85 lines
2.8 KiB
C
85 lines
2.8 KiB
C
//uart2.c
|
|
#include "uart2.h"
|
|
#include <avr/io.h>
|
|
#include <avr/interrupt.h>
|
|
#include <avr/pgmspace.h>
|
|
#include "rbuf.h"
|
|
|
|
#define UART2_BAUD 115200
|
|
#define UART_BAUD_SELECT(baudRate,xtalCpu) (((float)(xtalCpu))/(((float)(baudRate))*8.0)-1.0+0.5)
|
|
#define uart2_rxcomplete (UCSR2A & (1 << RXC2))
|
|
#define uart2_txcomplete (UCSR2A & (1 << TXC2))
|
|
#define uart2_txready (UCSR2A & (1 << UDRE2))
|
|
|
|
uint8_t uart2_ibuf[14] = {0, 0};
|
|
|
|
FILE _uart2io = {0};
|
|
|
|
|
|
int uart2_putchar(char c, FILE *stream __attribute__((unused)))
|
|
{
|
|
while (!uart2_txready);
|
|
UDR2 = c; // transmit byte
|
|
// while (!uart2_txcomplete); // wait until byte sent
|
|
// UCSR2A |= (1 << TXC2); // delete TXCflag
|
|
return 0;
|
|
}
|
|
|
|
int uart2_getchar(FILE *stream __attribute__((unused)))
|
|
{
|
|
if (rbuf_empty(uart2_ibuf)) return -1;
|
|
return rbuf_get(uart2_ibuf);
|
|
}
|
|
|
|
//uart init (io + FILE stream)
|
|
void uart2_init(void)
|
|
{
|
|
DDRH &= ~0x01;
|
|
PORTH |= 0x01;
|
|
rbuf_ini(uart2_ibuf, sizeof(uart2_ibuf) - 4);
|
|
UCSR2A |= (1 << U2X2); // baudrate multiplier
|
|
UBRR2L = UART_BAUD_SELECT(UART2_BAUD, F_CPU); // select baudrate
|
|
UCSR2B = (1 << RXEN2) | (1 << TXEN2); // enable receiver and transmitter
|
|
UCSR2B |= (1 << RXCIE2); // enable rx interrupt
|
|
fdev_setup_stream(uart2io, uart2_putchar, uart2_getchar, _FDEV_SETUP_WRITE | _FDEV_SETUP_READ); //setup uart2 i/o stream
|
|
}
|
|
|
|
//returns 1 if chars in input buffer match to str
|
|
//returns -1 if chars does not match and 0 for empty buffer
|
|
int8_t uart2_rx_str_P(const char* str)
|
|
{
|
|
uint8_t r = rbuf_r(uart2_ibuf); //get read index
|
|
uint8_t w = rbuf_w(uart2_ibuf); //get write index
|
|
// printf_P(PSTR("uart2_rx_str_P r=%d w=%d\n"), r, w);
|
|
uint8_t e = rbuf_l(uart2_ibuf) - 1; //get end index
|
|
uint8_t len = strlen_P(str); //get string length
|
|
str += len; //last char will be compared first
|
|
// printf_P(PSTR(" len=%d\n"), len);
|
|
while (len--) //loop over all chars
|
|
{
|
|
if (w == r) return 0; //empty buffer - return 0
|
|
if ((--w) == 255) w = e; //decrement index
|
|
char c0 = pgm_read_byte(--str); //read char from str
|
|
char c1 = uart2_ibuf[4 + w]; //read char from input buffer
|
|
// printf_P(PSTR(" uart2_rx_str_P w=%d l=%d c0=%02x c1=%02x\n"), w, len, c0, c1);
|
|
if (c0 == c1) continue; //if match, continue with next char
|
|
if ((c0 == '\r') && (c1 == '\n')) //match cr as lf
|
|
continue;
|
|
if ((c0 == '\n') && (c1 == '\r')) //match lf as cr
|
|
continue;
|
|
return -1; //no match - return -1
|
|
}
|
|
return 1; //all characters match - return 1
|
|
}
|
|
|
|
ISR(USART2_RX_vect)
|
|
{
|
|
//printf_P(PSTR("USART2_RX_vect \n") );
|
|
if (rbuf_put(uart2_ibuf, UDR2) < 0) // put received byte to buffer
|
|
{ //rx buffer full
|
|
//uart2_rx_clr(); //for sure, clear input buffer
|
|
printf_P(PSTR("USART2 rx Full!!!\n"));
|
|
}
|
|
}
|
|
|