diff --git a/src/GasolineGenerator.cpp b/src/GasolineGenerator.cpp
index ee03510..f72c8e2 100644
--- a/src/GasolineGenerator.cpp
+++ b/src/GasolineGenerator.cpp
@@ -2,24 +2,23 @@
 
 GasolineGenerator::GasolineGenerator()
 {
-
 }
 
 /**
  * @brief Initialize the Gasoline Generator.
- * 
+ *
  * @note This does not start the generator, it only initializes the input and output cards,
- * 
+ *
  * @param inputCard The digital input card used for monitoring the generator state
  * @param outputCard The digital output card used for controlling the generator components
  * @param config The configuration settings for the generator, pins are of input and output cards specified earlier.
  */
-void GasolineGenerator::initialize(DigitalInputCard* inputCard, DigitalOutputCard* outputCard, const GasolineGeneratorConfig &config)
+void GasolineGenerator::initialize(DigitalInputCard *inputCard, DigitalOutputCard *outputCard, const GasolineGeneratorConfig &config)
 {
     this->config = &config;
     this->inputCard = inputCard;
     this->outputCard = outputCard;
-    
+
     // Initialize all outputs to safe state
     setIgnitionSystem(false);
     setStarter(false);
@@ -44,7 +43,7 @@ void GasolineGenerator::initialize(DigitalInputCard* inputCard, DigitalOutputCar
  */
 void GasolineGenerator::loop()
 {
-    unsigned long currentTime = millis();
+    unsigned long currentTime = (xTaskGetTickCount() * 1000) / configTICK_RATE_HZ;
 
     switch (state)
     {
@@ -80,7 +79,7 @@ void GasolineGenerator::loop()
 
 /**
  * @brief Start the gasoline generator.
- * 
+ *
  * This function initiates the startup sequence for the generator.
  * It will close the carburetor valve, power up the ignition system,
  * and engage the starter relay to start the engine.
@@ -93,7 +92,7 @@ void GasolineGenerator::start()
     }
 
     state = GeneratorState::STARTING;
-    startupStartTime = millis();
+    startupStartTime = (xTaskGetTickCount() * 1000) / configTICK_RATE_HZ;
     ignitionStartTime = 0;
     isEngineRunning = false;
     starterEngaged = false;
@@ -103,12 +102,12 @@ void GasolineGenerator::start()
 
     // Step 2: Power up ignition system
     setIgnitionSystem(true);
-    ignitionStartTime = millis();
+    ignitionStartTime = (xTaskGetTickCount() * 1000) / configTICK_RATE_HZ;
 }
 
 /**
  * @brief Shutdown the gasoline generator.
- * 
+ *
  * This function stops the generator by turning off all systems,
  * including the starter, ignition system, and carburetor valve.
  */
@@ -125,7 +124,7 @@ void GasolineGenerator::shutdown()
 
 /**
  * @brief Set the carburetor valve state.
- * 
+ *
  * @param open If true, opens the carburetor valve; if false, closes it.
  * The actual pin state is reversed based on the configuration.
  */
@@ -137,7 +136,7 @@ void GasolineGenerator::setCarburetorValve(bool open)
 
 /**
  * @brief Set the ignition system state.
- * 
+ *
  * @param enable If true, powers the ignition system; if false, turns it off.
  */
 void GasolineGenerator::setIgnitionSystem(bool enable)
@@ -147,7 +146,7 @@ void GasolineGenerator::setIgnitionSystem(bool enable)
 
 /**
  * @brief Set the starter relay state.
- * 
+ *
  * @param enable If true, engages the starter; if false, disengages it.
  */
 void GasolineGenerator::setStarter(bool enable)
@@ -158,10 +157,10 @@ void GasolineGenerator::setStarter(bool enable)
 
 /**
  * @brief Handle the startup sequence of the gasoline generator.
- * 
+ *
  * This function manages the timing and state transitions during the startup process,
  * including engaging the starter and checking for successful engine start.
- * 
+ *
  * @param currentTime The current time in milliseconds since system start.
  */
 void GasolineGenerator::handleStartupSequence(unsigned long currentTime)
@@ -210,7 +209,7 @@ void GasolineGenerator::handleStartupSequence(unsigned long currentTime)
 
 /**
  * @brief Callback function called when the engine has successfully started.
- * 
+ *
  * This function is called when the engine starts successfully after engaging the starter.
  * It turns off the starter, opens the carburetor valve, and transitions to the RUNNING state.
  */
@@ -229,10 +228,10 @@ void GasolineGenerator::onEngineStarted()
 
 /**
  * @brief Handle input changes from the digital input card.
- * 
+ *
  * This function processes changes in the state of input pins, particularly for the power output sensor.
  * It checks if the engine has started or stopped based on the power output sensor state.
- * 
+ *
  * @param pin The pin number that changed state.
  * @param state The new state of the pin (true for HIGH, false for LOW).
  */
diff --git a/src/GasolineGenerator.hpp b/src/GasolineGenerator.hpp
index 9b02add..8dd3dab 100644
--- a/src/GasolineGenerator.hpp
+++ b/src/GasolineGenerator.hpp
@@ -3,7 +3,7 @@
 
 /**
  * @brief Configuration structure for the Gasoline Generator.
- * 
+ *
  * This structure holds the configuration parameters for the gasoline generator,
  * including input and output cards, pin assignments, and sensor settings.
  * It is used to initialize the GasolineGenerator class.
@@ -15,28 +15,28 @@
 struct GasolineGeneratorConfig
 {
     int8_t ignitionSystemPowerRelayPin; // Pin for ignition system power relay
-    int8_t starterRelayPin;          // Pin for starter relay
-    int8_t carburetorValvePin;      // Pin for carburetor control
-    bool carburetorValveReverse;    // If true, 0 means open, 1 means closed else 0 means closed, 1 means open
-    int8_t powerOutputSensorPin = -1; // Pin for monitoring generator power output (-1 to disable)
-    bool usePowerOutputSensor = false; // Enable/disable power output sensor monitoring
+    int8_t starterRelayPin;             // Pin for starter relay
+    int8_t carburetorValvePin;          // Pin for carburetor control
+    bool carburetorValveReverse;        // If true, 0 means open, 1 means closed else 0 means closed, 1 means open
+    int8_t powerOutputSensorPin = -1;   // Pin for monitoring generator power output (-1 to disable)
+    bool usePowerOutputSensor = false;  // Enable/disable power output sensor monitoring
 };
 
 /**
  * @brief Enumeration for the generator states.
  *  This enum defines the possible states of the gasoline generator.
  */
-enum class GeneratorState {
+enum class GeneratorState
+{
     STOPPED,
     STARTING,
     RUNNING,
     SHUTTING_DOWN
 };
 
-
 /**
  * @brief Gasoline Generator class for managing a gasoline-powered generator.
- * 
+ *
  * This class handles the ignition system, starter relay, and carburetor control
  * For startup first it closes the carburetor valve, creating a rich air-fuel mixture,
  * then it powers the ignition system, wait a bit then spin the starter relay to start the engine.
@@ -46,7 +46,7 @@ class GasolineGenerator
 {
 public:
     GasolineGenerator();
-    void initialize(DigitalInputCard* inputCard, DigitalOutputCard* outputCard, const GasolineGeneratorConfig &config);
+    void initialize(DigitalInputCard *inputCard, DigitalOutputCard *outputCard, const GasolineGeneratorConfig &config);
     void loop();
     void start();
     void shutdown();