diff --git a/ESPMegaPRO-firmware/lib/ESPMegaPRO/ClimateCard.cpp b/ESPMegaPRO-firmware/lib/ESPMegaPRO/ClimateCard.cpp
index 274ac17..a29664f 100644
--- a/ESPMegaPRO-firmware/lib/ESPMegaPRO/ClimateCard.cpp
+++ b/ESPMegaPRO-firmware/lib/ESPMegaPRO/ClimateCard.cpp
@@ -50,11 +50,12 @@ bool ClimateCard::begin(AirConditioner ac, uint8_t sensor_type, uint8_t sensor_p
         break;
     }
     updateAirConditioner();
+    return true;
 }
 
 bool ClimateCard::begin(AirConditioner ac)
 {
-    this->begin(ac, AC_SENSOR_TYPE_NONE, 0);
+    return this->begin(ac, AC_SENSOR_TYPE_NONE, 0);
 }
 
 void ClimateCard::loop()
diff --git a/ESPMegaPRO-firmware/lib/ESPMegaPRO/ESPMegaPRO_OOP.cpp b/ESPMegaPRO-firmware/lib/ESPMegaPRO/ESPMegaPRO_OOP.cpp
index a70d3ef..1226e5e 100644
--- a/ESPMegaPRO-firmware/lib/ESPMegaPRO/ESPMegaPRO_OOP.cpp
+++ b/ESPMegaPRO-firmware/lib/ESPMegaPRO/ESPMegaPRO_OOP.cpp
@@ -26,7 +26,7 @@ void ESPMegaPRO::loop() {
             cards[i]->loop();
         }
     }
-    iot.loop();
+    iot->loop();
 }
 bool ESPMegaPRO::installCard(uint8_t slot, ExpansionCard* card) {
     if (slot > 255) return false;
@@ -88,11 +88,27 @@ void ESPMegaPRO::setTime(int hours, int minutes, int seconds, int day, int month
 }
 
 void ESPMegaPRO::enableIotModule() {
-    iot.intr_begin(cards);
+    if (iotEnabled) return;
+    this->iot = new ESPMegaIoT();
+    this->iot->intr_begin(cards);
+    iotEnabled = true;
 }
 
 ExpansionCard* ESPMegaPRO::getCard(uint8_t slot) {
     if (slot > 255) return nullptr;
     if (!cardInstalled[slot]) return nullptr;
     return cards[slot];
+}
+
+void ESPMegaPRO::enableInternalDisplay(HardwareSerial *serial) {
+    if (internalDisplayEnabled) return;
+    if (!iotEnabled) {
+        Serial.println("Cannot Enable Internal Display without IoT Module being enabled!");
+        return;
+    }
+    display = new InternalDisplay(serial);
+    auto bindedGetTime = std::bind(&ESPMegaPRO::getTime, this);
+    display->begin(this->iot,bindedGetTime);
+    internalDisplayEnabled = true;
+
 }
\ No newline at end of file
diff --git a/ESPMegaPRO-firmware/lib/ESPMegaPRO/ESPMegaPRO_OOP.hpp b/ESPMegaPRO-firmware/lib/ESPMegaPRO/ESPMegaPRO_OOP.hpp
index f5162b4..e8a03d1 100644
--- a/ESPMegaPRO-firmware/lib/ESPMegaPRO/ESPMegaPRO_OOP.hpp
+++ b/ESPMegaPRO-firmware/lib/ESPMegaPRO/ESPMegaPRO_OOP.hpp
@@ -29,14 +29,18 @@ class ESPMegaPRO {
         bool installCard(uint8_t slot, ExpansionCard* card);
         bool updateTimeFromNTP();
         void enableIotModule();
+        void enableInternalDisplay(HardwareSerial *serial);
         rtctime_t getTime();
         void setTime(int hours, int minutes, int seconds, int day, int month, int year);
         ExpansionCard* getCard(uint8_t slot);
         FRAM fram;
         DigitalInputCard inputs = DigitalInputCard(INPUT_BANK_A_ADDRESS, INPUT_BANK_B_ADDRESS);
         DigitalOutputCard outputs = DigitalOutputCard(PWM_BANK_ADDRESS);
-        ESPMegaIoT iot = ESPMegaIoT();
+        InternalDisplay *display;
+        ESPMegaIoT *iot;
     private:
+        bool iotEnabled = false;
+        bool internalDisplayEnabled = false;
         ExpansionCard* cards[255];
         bool cardInstalled[255];
         uint8_t cardCount = 0;
diff --git a/ESPMegaPRO-firmware/lib/ESPMegaPRO/Untitled-1.cpp b/ESPMegaPRO-firmware/lib/ESPMegaPRO/Untitled-1.cpp
deleted file mode 100644
index ab7d635..0000000
--- a/ESPMegaPRO-firmware/lib/ESPMegaPRO/Untitled-1.cpp
+++ /dev/null
@@ -1,32 +0,0 @@
-#include "driver/rmt.h"
-
-#define RMT_TX_CHANNEL RMT_CHANNEL_0
-#define RMT_TX_GPIO_NUM GPIO_NUM_4
-
-void app_main() {
-    // Configure RMT transmitter
-    rmt_config_t config = RMT_DEFAULT_CONFIG_TX(RMT_TX_GPIO_NUM, RMT_TX_CHANNEL);
-    config.clk_div = 80;  // Set clock divider for desired frequency (80MHz / 80 = 1MHz)
-    rmt_config(&config);
-    rmt_driver_install(config.channel, 0, 0);
-
-    // Define NEC IR protocol parameters
-    uint16_t irTimingArray[] = { /* Your IR timing array here */ };
-    size_t itemCount = sizeof(irTimingArray) / sizeof(irTimingArray[0]);
-    rmt_item32_t items[itemCount];
-
-    // Convert IR timing array to RMT items
-    for (size_t i = 0; i < itemCount; i++) {
-        items[i].level0 = 1;
-        items[i].duration0 = irTimingArray[i];
-        items[i].level1 = 0;
-        items[i].duration1 = irTimingArray[i];
-    }
-
-    // Send IR signal
-    rmt_write_items(config.channel, items, itemCount, true);
-    rmt_wait_tx_done(config.channel, portMAX_DELAY);
-
-    // Cleanup RMT driver
-    rmt_driver_uninstall(config.channel);
-}
diff --git a/ESPMegaPRO-firmware/src/iot_framdemo.cpp b/ESPMegaPRO-firmware/src/iot_framdemo.cpp
index f7a85d0..0f01881 100644
--- a/ESPMegaPRO-firmware/src/iot_framdemo.cpp
+++ b/ESPMegaPRO-firmware/src/iot_framdemo.cpp
@@ -16,7 +16,7 @@ void setup() {
     espmega.begin();
     espmega.enableIotModule();
     ETH.begin();
-    espmega.iot.bindEthernetInterface(&ETH);
+    espmega.iot->bindEthernetInterface(&ETH);
     NetworkConfig config = {
         .ip = {192, 168, 0, 11},
         .gateway = {192, 168, 0, 1},
@@ -31,9 +31,9 @@ void setup() {
     strcpy(config.password, "password");
     strcpy(config.hostname, "espmega");
     Serial.println("Setting network config");
-    espmega.iot.setNetworkConfig(config);
+    espmega.iot->setNetworkConfig(config);
     Serial.println("Connecting to network");
-    espmega.iot.connectNetwork();
+    espmega.iot->connectNetwork();
     Serial.println("Begin MQTT Modules");
     MqttConfig mqtt_config =  {
         .mqtt_port = 1883,
@@ -43,14 +43,15 @@ void setup() {
     strcpy(mqtt_config.mqtt_server, "192.168.0.26");
     strcpy(mqtt_config.base_topic, "/espmegaoop");
     Serial.println("Loading MQTT Config Struct to IoT Module");
-    espmega.iot.setMqttConfig(mqtt_config);
+    espmega.iot->setMqttConfig(mqtt_config);
     Serial.println("Connecting to MQTT");
-    espmega.iot.connectToMqtt();
+    espmega.iot->connectToMqtt();
     Serial.println("Registering cards");
-    espmega.iot.registerCard(0);
-    espmega.iot.registerCard(1);
+    espmega.iot->registerCard(0);
+    espmega.iot->registerCard(1);
     Serial.println("Initialization Routine Complete");
     espmega.inputs.registerCallback(input_change_callback);
+    espmega.enableInternalDisplay(&Serial);
 }
 
 void loop() {