ESPMegaPRO-v3-SDK/ESPMegaPRO-firmware/src/main.cpp

#include <ESPMegaPRO_OOP.hpp>
#include <InternalDisplay.hpp>
#include <ETH.h>
#include <ClimateCard.hpp>

// #define FRAM_DEBUG

// Demo PLC firmware using the ESPMegaPRO OOP library

ESPMegaPRO espmega = ESPMegaPRO();
const uint16_t irCode[15][4][4][1] = {0};
const char *mode_names[] = {"Off", "Fan-only", "Cool"};
const char *fan_speed_names[] = {"Auto", "Low", "Medium", "High"};

size_t getInfraredCode(uint8_t mode, uint8_t fan_speed, uint8_t temperature, const uint16_t **codePtr)
{
    // Change the code pointer to point to the IR timing array
    *codePtr = &(irCode[mode][fan_speed][temperature][0]);
    return sizeof(irCode[mode][fan_speed][temperature]) / sizeof(uint16_t);
}

AirConditioner ac = {
    .max_temperature = 30,
    .min_temperature = 16,
    .modes = 4,
    .mode_names = mode_names,
    .fan_speeds = 4,
    .fan_speed_names = fan_speed_names,
    .getInfraredCode = &getInfraredCode};

ClimateCard climateCard = ClimateCard(14, ac);

void input_change_callback(uint8_t pin, uint8_t value)
{
    Serial.print("Input change callback: ");
    Serial.print(pin);
    Serial.print(" ");
    Serial.println(value);
}

void setNetworkConfig()
{
    NetworkConfig config = {
        .ip = {192, 168, 0, 11},
        .gateway = {192, 168, 0, 1},
        .subnet = {255, 255, 255, 0},
        .dns1 = {192, 168, 0, 1},
        .dns2 = {192, 168, 0, 1},
        .useStaticIp = true,
        .useWifi = false,
        .wifiUseAuth = false,
    };
    strcpy(config.ssid, "ssid");
    strcpy(config.password, "password");
    strcpy(config.hostname, "espmega");
    Serial.println("Setting network config");
    espmega.iot->setNetworkConfig(config);
    espmega.iot->saveNetworkConfig();
}

void setMqttConfig()
{
    MqttConfig config = {
        .mqtt_port = 1883,
        .mqtt_useauth = false};
    strcpy(config.mqtt_server, "192.168.0.26");
    strcpy(config.base_topic, "/espmegaoop");
    espmega.iot->setMqttConfig(config);
    espmega.iot->saveMqttConfig();
}

void setup()
{
    ESP_LOGI("Initializer", "Starting ESPMegaPRO OOP demo");
    espmega.begin();
    ESP_LOGI("Initializer", "Enabling IOT module");
    espmega.enableIotModule();
    ESP_LOGI("Initializer", "Enabling Ethernet");
    ETH.begin();
    ESP_LOGI("Initializer", "Binding Ethernet to IOT module");
    espmega.iot->bindEthernetInterface(&ETH);
    ESP_LOGI("Initializer", "Loading network config");
    espmega.iot->loadNetworkConfig();
    ESP_LOGI("Initializer", "Connecting to network");
    espmega.iot->connectNetwork();
    ESP_LOGI("Initializer", "Loading MQTT config");
    espmega.iot->loadMqttConfig();
    ESP_LOGI("Initializer", "Connecting to MQTT");
    espmega.iot->connectToMqtt();
    ESP_LOGI("Initializer", "Registering cards 0");
    espmega.iot->registerCard(0);
    ESP_LOGI("Initializer", "Registering cards 1");
    espmega.iot->registerCard(1);
    ESP_LOGI("Initializer", "Registering Input change callback");
    espmega.inputs.registerCallback(input_change_callback);
    ESP_LOGI("Initializer", "Installing climate card");
    espmega.installCard(2, &climateCard);
    ESP_LOGI("Initializer", "Binding climate card to FRAM");
    climateCard.bindFRAM(&espmega.fram, 301);
    ESP_LOGI("Initializer", "Loading climate card state from FRAM");
    climateCard.loadStateFromFRAM();
    ESP_LOGI("Initializer", "Enabling climate card FRAM autosave");
    climateCard.setFRAMAutoSave(true);
    ESP_LOGI("Initializer", "Enabling internal display");
    espmega.enableInternalDisplay(&Serial);
    ESP_LOGI("Initializer", "Binding climate card to internal display");
    espmega.display->bindClimateCard(&climateCard);
}

void loop()
{
    espmega.loop();
#ifdef FRAM_DEBUG
    // Every 20 seconds, dump FRAM 0-500 to serial
    static uint32_t last_fram_dump = 0;
    if (millis() - last_fram_dump >= 20000)
    {
        last_fram_dump = millis();
        Serial.println("Dumping FRAM");
        espmega.dumpFRAMtoSerial(0, 500);
        Serial.println("Dumping FRAM ASCII");
        espmega.dumpFRAMtoSerialASCII(0, 500);
    }
#endif
}