Update 'Dockerfile'

Dockerfile

@@ -1,7 +1,7 @@
-FROM ubuntu:18.04
+FROM ghcr.io/siwatinc/siwat-ubuntubaseimage:focal
 
 ARG DEBIAN_FRONTEND=noninteractive
-ENV TZ=America/New_York
+ENV TZ=Asia/Bangkok
 
 RUN apt-get update && apt-get install -y \
     cmake \
@@ -10,14 +10,16 @@ RUN apt-get update && apt-get install -y \
     unzip \
     psmisc \
     git \
-    python-virtualenv \
+    python3-virtualenv \
     virtualenv \
-    python-dev \
+    python3-dev \
     libffi-dev \
     build-essential \
     tzdata \
     zlib1g-dev \
-    libjpeg-dev
+    libjpeg-dev \
+    ffmpeg \
+    iputils-ping
 
 EXPOSE 5000
 
@@ -39,7 +41,6 @@ RUN git clone --branch $tag https://github.com/foosel/OctoPrint.git /opt/octopri
   && ./venv/bin/pip install .
 
 RUN /opt/octoprint/venv/bin/python -m pip install \
-https://github.com/AlexVerrico/Octoprint-Display-ETA/archive/master.zip \
 https://github.com/1r0b1n0/OctoPrint-Tempsgraph/archive/master.zip \
 https://github.com/tpmullan/OctoPrint-DetailedProgress/archive/master.zip \
 https://github.com/AliceGrey/OctoprintKlipperPlugin/archive/master.zip \
@@ -48,12 +49,21 @@ https://github.com/jneilliii/OctoPrint-BedLevelVisualizer/archive/master.zip \
 https://github.com/OctoPrint/OctoPrint-MQTT/archive/master.zip \
 https://github.com/birkbjo/OctoPrint-Themeify/archive/master.zip \
 https://github.com/jneilliii/OctoPrint-Python3PluginCompatibilityCheck/archive/master.zip \
-https://github.com/OllisGit/OctoPrint-PrintJobHistory/releases/latest/download/master.zip \
 https://github.com/marian42/octoprint-preheat/archive/master.zip \
 https://github.com/OllisGit/OctoPrint-FilamentManager/releases/latest/download/master.zip \
 https://github.com/OllisGit/OctoPrint-DisplayLayerProgress/releases/latest/download/master.zip \
-https://github.com/jneilliii/OctoPrint-UltimakerFormatPackage/archive/master.zip \
+https://github.com/eyal0/OctoPrint-PrintTimeGenius/archive/master.zip \
-https://github.com/jneilliii/OctoPrint-ConsolidateTempControl/archive/master.zip
+https://github.com/jneilliii/OctoPrint-PrusaSlicerThumbnails/archive/master.zip \
+https://gitlab.com/mosaic-mfg/canvas-plugin/-/archive/master/canvas-plugin-master.zip \
+https://github.com/costas-basdekis/MarlinGcodeDocumentation/archive/master.zip \
+https://github.com/crealitycloud/OctoPrint-Crealitycloud/archive/master.zip \
+https://github.com/crysxd/OctoApp-Plugin/archive/refs/heads/release.zip \
+https://github.com/paukstelis/OctoPrint-Cancelobject/archive/master.zip \
+https://github.com/OllisGit/OctoPrint-CostEstimation/releases/latest/download/master.zip \
+https://github.com/eyal0/OctoPrint-MultipleUpload/archive/master.zip \
+https://gitlab.com/mosaic-mfg/canvas-plugin/-/archive/3.0.3/canvas-plugin-3.0.3.zip \
+https://github.com/wgcv/RewriteM600/archive/master.zip \
+https://github.com/TheSpaghettiDetective/OctoPrint-Obico/archive/master.zip
 
 VOLUME /home/octoprint/.octoprint
 
@@ -68,6 +78,7 @@ COPY klippy.sudoers /etc/sudoers.d/klippy
 RUN useradd -ms /bin/bash klippy
 
 # This is to allow the install script to run without error
+RUN rm -f /bin/systemctl
 RUN ln -s /bin/true /bin/systemctl
 
 USER octoprint
@@ -85,5 +96,6 @@ RUN rm -f /bin/systemctl
 
 COPY start.py /
 COPY runklipper.py /
-
+COPY start.sh /
-CMD ["/start.py"]
+COPY printer.cfg /
+CMD bash /start.sh

Jenkinsfile

@@ -0,0 +1,27 @@
+pipeline {
+    agent any
+  
+    stages {
+        stage('Clone') { 
+            steps {
+                git branch: 'ender3s1', url: 'https://git.siwatsystem.com/satitchula-printfarm/octoprint-klipper-docker'
+            }
+        } 
+        stage('Build Docker Image') {
+            steps {
+                script {
+                    image = docker.build("siwatinc/octoprint-klipper:ender3s1","./ --no-cache")
+                }
+            }
+        }
+        stage('Publish Docker Image') {
+            steps {
+                script {
+                    docker.withRegistry("https://ghcr.io/v2") {
+                        image.push()
+                    }
+                }
+            }
+        }
+    }
+}

README.md

@@ -1,57 +1,3 @@
 # OctoPrint-Klipper
 
-My version of a Docker image for running [OctoPrint] and [Klipper] in a single container. Includes a few plugins I find useful.
+This repository contain the code required to run klipper and octoprint in a docker container, made specifically for Satit Chula's Ender 3 S1 Print Farm
-
-Big thanks to [sillyfrog](https://github.com/sillyfrog) for laying the groundwork for this image.
-
-This is very much written for my purposes, so you'll likely need to modify it for your setup. I've been using it for a while now and it's going well. I've successfully run it on these platforms:
-* Orange Pi Zero 512MB
-* AtomicPi
-* Raspberry Pi 4B 1GB (current source of `arm` images)
-
-## Running the container
-
-Create a directory on your host that will persist config files. I use `/home/docker/octoprint-klipper`.
-
-Pull the image. Until I figure out multi platform aware images, you need to specify your arch. Both `arm` and `amd64` images are on DockerHub. If using Raspberry Pi or similar use `arm` in place of `[tag]`.
-
-```shell
-docker pull seanauff/octoprint-klipper:[tag]
-```
-
-Start the container once to populate your config folder:
-
-```
-docker run -d --name octoprint-klipper -e TZ=America/New_York -v /home/docker/octoprint-klipper:/home/octoprint/.octoprint --device /dev/ttyUSB0:/dev/ttyUSB0 -p 5000:5000 seanauff/octoprint-klipper:[tag]
-```
-
-Stop the container, and modify your [Klipper] `printer.cfg` and [Octoprint] `config.yaml` in the config directory as needed.
-
-Restart the container.
-
-A sample docker-compose file is also provided.
-
-If you have any questions, feel free to log an issue on this project, and I'll see if I can help.
-
-## Updates
-
-The easiest way to update is to pull the latest image and recreate the container. You could also build the image yourself to get the latest updates. I have had success in using the Octoprint built in updater to upgrade plugins, as well as install new ones. Any upgrades conducted in this manner will be lost upon recreation of the container.
-
-## Build the image yourself
-
-The DockerHub images may not be as up to date as the repo (`amd64` is autobuilt, but not `arm`), so you can ensure you have the latest by building yourself.
-
-Clone the repository and build the image:
-
-```shell
-git clone https://github.com/seanauff/OctoPrint-Klipper.git
-docker build -t seanauff/octoprint-klipper OctoPrint-Klipper
-```
-
-If you already have an image built and are trying to upgrade, you may need to force the build not to use cache:
-```shell
-docker build -t seanauff/octoprint-klipper --no-cache -pull OctoPrint-Klipper
-```
-
-[Octoprint]: https://github.com/foosel/OctoPrint
-[Klipper]: https://github.com/KevinOConnor/klipper

octoprint_config/cancel_gcode.gcode

@@ -0,0 +1,14 @@
+; move head out of the way
+G91
+G0 Z10
+G28 X Y
+G0 X0Y230
+
+; disable motors
+M84
+
+;disable all heaters
+{% snippet 'disable_hotends' %}
+{% snippet 'disable_bed' %}
+;disable fan
+M106 S0

octoprint_config/config.txt

@@ -0,0 +1,3 @@
+OctoKlipper
+config dir: /home/octoprint/.octoprint
+log: /home/octoprint/.octoprint/logs/serial.log

printer.cfg

@@ -0,0 +1,216 @@
+# Ender 3 S1 Config, Satit Chula Specific
+
+[stepper_x]
+step_pin: PC2
+dir_pin: PB9
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: !PA5
+position_endstop: 0
+position_max: 258
+homing_speed: 50
+
+[stepper_y]
+step_pin: PB8
+dir_pin: PB7
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: !PA6
+position_endstop: 0
+position_max: 230
+homing_speed: 50
+
+[stepper_z]
+step_pin: PB6
+dir_pin: !PB5
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 8
+endstop_pin: probe:z_virtual_endstop
+position_max: 270
+position_min: -1
+
+[extruder]
+max_extrude_only_distance: 100.0
+step_pin: PB4
+dir_pin: PB3
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 7.6190
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PA1
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC5
+control: pid
+pid_Kp: 22.865
+pid_Ki: 1.292
+pid_Kd: 101.178
+min_temp: 0
+max_temp: 265
+pressure_advance = 0.045
+
+[input_shaper]
+shaper_freq_x: 40
+shaper_freq_y: 40
+
+[filament_switch_sensor RunoutSensor]
+pause_on_runout: False
+runout_gcode: PAUSE
+insert_gcode: RESUME
+switch_pin: !PC15
+
+[heater_bed]
+heater_pin: PA7
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC4
+control: pid
+pid_Kp: 69.139
+pid_Ki: 1.273
+pid_Kd: 938.565
+min_temp: 0
+max_temp: 130
+
+[respond]
+default_type: echo
+
+[endstop_phase stepper_x]
+
+[endstop_phase stepper_y]
+
+[gcode_arcs]
+resolution: 1.0
+
+[heater_fan hotend_fan]
+pin: PC0
+heater: extruder
+heater_temp: 50.0
+
+[fan]
+pin: PA0
+
+[mcu]
+serial: /dev/ttyEnder
+restart_method: command
+
+[printer]
+kinematics: cartesian
+max_velocity: 500
+max_accel: 3000
+max_accel_to_decel: 3000
+max_z_velocity: 5
+square_corner_velocity: 5.0
+max_z_accel: 100
+
+[bltouch]
+sensor_pin: ^PC14 
+control_pin: PC13 
+x_offset: -32
+y_offset: -41
+z_offset: 0
+speed:10
+samples:1
+samples_result:average
+probe_with_touch_mode: true
+stow_on_each_sample: false
+
+[safe_z_home]
+home_xy_position: 154,154
+speed: 100
+z_hop: 10
+z_hop_speed: 5
+
+[bed_mesh]
+speed: 100
+mesh_min: 10, 10
+mesh_max: 225, 189
+algorithm: bicubic
+probe_count: 5,5
+
+[palette2]
+serial: /dev/ttyPalette
+baud: 115200
+feedrate_splice: 0.5
+feedrate_normal: 1.0
+auto_load_speed: 2
+auto_cancel_variation: 0.1
+
+[virtual_sdcard]
+path: /home/octoprint/.octoprint/uploads
+
+[display_status]
+
+[pause_resume]
+
+[gcode_macro G29]
+description: Mesh Bed Leveling
+gcode:
+  G28
+  BED_MESH_CALIBRATE
+  G0 X0Y0Z5
+
+[gcode_macro PAUSE]
+description: Pause the actual running print
+rename_existing: PAUSE_BASE
+# change this if you need more or less extrusion
+variable_extrude: 1.0
+gcode:
+  ##### read E from pause macro #####
+  {% set E = printer["gcode_macro PAUSE"].extrude|float %}
+  ##### set park positon for x and y #####
+  # default is your max posion from your printer.cfg
+  {% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
+  {% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
+  ##### calculate save lift position #####
+  {% set max_z = printer.toolhead.axis_maximum.z|float %}
+  {% set act_z = printer.toolhead.position.z|float %}
+  {% if act_z < (max_z - 2.0) %}
+      {% set z_safe = 2.0 %}
+  {% else %}
+      {% set z_safe = max_z - act_z %}
+  {% endif %}
+  ##### end of definitions #####
+  PAUSE_BASE
+  G91
+  {% if printer.extruder.can_extrude|lower == 'true' %}
+    G1 E-{E} F2100
+  {% else %}
+    {action_respond_info("Extruder not hot enough")}
+  {% endif %}
+  {% if "xyz" in printer.toolhead.homed_axes %}
+    G1 Z{z_safe} F900
+    G90
+    G1 X{x_park} Y{y_park} F6000
+  {% else %}
+    {action_respond_info("Printer not homed")}
+  {% endif %} 
+
+[gcode_macro RESUME]
+description: Resume the actual running print
+rename_existing: RESUME_BASE
+gcode:
+  ##### read E from pause macro #####
+  {% set E = printer["gcode_macro PAUSE"].extrude|float %}
+  #### get VELOCITY parameter if specified ####
+  {% if 'VELOCITY' in params|upper %}
+    {% set get_params = ('VELOCITY=' + params.VELOCITY)  %}
+  {%else %}
+    {% set get_params = "" %}
+  {% endif %}
+  ##### end of definitions #####
+  {% if printer.extruder.can_extrude|lower == 'true' %}
+    G91
+    G1 E{E} F2100
+  {% else %}
+    {action_respond_info("Extruder not hot enough")}
+  {% endif %}  
+  RESUME_BASE {get_params}
+
+[gcode_macro CANCEL_PRINT]
+description: Cancel the actual running print
+rename_existing: CANCEL_PRINT_BASE
+gcode:
+  TURN_OFF_HEATERS
+  CANCEL_PRINT_BASE

start.py

@@ -5,37 +5,11 @@ import time
 import os
 import pwd
 
-MJPG = [
-    "/usr/local/bin/mjpg_streamer",
-    "-i",
-    "%(input)s",
-    "-o",
-    "output_http.so -p %(port)s -w /usr/local/share/mjpg-streamer/www/",
-]
 
-MJPG_INPUT_DEFAULT = "input_uvc.so -r HD"
+OCTOPRINT = ["/opt/octoprint/venv/bin/octoprint", "serve","--port","80"]
-
-OCTOPRINT = ["/opt/octoprint/venv/bin/octoprint", "serve"]
 
 
 def main():
-    mjpg_processes = []
-    mjpg_ports = [5000] # Reserve the OctoPrint port
-    for k, v in os.environ.iteritems():
-        if k.startswith("MJPG") and not k.startswith("MJPG_"):
-            v = v.strip()
-            port_env = "MJPG_PORT" + k[4:]
-            port = int(os.environ.get(port_env, 8080))
-            if port in mjpg_ports:
-                raise ValueError("Port %s from key %s already in use" % (port, port_env))
-            if not v:
-                v = MJPG_INPUT_DEFAULT
-            subs = {'input': v, 'port': port}
-            cmd = []
-            for part in MJPG:
-                cmd.append(part % subs)
-            print("Starting: %s" % (cmd,))
-            mjpg_processes.append(subprocess.Popen(cmd))
 
     # Start klipper
     klipper = subprocess.Popen(['sudo', '-u', 'octoprint', '/runklipper.py'])

start.sh

@@ -0,0 +1,6 @@
+#Copy over Initial Printer Config
+cp -n /printer.cfg /home/octoprint/.octoprint/printer.cfg
+chmod 777 -v /home/octoprint/.octoprint/printer.cfg
+
+#Start OctoPrint and Klipper
+python3 /start.py

unitconfig.json

@@ -0,0 +1,18 @@
+{
+    "listeners": {
+        "*:80": {
+            "pass": "routes"
+        }
+   },
+    "routes": [
+        {
+            "match": {
+                "uri": "*"
+            },
+
+            "action": {
+                "proxy": "http://127.0.0.1:5000"
+            }
+        }
+    ]
+}