update config
This commit is contained in:
parent
a724e93a42
commit
a3f74629b5
|
|
@ -1,5 +1,14 @@
|
|||
# Ender 3 S1 Config, Satit Chula Specific
|
||||
|
||||
[printer]
|
||||
kinematics: cartesian
|
||||
max_velocity: 500
|
||||
max_accel: 3000
|
||||
max_accel_to_decel: 3000
|
||||
max_z_velocity: 5
|
||||
square_corner_velocity: 5.0
|
||||
max_z_accel: 100
|
||||
|
||||
[stepper_x]
|
||||
step_pin: PC2
|
||||
dir_pin: PB9
|
||||
|
|
@ -95,14 +104,7 @@ pin: PA0
|
|||
serial: /dev/ttyEnder
|
||||
restart_method: command
|
||||
|
||||
[printer]
|
||||
kinematics: cartesian
|
||||
max_velocity: 500
|
||||
max_accel: 3000
|
||||
max_accel_to_decel: 3000
|
||||
max_z_velocity: 5
|
||||
square_corner_velocity: 5.0
|
||||
max_z_accel: 100
|
||||
|
||||
|
||||
[bltouch]
|
||||
sensor_pin: ^PC14
|
||||
|
|
@ -143,6 +145,7 @@ path: /home/octoprint/.octoprint/uploads
|
|||
[display_status]
|
||||
|
||||
[pause_resume]
|
||||
recover_velocity: 100
|
||||
|
||||
[gcode_macro G29]
|
||||
description: Mesh Bed Leveling
|
||||
|
|
@ -151,66 +154,53 @@ gcode:
|
|||
BED_MESH_CALIBRATE
|
||||
G0 X0Y0Z5
|
||||
|
||||
[gcode_macro PAUSE]
|
||||
description: Pause the actual running print
|
||||
rename_existing: PAUSE_BASE
|
||||
# change this if you need more or less extrusion
|
||||
variable_extrude: 1.0
|
||||
[gcode_macro PARK_NOZZLE_REAR]
|
||||
description: Park the nozzle at the rear of the bed
|
||||
gcode:
|
||||
##### read E from pause macro #####
|
||||
{% set E = printer["gcode_macro PAUSE"].extrude|float %}
|
||||
##### set park positon for x and y #####
|
||||
# default is your max posion from your printer.cfg
|
||||
{% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
|
||||
{% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
|
||||
##### calculate save lift position #####
|
||||
{% set max_z = printer.toolhead.axis_maximum.z|float %}
|
||||
{% set act_z = printer.toolhead.position.z|float %}
|
||||
{% if act_z < (max_z - 2.0) %}
|
||||
{% set z_safe = 2.0 %}
|
||||
{% else %}
|
||||
{% set z_safe = max_z - act_z %}
|
||||
{% endif %}
|
||||
##### end of definitions #####
|
||||
PAUSE_BASE
|
||||
G91
|
||||
{% if printer.extruder.can_extrude|lower == 'true' %}
|
||||
G1 E-{E} F2100
|
||||
{% else %}
|
||||
{action_respond_info("Extruder not hot enough")}
|
||||
{% endif %}
|
||||
{% if "xyz" in printer.toolhead.homed_axes %}
|
||||
G1 Z{z_safe} F900
|
||||
G90
|
||||
G1 X{x_park} Y{y_park} F6000
|
||||
{% else %}
|
||||
{action_respond_info("Printer not homed")}
|
||||
{% endif %}
|
||||
|
||||
[gcode_macro RESUME]
|
||||
description: Resume the actual running print
|
||||
rename_existing: RESUME_BASE
|
||||
gcode:
|
||||
##### read E from pause macro #####
|
||||
{% set E = printer["gcode_macro PAUSE"].extrude|float %}
|
||||
#### get VELOCITY parameter if specified ####
|
||||
{% if 'VELOCITY' in params|upper %}
|
||||
{% set get_params = ('VELOCITY=' + params.VELOCITY) %}
|
||||
{%else %}
|
||||
{% set get_params = "" %}
|
||||
{% endif %}
|
||||
##### end of definitions #####
|
||||
{% if printer.extruder.can_extrude|lower == 'true' %}
|
||||
G91
|
||||
G1 E{E} F2100
|
||||
{% else %}
|
||||
{action_respond_info("Extruder not hot enough")}
|
||||
{% endif %}
|
||||
RESUME_BASE {get_params}
|
||||
G90 ; absolute positioning
|
||||
G0 X0 Y200 F6000 ; move to the rear of the bed
|
||||
|
||||
[gcode_macro CANCEL_PRINT]
|
||||
description: Cancel the actual running print
|
||||
rename_existing: CANCEL_PRINT_BASE
|
||||
rename_existing: BASE_CANCEL_PRINT
|
||||
gcode:
|
||||
TURN_OFF_HEATERS
|
||||
CANCEL_PRINT_BASE
|
||||
M220 S100 ; reset speed factor override percentage to default (100%)
|
||||
M221 S100 ; reset extrusion factor override percentage to default (100%)
|
||||
{% if printer.extruder.temperature > 170 %} ; if extruder is hot, retract filament
|
||||
G1 E-3.0 F3600 ; retract filament by 3mm
|
||||
{% endif %}
|
||||
{% if printer.toolhead.homed_axis == "xyz" %} ; if XYZ is homed, we can move the nozzle
|
||||
G91 ; relative positioning
|
||||
G1 Z+5 F3600 ; move nozzle up 5mm
|
||||
G90 ; absolute positioning
|
||||
PARK_NOZZLE_REAR ; park nozzle
|
||||
{% endif %}
|
||||
CLEAR_PAUSE
|
||||
BASE_CANCEL_PRINT
|
||||
|
||||
[gcode_macro PRINT_START]
|
||||
description: Prepare extruder and bed for printing
|
||||
gcode:
|
||||
G28 ; home all axes
|
||||
M83 ; relative extrusion
|
||||
M104 S{ params.EXTRUDER | float } ; set extruder temp
|
||||
M190 S{ params.BED | float } ; wait for bed to reach temperture
|
||||
M109 S{ params.EXTRUDER | float } ; wait for extruder to reach tempert ure
|
||||
BED_MESH_CALIBRATE ; calibrate bed mesh
|
||||
PARK_NOZZLE_REAR ; park nozzle
|
||||
|
||||
[gcode_macro PRINT_END]
|
||||
description: Turn off extruder and bed after printing
|
||||
gcode:
|
||||
M400 ; wait for moves to finish
|
||||
G91 ; relative positioning
|
||||
M83 ; relative extrusion
|
||||
G1 E-5.0 F2000 ; retract filament
|
||||
M400 ; wait for moves to finish
|
||||
G0 Z5 F2000 ; move nozzle to remove stringing
|
||||
M400 ; wait for moves to finish
|
||||
G90 ; absolute positioning
|
||||
TURN_OFF_HEATERS ; turn off heaters
|
||||
M107 ; turn off fan
|
||||
PARK_NOZZLE_REAR ; park nozzle
|
||||
M84 ; disable motors
|
||||
Loading…
Reference in New Issue