From 82ed19a72403cb59d2f8cc114ad671d293e7af9c Mon Sep 17 00:00:00 2001
From: siwat <siwat@siwatinc.com>
Date: Sat, 8 Jan 2022 01:49:47 +0700
Subject: [PATCH] Update 'laser-cnc/lasercnc-crealityboard.cfg'

---
 ...asercnc.cfg => lasercnc-crealityboard.cfg} | 62 +++++--------------
 1 file changed, 14 insertions(+), 48 deletions(-)
 rename laser-cnc/{lasercnc.cfg => lasercnc-crealityboard.cfg} (66%)

diff --git a/laser-cnc/lasercnc.cfg b/laser-cnc/lasercnc-crealityboard.cfg
similarity index 66%
rename from laser-cnc/lasercnc.cfg
rename to laser-cnc/lasercnc-crealityboard.cfg
index 98860cc..e506d37 100644
--- a/laser-cnc/lasercnc.cfg
+++ b/laser-cnc/lasercnc-crealityboard.cfg
@@ -10,59 +10,37 @@
 # mini E3 with that SD card.
 
 # See docs/Config_Reference.md for a description of parameters.
-
 [stepper_x]
-step_pin: PB13
-dir_pin: !PB12
-enable_pin: !PB14
+step_pin: PD7
+dir_pin: !PC5
+enable_pin: !PD6
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^PC0
+endstop_pin: ~^PC2
 position_endstop: 0
 position_max: 235
 homing_speed: 50
 
-[tmc2209 stepper_x]
-uart_pin: PC11
-tx_pin: PC10
-uart_address: 0
-run_current: 0.8
-stealthchop_threshold: 999999
-
 [stepper_y]
-step_pin: PB10
-dir_pin: !PB2
-enable_pin: !PB11
+step_pin: PC6
+dir_pin: !PC7
+enable_pin: !PD6
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^PC1
+endstop_pin: ~^PC3
 position_endstop: 0
 position_max: 235
 homing_speed: 50
 
-[tmc2209 stepper_y]
-uart_pin: PC11
-tx_pin: PC10
-uart_address: 2
-run_current: 0.8
-stealthchop_threshold: 999999
-
 [stepper_z]
-step_pin: PB0
-dir_pin: PC5
-enable_pin: !PB1
+step_pin: PB3
+dir_pin: PB2
+enable_pin: !PA5
 microsteps: 16
 rotation_distance: 8
-endstop_pin: ^PC2
-position_endstop: 0
-position_max: 1
-
-[tmc2209 stepper_z]
-uart_pin: PC11
-tx_pin: PC10
-uart_address: 1
-run_current: 0.580
-stealthchop_threshold: 999999
+endstop_pin: ^PC4
+position_endstop: 0.0
+position_max: 250
 
 [output_pin laser]
 pin: !due:PC28
@@ -72,9 +50,6 @@ cycle_time: 0.001
 shutdown_value: 0
 maximum_mcu_duration: 5
 
-[fan]
-pin: PC6
-
 [mcu]
 serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
 
@@ -91,15 +66,6 @@ max_accel: 3000
 max_z_velocity: 5
 max_z_accel: 100
 
-[static_digital_output usb_pullup_enable]
-pins: !PA14
-
-[board_pins]
-aliases:
-    # EXP1 header
-    EXP1_1=PB5,  EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8,  EXP1_9=<GND>,
-    EXP1_2=PA15, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB15, EXP1_10=<5V>
-
 [gcode_macro M3]
 gcode:
     {% set S = params.S|default(0.0)|float %}