66 lines
2.2 KiB
C
66 lines
2.2 KiB
C
|
#ifndef CONFIG_STORE_H
|
||
|
|
#define CONFIG_STORE_H
|
||
|
|
#define EEPROM_SETTINGS
|
||
|
|
|
||
|
|
#include "Configuration.h"
|
||
|
|
#include <stdint.h>
|
||
|
|
#include <avr/eeprom.h>
|
||
|
|
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
char version[4];
|
||
|
|
float axis_steps_per_unit[4];
|
||
|
|
float max_feedrate_normal[4];
|
||
|
|
unsigned long max_acceleration_units_per_sq_second_normal[4];
|
||
|
|
float acceleration; //!< Normal acceleration mm/s^2 THIS IS THE DEFAULT ACCELERATION for all moves. M204 SXXXX
|
||
|
|
float retract_acceleration; //!< mm/s^2 filament pull-pack and push-forward while standing still in the other axis M204 TXXXX
|
||
|
|
float minimumfeedrate;
|
||
|
|
float mintravelfeedrate;
|
||
|
|
unsigned long minsegmenttime;
|
||
|
|
float max_jerk[4]; //!< Jerk is a maximum immediate velocity change.
|
||
|
|
float add_homing[3];
|
||
|
|
float zprobe_zoffset;
|
||
|
|
float Kp;
|
||
|
|
float Ki;
|
||
|
|
float Kd;
|
||
|
|
float bedKp;
|
||
|
|
float bedKi;
|
||
|
|
float bedKd;
|
||
|
|
int lcd_contrast; //!< unused
|
||
|
|
bool autoretract_enabled;
|
||
|
|
float retract_length;
|
||
|
|
float retract_feedrate;
|
||
|
|
float retract_zlift;
|
||
|
|
float retract_recover_length;
|
||
|
|
float retract_recover_feedrate;
|
||
|
|
bool volumetric_enabled;
|
||
|
|
float filament_size[1]; //!< cross-sectional area of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder.
|
||
|
|
float max_feedrate_silent[4]; //!< max speeds for silent mode
|
||
|
|
unsigned long max_acceleration_units_per_sq_second_silent[4];
|
||
|
|
unsigned char axis_ustep_resolution[4];
|
||
|
|
} M500_conf;
|
||
|
|
|
||
|
|
extern M500_conf cs;
|
||
|
|
|
||
|
|
void Config_ResetDefault();
|
||
|
|
|
||
|
|
#ifndef DISABLE_M503
|
||
|
|
void Config_PrintSettings(uint8_t level = 0);
|
||
|
|
#else
|
||
|
|
FORCE_INLINE void Config_PrintSettings() {}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef EEPROM_SETTINGS
|
||
|
|
void Config_StoreSettings();
|
||
|
|
bool Config_RetrieveSettings();
|
||
|
|
#else
|
||
|
|
FORCE_INLINE void Config_StoreSettings() {}
|
||
|
|
FORCE_INLINE void Config_RetrieveSettings() { Config_ResetDefault(); Config_PrintSettings(); }
|
||
|
|
#endif
|
||
|
|
|
||
|
|
inline uint8_t calibration_status() { return eeprom_read_byte((uint8_t*)EEPROM_CALIBRATION_STATUS); }
|
||
|
|
inline void calibration_status_store(uint8_t status) { eeprom_update_byte((uint8_t*)EEPROM_CALIBRATION_STATUS, status); }
|
||
|
|
inline bool calibration_status_pinda() { return eeprom_read_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA); }
|
||
|
|
|
||
|
|
#endif//CONFIG_STORE_H
|