#include <ESPMegaProOS.h>
#include <IRReceiver.hpp>

/**
 * @brief This program helps construct an ir timing table for a air conditioner
 *
 * Each run of this program will generate a new table, for a specific mode and fan speed
 * It will iterate through all the temperature settings, and record the timing for each temperature
 * It will then print the timing table as a C++ 2D array, which can be copied into your main program
 * The first dimension is the temperature, the second dimension is the timing
 */

#define MIN_TEMP 16
#define MAX_TEMP 30
#define MAX_TIMINGS 1000  // 1000 timings should be enough for any remote
#define CAPTURE_TIMEOUT 5 // seconds

uint16_t timings[MAX_TEMP - MIN_TEMP + 1][MAX_TIMINGS] = {0};
uint16_t timings_count[MAX_TEMP - MIN_TEMP + 1] = {0};

ESPMegaPRO espmega = ESPMegaPRO();

void beginRoutine()
{
  Serial.println("Beginning IR capture routine");
  for (int i = MIN_TEMP; i <= MAX_TEMP; i++)
  {
    Serial.printf("Please press the button on your remote for %d degrees\n", i);
    IRReceiver::start_long_receive();
    for (int i = 0; i < CAPTURE_TIMEOUT, i++)
    {
      Serial.printf("Waiting for IR signal... (%d seconds left)\n", CAPTURE_TIMEOUT - i);
    }
    ir_data_t data = IRReceiver::end_receive();
    timing_count[i - MIN_TEMP] = data.count;
    // Copy the timings into the timings array
    memcpy(timings[i - MIN_TEMP], data.data, sizeof(uint16_t) * data.count);
    free(data.data);
  }
  Serial.println("Generating C++ code for the timings, please wait...");
  // Find the maximum number of timings
  int max_timings = 0;
  for (int i = 0; i < MAX_TEMP - MIN_TEMP + 1; i++)
  {
    if (timings_count[i] > max_timings)
    {
      max_timings = timings_count[i];
    }
  }
  // Print the timings
  Serial.println("Done!, please copy the following into your main program");
  Serial.printf("uint16_t timings[%d][%d] = {\n", MAX_TEMP - MIN_TEMP + 1, max_timings);
  for (int i = 0; i < MAX_TEMP - MIN_TEMP + 1; i++)
  {
    Serial.printf("  {");
    for (int j = 0; j < timings_count[i]; j++)
    {
      Serial.printf("%d%s", timings[i][j], j == timings_count[i] - 1 ? "" : ", ");
    }
    Serial.println(i == MAX_TEMP - MIN_TEMP ? "}" : "},");
  }
  Serial.println("};");
  Serial.println("Stopping IR capture routine");
}
void setup()
{
  IRReceiver::begin(17);
  espmega.begin();
}

void loop()
{
  beginRoutine();
  delay(10000);
}