add lasercnc.cfg

laser-cnc/lasercnc.cfg

@@ -0,0 +1,59 @@
+[stepper_x]
+step_pin: gpio11
+dir_pin: !gpio10
+enable_pin: !gpio12
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^gpio4
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_x]
+uart_pin: gpio9
+tx_pin: gpio8
+uart_address: 0
+run_current: 0.8
+stealthchop_threshold: 0
+
+[stepper_y]
+step_pin: gpio6
+dir_pin: !gpio5
+enable_pin: !gpio7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^gpio3
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_y]
+uart_pin: gpio9
+tx_pin: gpio8
+uart_address: 2
+run_current: 0.8
+stealthchop_threshold: 0
+
+[fan]
+pin: gpio17
+
+[output_pin laser]
+pin: gpio18
+pwm: True
+hardware_pwm: True
+cycle_time: 0.001
+shutdown_value: 0
+maximum_mcu_duration: 5
+
+[heater_fan controller_fan]
+pin: gpio20
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100