282 lines
7.0 KiB
C
282 lines
7.0 KiB
C
//pat9125.c
|
|
#include "pat9125.h"
|
|
#include <util/delay.h>
|
|
#include <avr/pgmspace.h>
|
|
#include "config.h"
|
|
#include <stdio.h>
|
|
|
|
|
|
//PAT9125 registers
|
|
#define PAT9125_PID1 0x00
|
|
#define PAT9125_PID2 0x01
|
|
#define PAT9125_MOTION 0x02
|
|
#define PAT9125_DELTA_XL 0x03
|
|
#define PAT9125_DELTA_YL 0x04
|
|
#define PAT9125_MODE 0x05
|
|
#define PAT9125_CONFIG 0x06
|
|
#define PAT9125_WP 0x09
|
|
#define PAT9125_SLEEP1 0x0a
|
|
#define PAT9125_SLEEP2 0x0b
|
|
#define PAT9125_RES_X 0x0d
|
|
#define PAT9125_RES_Y 0x0e
|
|
#define PAT9125_DELTA_XYH 0x12
|
|
#define PAT9125_SHUTTER 0x14
|
|
#define PAT9125_FRAME 0x17
|
|
#define PAT9125_ORIENTATION 0x19
|
|
#define PAT9125_BANK_SELECTION 0x7f
|
|
|
|
|
|
#ifdef PAT9125_SWSPI
|
|
#include "swspi.h"
|
|
#endif //PAT9125_SWSPI
|
|
#ifdef PAT9125_SWI2C
|
|
#include "swi2c.h"
|
|
#endif //PAT9125_SWI2C
|
|
|
|
|
|
uint8_t pat9125_PID1 = 0;
|
|
uint8_t pat9125_PID2 = 0;
|
|
int16_t pat9125_x = 0;
|
|
int16_t pat9125_y = 0;
|
|
uint8_t pat9125_b = 0;
|
|
uint8_t pat9125_s = 0;
|
|
|
|
|
|
// Init sequence, address & value.
|
|
const PROGMEM uint8_t pat9125_init_seq1[] = {
|
|
// Disable write protect.
|
|
PAT9125_WP, 0x5a,
|
|
// Set the X resolution to zero to let the sensor know that it could safely ignore movement in the X axis.
|
|
PAT9125_RES_X, PAT9125_XRES,
|
|
// Set the Y resolution to a maximum (or nearly a maximum).
|
|
PAT9125_RES_Y, PAT9125_YRES,
|
|
// Set 12-bit X/Y data format.
|
|
PAT9125_ORIENTATION, 0x04,
|
|
// PAT9125_ORIENTATION, 0x04 | (xinv?0x08:0) | (yinv?0x10:0), //!? direction switching does not work
|
|
// Now continues the magic sequence from the PAT912EL Application Note: Firmware Guides for Tracking Optimization.
|
|
0x5e, 0x08,
|
|
0x20, 0x64,
|
|
0x2b, 0x6d,
|
|
0x32, 0x2f,
|
|
// stopper
|
|
0x0ff
|
|
};
|
|
|
|
// Init sequence, address & value.
|
|
const PROGMEM uint8_t pat9125_init_seq2[] = {
|
|
// Magic sequence to enforce full frame rate of the sensor.
|
|
0x06, 0x028,
|
|
0x33, 0x0d0,
|
|
0x36, 0x0c2,
|
|
0x3e, 0x001,
|
|
0x3f, 0x015,
|
|
0x41, 0x032,
|
|
0x42, 0x03b,
|
|
0x43, 0x0f2,
|
|
0x44, 0x03b,
|
|
0x45, 0x0f2,
|
|
0x46, 0x022,
|
|
0x47, 0x03b,
|
|
0x48, 0x0f2,
|
|
0x49, 0x03b,
|
|
0x4a, 0x0f0,
|
|
0x58, 0x098,
|
|
0x59, 0x00c,
|
|
0x5a, 0x008,
|
|
0x5b, 0x00c,
|
|
0x5c, 0x008,
|
|
0x61, 0x010,
|
|
0x67, 0x09b,
|
|
0x6e, 0x022,
|
|
0x71, 0x007,
|
|
0x72, 0x008,
|
|
// stopper
|
|
0x0ff
|
|
};
|
|
|
|
|
|
uint8_t pat9125_rd_reg(uint8_t addr);
|
|
void pat9125_wr_reg(uint8_t addr, uint8_t data);
|
|
uint8_t pat9125_wr_reg_verify(uint8_t addr, uint8_t data);
|
|
|
|
extern FILE _uartout;
|
|
#define uartout (&_uartout)
|
|
|
|
|
|
uint8_t pat9125_init(void)
|
|
{
|
|
#ifdef PAT9125_SWSPI
|
|
swspi_init();
|
|
#endif //PAT9125_SWSPI
|
|
#ifdef PAT9125_SWI2C
|
|
swi2c_init();
|
|
#endif //PAT9125_SWI2C
|
|
// Verify that the sensor responds with its correct product ID.
|
|
pat9125_PID1 = pat9125_rd_reg(PAT9125_PID1);
|
|
pat9125_PID2 = pat9125_rd_reg(PAT9125_PID2);
|
|
if ((pat9125_PID1 != 0x31) || (pat9125_PID2 != 0x91))
|
|
{
|
|
pat9125_PID1 = pat9125_rd_reg(PAT9125_PID1);
|
|
pat9125_PID2 = pat9125_rd_reg(PAT9125_PID2);
|
|
if ((pat9125_PID1 != 0x31) || (pat9125_PID2 != 0x91))
|
|
return 0;
|
|
}
|
|
|
|
#ifdef PAT9125_NEW_INIT
|
|
// Switch to bank0, not allowed to perform OTS_RegWriteRead.
|
|
pat9125_wr_reg(PAT9125_BANK_SELECTION, 0);
|
|
// Software reset (i.e. set bit7 to 1). It will reset to 0 automatically.
|
|
// After the reset, OTS_RegWriteRead is not allowed.
|
|
pat9125_wr_reg(PAT9125_CONFIG, 0x97);
|
|
// Wait until the sensor reboots.
|
|
// Delay 1ms.
|
|
_delay_us(1000);
|
|
{
|
|
const uint8_t *ptr = pat9125_init_seq1;
|
|
for (;;) {
|
|
const uint8_t addr = pgm_read_byte_near(ptr ++);
|
|
if (addr == 0x0ff)
|
|
break;
|
|
if (! pat9125_wr_reg_verify(addr, pgm_read_byte_near(ptr ++)))
|
|
// Verification of the register write failed.
|
|
return 0;
|
|
}
|
|
}
|
|
// Delay 10ms.
|
|
_delay_ms(10);
|
|
// Switch to bank1, not allowed to perform OTS_RegWrite.
|
|
pat9125_wr_reg(PAT9125_BANK_SELECTION, 0x01);
|
|
{
|
|
const uint8_t *ptr = pat9125_init_seq2;
|
|
for (;;) {
|
|
const uint8_t addr = pgm_read_byte_near(ptr ++);
|
|
if (addr == 0x0ff)
|
|
break;
|
|
if (! pat9125_wr_reg_verify(addr, pgm_read_byte_near(ptr ++)))
|
|
// Verification of the register write failed.
|
|
return 0;
|
|
}
|
|
}
|
|
// Switch to bank0, not allowed to perform OTS_RegWriteRead.
|
|
pat9125_wr_reg(PAT9125_BANK_SELECTION, 0x00);
|
|
// Enable write protect.
|
|
pat9125_wr_reg(PAT9125_WP, 0x00);
|
|
|
|
pat9125_PID1 = pat9125_rd_reg(PAT9125_PID1);
|
|
pat9125_PID2 = pat9125_rd_reg(PAT9125_PID2);
|
|
#endif //PAT9125_NEW_INIT
|
|
|
|
pat9125_wr_reg(PAT9125_RES_X, PAT9125_XRES);
|
|
pat9125_wr_reg(PAT9125_RES_Y, PAT9125_YRES);
|
|
fprintf_P(uartout, PSTR("PAT9125_RES_X=%hhu\n"), pat9125_rd_reg(PAT9125_RES_X));
|
|
fprintf_P(uartout, PSTR("PAT9125_RES_Y=%hhu\n"), pat9125_rd_reg(PAT9125_RES_Y));
|
|
return 1;
|
|
}
|
|
|
|
uint8_t pat9125_update(void)
|
|
{
|
|
if ((pat9125_PID1 == 0x31) && (pat9125_PID2 == 0x91))
|
|
{
|
|
uint8_t ucMotion = pat9125_rd_reg(PAT9125_MOTION);
|
|
pat9125_b = pat9125_rd_reg(PAT9125_FRAME);
|
|
pat9125_s = pat9125_rd_reg(PAT9125_SHUTTER);
|
|
if (pat9125_PID1 == 0xff) return 0;
|
|
if (ucMotion & 0x80)
|
|
{
|
|
uint8_t ucXL = pat9125_rd_reg(PAT9125_DELTA_XL);
|
|
uint8_t ucYL = pat9125_rd_reg(PAT9125_DELTA_YL);
|
|
uint8_t ucXYH = pat9125_rd_reg(PAT9125_DELTA_XYH);
|
|
if (pat9125_PID1 == 0xff) return 0;
|
|
int16_t iDX = ucXL | ((ucXYH << 4) & 0xf00);
|
|
int16_t iDY = ucYL | ((ucXYH << 8) & 0xf00);
|
|
if (iDX & 0x800) iDX -= 4096;
|
|
if (iDY & 0x800) iDY -= 4096;
|
|
pat9125_x += iDX;
|
|
pat9125_y -= iDY; //negative number, because direction switching does not work
|
|
}
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
uint8_t pat9125_update_y(void)
|
|
{
|
|
if ((pat9125_PID1 == 0x31) && (pat9125_PID2 == 0x91))
|
|
{
|
|
uint8_t ucMotion = pat9125_rd_reg(PAT9125_MOTION);
|
|
if (pat9125_PID1 == 0xff) return 0;
|
|
if (ucMotion & 0x80)
|
|
{
|
|
uint8_t ucYL = pat9125_rd_reg(PAT9125_DELTA_YL);
|
|
uint8_t ucXYH = pat9125_rd_reg(PAT9125_DELTA_XYH);
|
|
if (pat9125_PID1 == 0xff) return 0;
|
|
int16_t iDY = ucYL | ((ucXYH << 8) & 0xf00);
|
|
if (iDY & 0x800) iDY -= 4096;
|
|
pat9125_y -= iDY; //negative number, because direction switching does not work
|
|
}
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
uint8_t pat9125_update_y2(void)
|
|
{
|
|
if ((pat9125_PID1 == 0x31) && (pat9125_PID2 == 0x91))
|
|
{
|
|
uint8_t ucMotion = pat9125_rd_reg(PAT9125_MOTION);
|
|
if (pat9125_PID1 == 0xff) return 0; //NOACK error
|
|
if (ucMotion & 0x80)
|
|
{
|
|
int8_t dy = pat9125_rd_reg(PAT9125_DELTA_YL);
|
|
if (pat9125_PID1 == 0xff) return 0; //NOACK error
|
|
pat9125_y -= dy; //negative number, because direction switching does not work
|
|
}
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
uint8_t pat9125_rd_reg(uint8_t addr)
|
|
{
|
|
uint8_t data = 0;
|
|
#ifdef PAT9125_SWSPI
|
|
swspi_start();
|
|
swspi_tx(addr & 0x7f);
|
|
data = swspi_rx();
|
|
swspi_stop();
|
|
#endif //PAT9125_SWSPI
|
|
#ifdef PAT9125_SWI2C
|
|
if (!swi2c_readByte_A8(PAT9125_I2C_ADDR, addr, &data)) //NO ACK error
|
|
{
|
|
pat9125_PID1 = 0xff;
|
|
pat9125_PID2 = 0xff;
|
|
return 0;
|
|
}
|
|
#endif //PAT9125_SWI2C
|
|
return data;
|
|
}
|
|
|
|
void pat9125_wr_reg(uint8_t addr, uint8_t data)
|
|
{
|
|
#ifdef PAT9125_SWSPI
|
|
swspi_start();
|
|
swspi_tx(addr | 0x80);
|
|
swspi_tx(data);
|
|
swspi_stop();
|
|
#endif //PAT9125_SWSPI
|
|
#ifdef PAT9125_SWI2C
|
|
if (!swi2c_writeByte_A8(PAT9125_I2C_ADDR, addr, &data)) //NO ACK error
|
|
{
|
|
pat9125_PID1 = 0xff;
|
|
pat9125_PID2 = 0xff;
|
|
return;
|
|
}
|
|
#endif //PAT9125_SWI2C
|
|
}
|
|
|
|
uint8_t pat9125_wr_reg_verify(uint8_t addr, uint8_t data)
|
|
{
|
|
pat9125_wr_reg(addr, data);
|
|
return pat9125_rd_reg(addr) == data;
|
|
}
|