diff --git a/IRLearner/.gitignore b/IRLearner/.gitignore new file mode 100644 index 0000000..89cc49c --- /dev/null +++ b/IRLearner/.gitignore @@ -0,0 +1,5 @@ +.pio +.vscode/.browse.c_cpp.db* +.vscode/c_cpp_properties.json +.vscode/launch.json +.vscode/ipch diff --git a/IRLearner/.vscode/extensions.json b/IRLearner/.vscode/extensions.json new file mode 100644 index 0000000..080e70d --- /dev/null +++ b/IRLearner/.vscode/extensions.json @@ -0,0 +1,10 @@ +{ + // See http://go.microsoft.com/fwlink/?LinkId=827846 + // for the documentation about the extensions.json format + "recommendations": [ + "platformio.platformio-ide" + ], + "unwantedRecommendations": [ + "ms-vscode.cpptools-extension-pack" + ] +} diff --git a/IRLearner/include/README b/IRLearner/include/README new file mode 100644 index 0000000..194dcd4 --- /dev/null +++ b/IRLearner/include/README @@ -0,0 +1,39 @@ + +This directory is intended for project header files. + +A header file is a file containing C declarations and macro definitions +to be shared between several project source files. You request the use of a +header file in your project source file (C, C++, etc) located in `src` folder +by including it, with the C preprocessing directive `#include'. + +```src/main.c + +#include "header.h" + +int main (void) +{ + ... +} +``` + +Including a header file produces the same results as copying the header file +into each source file that needs it. Such copying would be time-consuming +and error-prone. With a header file, the related declarations appear +in only one place. If they need to be changed, they can be changed in one +place, and programs that include the header file will automatically use the +new version when next recompiled. The header file eliminates the labor of +finding and changing all the copies as well as the risk that a failure to +find one copy will result in inconsistencies within a program. + +In C, the usual convention is to give header files names that end with `.h'. +It is most portable to use only letters, digits, dashes, and underscores in +header file names, and at most one dot. + +Read more about using header files in official GCC documentation: + +* Include Syntax +* Include Operation +* Once-Only Headers +* Computed Includes + +https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html diff --git a/IRLearner/lib/README b/IRLearner/lib/README new file mode 100644 index 0000000..6debab1 --- /dev/null +++ b/IRLearner/lib/README @@ -0,0 +1,46 @@ + +This directory is intended for project specific (private) libraries. +PlatformIO will compile them to static libraries and link into executable file. + +The source code of each library should be placed in a an own separate directory +("lib/your_library_name/[here are source files]"). + +For example, see a structure of the following two libraries `Foo` and `Bar`: + +|--lib +| | +| |--Bar +| | |--docs +| | |--examples +| | |--src +| | |- Bar.c +| | |- Bar.h +| | |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html +| | +| |--Foo +| | |- Foo.c +| | |- Foo.h +| | +| |- README --> THIS FILE +| +|- platformio.ini +|--src + |- main.c + +and a contents of `src/main.c`: +``` +#include +#include + +int main (void) +{ + ... +} + +``` + +PlatformIO Library Dependency Finder will find automatically dependent +libraries scanning project source files. + +More information about PlatformIO Library Dependency Finder +- https://docs.platformio.org/page/librarymanager/ldf.html diff --git a/IRLearner/platformio.ini b/IRLearner/platformio.ini new file mode 100644 index 0000000..d8c8aa2 --- /dev/null +++ b/IRLearner/platformio.ini @@ -0,0 +1,17 @@ +; PlatformIO Project Configuration File +; +; Build options: build flags, source filter +; Upload options: custom upload port, speed and extra flags +; Library options: dependencies, extra library storages +; Advanced options: extra scripting +; +; Please visit documentation for the other options and examples +; https://docs.platformio.org/page/projectconf.html + +[env:wt32-eth01] +platform = espressif32 +board = wt32-eth01 +framework = arduino +lib_deps = siwats/ESPMegaPROR3@^1.3.0 + z3t0/IRremote@^4.2.0 +monitor_speed = 115200 \ No newline at end of file diff --git a/IRLearner/src/main.cpp b/IRLearner/src/main.cpp new file mode 100644 index 0000000..adbf209 --- /dev/null +++ b/IRLearner/src/main.cpp @@ -0,0 +1,32 @@ +#include +// Infrared Transciever +#define IR_RECIEVE_PIN 35 +#define IR_SEND_PIN 17 +//#define MARK_EXCESS_MICROS 20 +#define RAW_BUFFER_LENGTH 1024 +uint16_t rawTicks[] = {2404, 597, 1204, 596, 603, 597, 1203, 598, 603, 597, 1203, 597, 603, 597, 603, 597, 1203, 596, 604, 597, 604, 596, 603, 597, 603, 25810, 2402, 597, 1204, 596, 604, 597, 1203, 597, 603, 597, 1203, 597, 603, 597, 603, 597, 1203, 597, 603, 597, 603, 597, 603, 598, 602, 25804, 2404, 596, 1204, 597, 603, 597, 1203, 597, 603, 597, 1203, 597, 603, 597, 603, 597, 1204, 596, 603, 597, 603, 597, 603, 597, 604, 25803, 2404, 597, 1203, 597, 603, 597, 1203, 597, 603, 597, 1203, 597, 603, 597, 603, 598, 1202, 598, 602, 597, 603, 598, 602, 598, 602, 25805, 2403, 597, 1203, 597, 603, 597, 1203, 597, 603, 598, 1202, 597, 603, 597, 603, 597, 1203, 597, 603, 598, 602, 598, 602, 598, 602, 25804, 2404, 597, 1202, 598, 602, 598, 1202, 598, 602, 598, 1202, 599, 602, 598, 601, 598, 1203, 597, 602, 599, 602, 598, 602, 598, 602, 25804, 2403, 598, 1202, 599, 601, 599, 1202, 598, 601, 598, 1202, 599, 601, 599, 602, 598, 1202, 598, 602, 598, 602, 597, 603, 598, 602, 25805, 2403, 598, 1201, 599, 601, 599, 1202, 598, 602, 598, 1202, 598, 602, 599, 601, 598, 1203, 597, 602, 599, 602, 598, 602, 597, 603}; +#include +void setup() +{ + Serial.begin(115200); + // IrReceiver.begin(IR_RECIEVE_PIN); + IrSender.begin(IR_SEND_PIN); +} + +void loop() +{ + // if (IrReceiver.decode()) + // { + // Serial.println(); + // IrReceiver.printIRSendUsage(&Serial); + // IrReceiver.compensateAndPrintIRResultAsCArray(&Serial, false); + // Serial.println(); + // Serial.println(); + // IrReceiver.resume(); + // } + //IrSender.sendRaw(ir_code_a,sizeof(ir_code_a)/sizeof(ir_code_a[0]),NEC_KHZ); + // IrSender.sendRaw(ir_code_b,sizeof(ir_code_b)/sizeof(ir_code_b[0]),NEC_KHZ); + IrSender.sendRaw(rawTicks,sizeof(rawTicks)/sizeof(rawTicks[0]),NEC_KHZ); + //IrSender.sendSony(0x1, 0x15, 2, 12); + delay(500); +} diff --git a/IRLearner/src/main.cpp.d b/IRLearner/src/main.cpp.d new file mode 100644 index 0000000..0aa18dc --- /dev/null +++ b/IRLearner/src/main.cpp.d @@ -0,0 +1,73 @@ +#include +/* +Author: AnalysIR +Revision: 1.0 + +This code is provided to overcome an issue with Arduino IR libraries +It allows you to capture raw timings for signals longer than 255 marks & spaces. +Typical use case is for long Air conditioner signals. + +You can use the output to plug back into IRremote, to resend the signal. + +This Software was written by AnalysIR. + +Usage: Free to use, subject to conditions posted on blog below. +Please credit AnalysIR and provide a link to our website/blog, where possible. + +Copyright AnalysIR 2014 + +Please refer to the blog posting for conditions associated with use. +http://www.analysir.com/blog/2014/03/19/air-conditioners-problems-recording-long-infrared-remote-control-signals-arduino/ + +Connections: +IR Receiver Arduino +V+ -> +5v +GND -> GND +Signal Out -> Digital Pin 2 +(If using a 3V Arduino, you may connect V+ to +3V) +*/ +void rxIR_Interrupt_Handler(); + +#define LEDPIN 17 +//you may increase this value on Arduinos with greater than 2k SRAM +#define maxLen 800 + +volatile unsigned int irBuffer[maxLen]; //stores timings - volatile because changed by ISR +volatile unsigned int x = 0; //Pointer thru irBuffer - volatile because changed by ISR + +void setup() { + Serial.begin(115200); //change BAUD rate as required + attachInterrupt(digitalPinToInterrupt(35), rxIR_Interrupt_Handler, CHANGE);//set up ISR for receiving IR signal +} + +void loop() { + // put your main code here, to run repeatedly: + + Serial.println(F("Press the button on the remote now - once only")); + delay(5000); // pause 5 secs + if (x) { //if a signal is captured + digitalWrite(LEDPIN, HIGH);//visual indicator that signal received + Serial.println(); + Serial.print(F("Raw: (")); //dump raw header format - for library + Serial.print((x - 1)); + Serial.print(F(") ")); + detachInterrupt(0);//stop interrupts & capture until finshed here + for (int i = 1; i < x; i++) { //now dump the times + if (!(i & 0x1)) Serial.print(F("-")); + Serial.print(irBuffer[i] - irBuffer[i - 1]); + Serial.print(F(", ")); + } + x = 0; + Serial.println(); + Serial.println(); + digitalWrite(LEDPIN, LOW);//end of visual indicator, for this time + attachInterrupt(0, rxIR_Interrupt_Handler, CHANGE);//re-enable ISR for receiving IR signal + } + +} + +void rxIR_Interrupt_Handler() { + if (x > maxLen) return; //ignore if irBuffer is already full + irBuffer[x++] = micros(); //just continually record the time-stamp of signal transitions + +} \ No newline at end of file diff --git a/IRLearner/src/test.txt b/IRLearner/src/test.txt new file mode 100644 index 0000000..aee3f2d --- /dev/null +++ b/IRLearner/src/test.txt @@ -0,0 +1 @@ +{438, 430, 435, 430, 436, 430, 435, 430, 436, 430, 435, 25095, 3467, 1727, 436, 1295, 436, 430, 435, 430, 436, 430, 435, 1295, 436, 430, 436, 430, 436, 429, 435, 431, 436, 1294, 436, 429, 436, 1295, 437, 1294, 437, 429, 436, 1295, 437, 1294, 436, 1295, 436, 1296, 435, 1295, 436, 430, 436, 429, 436, 1295, 436, 432, 434, 429, 436, 429, 436, 430, 436, 429, 436, 431, 434, 431, 435, 430, 436, 430, 436, 429, 436, 1295, 436, 429, 436, 1296, 435, 430, 436, 430, 436, 429, 436, 1295, 436, 1295, 435, 430, 436, 430, 436, 429, 436, 430, 436, 1295, 436, 429, 436, 430, 435, 430, 436, 430, 435, 430, 436, 429, 436, 430, 436, 430, 435, 429, 437, 429, 436, 430, 436, 1295, 436, 1295, 435, 1296, 436, 430, 435, 430, 435, 1296, 436, 1295, 436, 1296, 435, 35481, 3466, 1728, 436, 1296, 435, 429, 436, 430, 436, 429, 436, 1295, 436, 429, 436, 430, 436, 430, 435, 430, 436, 1295, 436, 429, 436, 1295, 436, 1295, 436, 430, 436, 1295, 436, 1295, 436, 1295, 436, 1295, 436, 1295, 436, 429, 436, 430, 436, 1295, 436, 429, 436, 429, 436, 430, 436, 430, 436, 429, 436, 430, 435, 430, 436, 430, 435, 430, 436, 430, 435, 430, 436, 1294, 437, 430, 436, 429, 436, 429, 436, 430, 436, 1295, 436, 429, 437, 429, 436, 430, 435, 431, 435, 429, 436, 430, 436, 430, 436, 429, 436, 430, 435, 430, 436, 430, 436, 429, 435, 430, 437, 1295, 435, 430, 436, 430, 435, 431, 435, 429, 437, 429, 436, 1295, 436, 429, 436, 429, 437, 1295, 436, 1295, 436, 429, 436, 35481, 3466, 1728, 436, 1295, 436, 429, 436, 430, 436, 430, 435, 1296, 436, 429, 436, 429, 436, 430, 436, 429, 436, 1295, 436, 430, 436, 1294, 437, 1296, 435, 429, 436, 1294, 437, 1295, 436, 1295, 436, 1296, 435, 1295, 436, 430, 436, 429, 436, 1295, 435, 431, 435, 430, 436, 430, 435, 430, 436, 430, 435, 430, 436, 430, 435, 430, 436, 430, 435, 430, 436, 429, 437, 429, 436, 429, 437, 429, 436, 429, 436, 430, 435, 430, 436, 429, 436, 1296, 435, 430, 436, 430, 436, 1295, 436, 1295, 436, 1294, 437, 429, 436, 431, 434, 430, 436, 430, 436, 1295, 436, 429, 436, 1295, 436, 1295, 436, 430, 435, 430, 436, 430, 435, 430, 436, 430, 435, 430, 436, 429, 436, 429, 437, 430, 436, 429, 436, 1295, 435, 1296, 436, 1295, 436, 1295, 436, 1295, 436, 1295, 436, 1295, 436, 430, 435, 430, 436, 430, 435, 429, 437, 429, 436, 430, 436, 429, 436, 430, 436, 429, 436, 430, 435, 431, 435, 429, 436, 430, 436, 429, 436, 430, 436, 430, 435, 430, 436, 429, 436, 1295, 436, 1296, 435, 430, 436, 430, 436, 430, 435, 430, 435, 430, 436, 430, 436, 429, 436, 429, 436, 430, 436, 429, 436, 1296, 435, 1295, 437, 429, 436, 429, 437, 429, 436, 429, 437, 429, 436, 430, 435, 430, 436, 429, 436, 430, 436, 429, 436, 430, 436, 429, 436, 429, 436, 430, 436, 430, 437, 427, 437, 430, 435, 1296, 436, 429, 436, 1295, 436, 430, 435, 430, 436, 430, 436, 1295, 435, 1296, 435, 430, 436, 430, 435, 430, 436, 430, 436, 429, 436, 430, 435, 430, 436, 430, 435, 430, 436, 429, 436, 430, 436, 1295, 436, 430, 436, 430, 435, 430, 435, 430, 436, 1295, 436, 430, 436, 430, 435, 430, 435, 1295, 436, 1295, 436, 430, 436, 429, 436} \ No newline at end of file diff --git a/IRLearner/src/test2.txt b/IRLearner/src/test2.txt new file mode 100644 index 0000000..ac2ee0c --- /dev/null +++ b/IRLearner/src/test2.txt @@ -0,0 +1 @@ +2404, 597, 1204, 596, 603, 597, 1203, 598, 603, 597, 1203, 597, 603, 597, 603, 597, 1203, 596, 604, 597, 604, 596, 603, 597, 603, 25810, 2402, 597, 1204, 596, 604, 597, 1203, 597, 603, 597, 1203, 597, 603, 597, 603, 597, 1203, 597, 603, 597, 603, 597, 603, 598, 602, 25804, 2404, 596, 1204, 597, 603, 597, 1203, 597, 603, 597, 1203, 597, 603, 597, 603, 597, 1204, 596, 603, 597, 603, 597, 603, 597, 604, 25803, 2404, 597, 1203, 597, 603, 597, 1203, 597, 603, 597, 1203, 597, 603, 597, 603, 598, 1202, 598, 602, 597, 603, 598, 602, 598, 602, 25805, 2403, 597, 1203, 597, 603, 597, 1203, 597, 603, 598, 1202, 597, 603, 597, 603, 597, 1203, 597, 603, 598, 602, 598, 602, 598, 602, 25804, 2404, 597, 1202, 598, 602, 598, 1202, 598, 602, 598, 1202, 599, 602, 598, 601, 598, 1203, 597, 602, 599, 602, 598, 602, 598, 602, 25804, 2403, 598, 1202, 599, 601, 599, 1202, 598, 601, 598, 1202, 599, 601, 599, 602, 598, 1202, 598, 602, 598, 602, 597, 603, 598, 602, 25805, 2403, 598, 1201, 599, 601, 599, 1202, 598, 602, 598, 1202, 598, 602, 599, 601, 598, 1203, 597, 602, 599, 602, 598, 602, 597, 603, \ No newline at end of file diff --git a/IRLearner/test/README b/IRLearner/test/README new file mode 100644 index 0000000..9b1e87b --- /dev/null +++ b/IRLearner/test/README @@ -0,0 +1,11 @@ + +This directory is intended for PlatformIO Test Runner and project tests. + +Unit Testing is a software testing method by which individual units of +source code, sets of one or more MCU program modules together with associated +control data, usage procedures, and operating procedures, are tested to +determine whether they are fit for use. Unit testing finds problems early +in the development cycle. + +More information about PlatformIO Unit Testing: +- https://docs.platformio.org/en/latest/advanced/unit-testing/index.html