rename folder to template project

Template Project/src/i2c_scanner.cpp.disabled

@@ -0,0 +1,84 @@
+#include <Arduino.h>
+// --------------------------------------
+// i2c_scanner
+//
+// Version 1
+//    This program (or code that looks like it)
+//    can be found in many places.
+//    For example on the Arduino.cc forum.
+//    The original author is not know.
+// Version 2, Juni 2012, Using Arduino 1.0.1
+//     Adapted to be as simple as possible by Arduino.cc user Krodal
+// Version 3, Feb 26  2013
+//    V3 by louarnold
+// Version 4, March 3, 2013, Using Arduino 1.0.3
+//    by Arduino.cc user Krodal.
+//    Changes by louarnold removed.
+//    Scanning addresses changed from 0...127 to 1...119,
+//    according to the i2c scanner by Nick Gammon
+//    https://www.gammon.com.au/forum/?id=10896
+// Version 5, March 28, 2013
+//    As version 4, but address scans now to 127.
+//    A sensor seems to use address 120.
+// Version 6, November 27, 2015.
+//    Added waiting for the Leonardo serial communication.
+//
+//
+// This sketch tests the standard 7-bit addresses
+// Devices with higher bit address might not be seen properly.
+//
+ 
+#include <Wire.h>
+ 
+ 
+void setup()
+{
+  Wire.begin(14,33);
+ 
+  Serial.begin(9600);
+  while (!Serial);             // Leonardo: wait for serial monitor
+  Serial.println("\nI2C Scanner");
+}
+ 
+ 
+void loop()
+{
+  byte error, address;
+  int nDevices;
+ 
+  Serial.println("Scanning...");
+ 
+  nDevices = 0;
+  for(address = 1; address < 127; address++ )
+  {
+    // The i2c_scanner uses the return value of
+    // the Write.endTransmisstion to see if
+    // a device did acknowledge to the address.
+    Wire.beginTransmission(address);
+    error = Wire.endTransmission();
+ 
+    if (error == 0)
+    {
+      Serial.print("I2C device found at address 0x");
+      if (address<16)
+        Serial.print("0");
+      Serial.print(address,HEX);
+      Serial.println("  !");
+ 
+      nDevices++;
+    }
+    else if (error==4)
+    {
+      Serial.print("Unknown error at address 0x");
+      if (address<16)
+        Serial.print("0");
+      Serial.println(address,HEX);
+    }    
+  }
+  if (nDevices == 0)
+    Serial.println("No I2C devices found\n");
+  else
+    Serial.println("done\n");
+ 
+  delay(5000);           // wait 5 seconds for next scan
+}

Template Project/src/input_demo.cpp.disabled

@@ -0,0 +1,22 @@
+#include <Arduino.h>
+#include <PCF8574.h>
+
+PCF8574 inputbank1(0x21);
+
+void setup() {
+    Wire.begin(14,33);
+    Serial.begin(9600);
+    boolean connected = inputbank1.begin();
+    Serial.println("connection state = "+String(connected));
+    inputbank1.write(0, HIGH);
+    delay(50);
+    inputbank1.write(1, HIGH);
+    delay(50);
+}
+
+void loop() {
+    for(int i=2;i<8;i++) {
+        Serial.println(inputbank1.read(i));
+        delay(100);
+    }
+}

Template Project/src/main.cpp

@@ -0,0 +1,9 @@
+#include <ESPMegaPRO.h>
+
+void setup() {
+    ESPMega_begin();
+}
+
+void loop() {
+    ESPMega_loop();
+}

Template Project/src/pwm_demo.cpp.disabled

@@ -0,0 +1,28 @@
+#include <Arduino.h>
+#include "Wire.h"
+#include <Adafruit_PWMServoDriver.h>
+
+Adafruit_PWMServoDriver pwm = Adafruit_PWMServoDriver(0x5F);
+
+void setup() {
+  Wire.begin(14,33);
+  pwm.begin();
+  pwm.setPin(2, 500);
+  pwm.setPin(3, 1000);
+  pwm.setPin(4, 1500);
+  pwm.setPin(5, 2000);
+  pwm.setPin(6, 2500);
+  pwm.setPin(7, 3000);
+  pwm.setPin(8, 3500);
+  pwm.setPin(9, 4000);
+  pwm.setPin(10, 500);
+  pwm.setPin(11, 1000);
+  pwm.setPin(12, 1500);
+  pwm.setPin(13, 2000);
+  pwm.setPin(14, 2500);
+  pwm.setPin(15, 3000);
+
+}
+
+  void loop() {
+}