
|
|
{
|
|
printf_P(PSTR("!!! dy1 = %d\n"), dy1);
|
|
return 0;
|
|
}
|
|
xyzcal_lineXYZ_to(x0, y0, z0, delay_us, 0);
|
|
xyzcal_lineXYZ_to(x0, y0 + MAX_DIAMETR, z0, delay_us, -1);
|
|
int16_t dy2 = _Y - y0;
|
|
if (dy2 >= MAX_DIAMETR)
|
|
{
|
|
printf_P(PSTR("!!! dy2 = %d\n"), dy2);
|
|
return 0;
|
|
}
|
|
printf_P(PSTR("dx1=%d\n"), dx1);
|
|
printf_P(PSTR("dx2=%d\n"), dx2);
|
|
printf_P(PSTR("dy1=%d\n"), dy1);
|
|
printf_P(PSTR("dy2=%d\n"), dy2);
|
|
|
|
x0 += (dx2 - dx1) / 2;
|
|
y0 += (dy2 - dy1) / 2;
|
|
|
|
printf_P(PSTR(" x0=%d\n"), x0);
|
|
printf_P(PSTR(" y0=%d\n"), y0);
|
|
|
|
#endif //XYZCAL_FIND_CENTER_DIAGONAL
|
|
|
|
xyzcal_lineXYZ_to(x0, y0, z0, delay_us, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef XYZCAL_FIND_POINT_CENTER
|
|
int8_t xyzcal_find_point_center(int16_t x0, int16_t y0, int16_t z0, int16_t min_z, int16_t max_z, uint16_t delay_us, uint8_t turns)
|
|
{
|
|
uint8_t n;
|
|
uint16_t ad;
|
|
float ar;
|
|
float _cos;
|
|
float _sin;
|
|
int16_t r_min = 0;
|
|
int16_t r_max = 0;
|
|
int16_t x_min = 0;
|
|
int16_t x_max = 0;
|
|
int16_t y_min = 0;
|
|
int16_t y_max = 0;
|
|
int16_t r = 10;
|
|
int16_t x = x0;
|
|
int16_t y = y0;
|
|
int16_t z = z0;
|
|
int8_t _pinda = _PINDA;
|
|
for (n = 0; n < turns; n++)
|
|
{
|
|
uint32_t r_sum = 0;
|
|
for (ad = 0; ad < 720; ad++)
|
|
{
|
|
ar = ad * _PI / 360;
|
|
_cos = cos(ar);
|
|
_sin = sin(ar);
|
|
x = x0 + (int)(_cos * r);
|
|
y = y0 + (int)(_sin * r);
|
|
xyzcal_lineXYZ_to(x, y, z, 1000, 0);
|
|
int8_t pinda = _PINDA;
|
|
if (pinda)
|
|
r += 1;
|
|
else
|
|
{
|
|
r -= 1;
|
|
ad--;
|
|
r_sum -= r;
|
|
}
|
|
if (ad == 0)
|
|
{
|
|
x_min = x0;
|
|
x_max = x0;
|
|
y_min = y0;
|
|
y_max = y0;
|
|
r_min = r;
|
|
r_max = r;
|
|
}
|
|
else if (pinda)
|
|
{
|
|
if (x_min > x) x_min = (2*x + x_min) / 3;
|
|
if (x_max < x) x_max = (2*x + x_max) / 3;
|
|
if (y_min > y) y_min = (2*y + y_min) / 3;
|
|
if (y_max < y) y_max = (2*y + y_max) / 3;
|
|
/* if (x_min > x) x_min = x;
|
|
if (x_max < x) x_max = x;
|
|
if (y_min > y) y_min = y;
|
|
if (y_max < y) y_max = y;*/
|
|
if (r_min > r) r_min = r;
|
|
if (r_max < r) r_max = r;
|
|
}
|
|
r_sum += r;
|
|
/* if (_pinda != pinda)
|
|
{
|
|
if (pinda)
|
|
DBG(_n("!1 x=%d y=%d\n"), x, y);
|
|
else
|
|
DBG(_n("!0 x=%d y=%d\n"), x, y);
|
|
}*/
|
|
_pinda = pinda;
|
|
// DBG(_n("x=%d y=%d rx=%d ry=%d\n"), x, y, rx, ry);
|
|
}
|
|
DBG(_n("x_min=%d x_max=%d y_min=%d y_max=%d r_min=%d r_max=%d r_avg=%d\n"), x_min, x_max, y_min, y_max, r_min, r_max, r_sum / 720);
|
|
if ((n > 2) && (n & 1))
|
|
{
|
|
x0 += (x_min + x_max);
|
|
y0 += (y_min + y_max);
|
|
x0 /= 3;
|
|
y0 /= 3;
|
|
int rx = (x_max - x_min) / 2;
|
|
int ry = (y_max - y_min) / 2;
|
|
r = (rx + ry) / 3;//(rx < ry)?rx:ry;
|
|
DBG(_n("x0=%d y0=%d r=%d\n"), x0, y0, r);
|
|
}
|
|
}
|
|
xyzcal_lineXYZ_to(x0, y0, z, 200, 0);
|
|
}
|
|
#endif //XYZCAL_FIND_POINT_CENTER
|
|
|
|
|
|
uint8_t xyzcal_xycoords2point(int16_t x, int16_t y)
|
|
{
|
|
uint8_t ix = (x > 10000)?1:0;
|
|
uint8_t iy = (y > 10000)?1:0;
|
|
return iy?(3-ix):ix;
|
|
}
|
|
|
|
//MK3
|
|
#if ((MOTHERBOARD == BOARD_EINSY_1_0a))
|
|
const int16_t xyzcal_point_xcoords[4] PROGMEM = {1200, 22000, 22000, 1200};
|
|
const int16_t xyzcal_point_ycoords[4] PROGMEM = {600, 600, 19800, 19800};
|
|
#endif //((MOTHERBOARD == BOARD_EINSY_1_0a))
|
|
|
|
//MK2.5
|
|
#if ((MOTHERBOARD == BOARD_RAMBO_MINI_1_0) || (MOTHERBOARD == BOARD_RAMBO_MINI_1_3))
|
|
const int16_t xyzcal_point_xcoords[4] PROGMEM = {1200, 22000, 22000, 1200};
|
|
const int16_t xyzcal_point_ycoords[4] PROGMEM = {700, 700, 19800, 19800};
|
|
#endif //((MOTHERBOARD == BOARD_RAMBO_MINI_1_0) || (MOTHERBOARD == BOARD_RAMBO_MINI_1_3))
|
|
|
|
const uint16_t xyzcal_point_pattern[12] PROGMEM = {0x000, 0x0f0, 0x1f8, 0x3fc, 0x7fe, 0x7fe, 0x7fe, 0x7fe, 0x3fc, 0x1f8, 0x0f0, 0x000};
|
|
|
|
bool xyzcal_searchZ(void)
|
|
{
|
|
DBG(_n("xyzcal_searchZ x=%ld y=%ld z=%ld\n"), count_position[X_AXIS], count_position[Y_AXIS], count_position[Z_AXIS]);
|
|
int16_t x0 = _X;
|
|
int16_t y0 = _Y;
|
|
int16_t z0 = _Z;
|
|
// int16_t min_z = -6000;
|
|
// int16_t dz = 100;
|
|
int16_t z = z0;
|
|
while (z > -2300) //-6mm + 0.25mm
|
|
{
|
|
uint16_t ad = 0;
|
|
if (xyzcal_spiral8(x0, y0, z, 100, 900, 320, 1, &ad)) //dz=100 radius=900 delay=400
|
|
{
|
|
int16_t x_on = _X;
|
|
int16_t y_on = _Y;
|
|
int16_t z_on = _Z;
|
|
DBG(_n(" ON-SIGNAL at x=%d y=%d z=%d ad=%d\n"), x_on, y_on, z_on, ad);
|
|
return true;
|
|
}
|
|
z -= 400;
|
|
}
|
|
DBG(_n("xyzcal_searchZ no signal\n x=%ld y=%ld z=%ld\n"), count_position[X_AXIS], count_position[Y_AXIS], count_position[Z_AXIS]);
|
|
return false;
|
|
}
|
|
|
|
bool xyzcal_scan_and_process(void)
|
|
{
|
|
DBG(_n("sizeof(block_buffer)=%d\n"), sizeof(block_t)*BLOCK_BUFFER_SIZE);
|
|
// DBG(_n("sizeof(pixels)=%d\n"), 32*32);
|
|
// DBG(_n("sizeof(histo)=%d\n"), 2*16);
|
|
// DBG(_n("sizeof(pattern)=%d\n"), 2*12);
|
|
DBG(_n("sizeof(total)=%d\n"), 32*32+2*16+2*12);
|
|
bool ret = false;
|
|
int16_t x = _X;
|
|
int16_t y = _Y;
|
|
int16_t z = _Z;
|
|
|
|
uint8_t* pixels = (uint8_t*)block_buffer;
|
|
xyzcal_scan_pixels_32x32(x, y, z - 72, 2400, 200, pixels);
|
|
|
|
uint16_t* histo = (uint16_t*)(pixels + 32*32);
|
|
xyzcal_histo_pixels_32x32(pixels, histo);
|
|
|
|
xyzcal_adjust_pixels(pixels, histo);
|
|
|
|
uint16_t* pattern = (uint16_t*)(histo + 2*16);
|
|
for (uint8_t i = 0; i < 12; i++)
|
|
{
|
|
pattern[i] = pgm_read_word((uint16_t*)(xyzcal_point_pattern + i));
|
|
// DBG(_n(" pattern[%d]=%d\n"), i, pattern[i]);
|
|
}
|
|
uint8_t c = 0;
|
|
uint8_t r = 0;
|
|
if (xyzcal_find_pattern_12x12_in_32x32(pixels, pattern, &c, &r) > 66) //total pixels=144, corner=12 (1/2 = 66)
|
|
{
|
|
DBG(_n(" pattern found at %d %d\n"), c, r);
|
|
c += 6;
|
|
r += 6;
|
|
x += ((int16_t)c - 16) << 6;
|
|
y += ((int16_t)r - 16) << 6;
|
|
DBG(_n(" x=%d y=%d z=%d\n"), x, y, z);
|
|
xyzcal_lineXYZ_to(x, y, z, 200, 0);
|
|
ret = true;
|
|
}
|
|
for (uint16_t i = 0; i < sizeof(block_t)*BLOCK_BUFFER_SIZE; i++)
|
|
pixels[i] = 0;
|
|
return ret;
|
|
}
|
|
|
|
bool xyzcal_find_bed_induction_sensor_point_xy(void)
|
|
{
|
|
DBG(_n("xyzcal_find_bed_induction_sensor_point_xy x=%ld y=%ld z=%ld\n"), count_position[X_AXIS], count_position[Y_AXIS], count_position[Z_AXIS]);
|
|
bool ret = false;
|
|
st_synchronize();
|
|
int16_t x = _X;
|
|
int16_t y = _Y;
|
|
int16_t z = _Z;
|
|
uint8_t point = xyzcal_xycoords2point(x, y);
|
|
x = pgm_read_word((uint16_t*)(xyzcal_point_xcoords + point));
|
|
y = pgm_read_word((uint16_t*)(xyzcal_point_ycoords + point));
|
|
DBG(_n("point=%d x=%d y=%d z=%d\n"), point, x, y, z);
|
|
xyzcal_meassure_enter();
|
|
xyzcal_lineXYZ_to(x, y, z, 200, 0);
|
|
if (xyzcal_searchZ())
|
|
{
|
|
int16_t z = _Z;
|
|
xyzcal_lineXYZ_to(x, y, z, 200, 0);
|
|
if (xyzcal_scan_and_process())
|
|
{
|
|
if (xyzcal_find_point_center2(500))
|
|
{
|
|
uint32_t x_avg = 0;
|
|
uint32_t y_avg = 0;
|
|
uint8_t n; for (n = 0; n < 4; n++)
|
|
{
|
|
if (!xyzcal_find_point_center2(1000)) break;
|
|
x_avg += _X;
|
|
y_avg += _Y;
|
|
}
|
|
if (n == 4)
|
|
{
|
|
xyzcal_lineXYZ_to(x_avg >> 2, y_avg >> 2, _Z, 200, 0);
|
|
ret = true;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
xyzcal_meassure_leave();
|
|
return ret;
|
|
}
|
|
|
|
|
|
#endif //NEW_XYZCAL
|