From 1285bd850331db6177d91016d69b7e85ec35c73a Mon Sep 17 00:00:00 2001
From: Siwat Sirichai <siwat@siwatinc.com>
Date: Thu, 7 Apr 2022 21:02:30 +0700
Subject: [PATCH] add printer.cfg

---
 printer.cfg | 198 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 198 insertions(+)
 create mode 100644 printer.cfg

diff --git a/printer.cfg b/printer.cfg
new file mode 100644
index 0000000..ebe9511
--- /dev/null
+++ b/printer.cfg
@@ -0,0 +1,198 @@
+# Ender 3 S1 Config, Satit Chula Specific
+
+[stepper_x]
+step_pin: PC2
+dir_pin: PB9
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: !PA5
+position_endstop: 0
+position_max: 258
+homing_speed: 50
+
+[stepper_y]
+step_pin: PB8
+dir_pin: PB7
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: !PA6
+position_endstop: 0
+position_max: 230
+homing_speed: 50
+
+[stepper_z]
+step_pin: PB6
+dir_pin: !PB5
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 8
+endstop_pin: probe:z_virtual_endstop
+position_max: 270
+position_min: -5
+
+[extruder]
+max_extrude_only_distance: 100.0
+step_pin: PB4
+dir_pin: PB3
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 7.6190
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PA1
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC5
+control: pid
+pid_Kp: 22.865
+pid_Ki: 1.292
+pid_Kd: 101.178
+min_temp: 0
+max_temp: 250
+pressure_advance = 0.12
+
+[filament_switch_sensor RunoutSensor]
+pause_on_runout: False
+runout_gcode: PAUSE
+insert_gcode: RESUME
+switch_pin: !PC15
+
+[heater_bed]
+heater_pin: PA7
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC4
+control: pid
+pid_Kp: 69.139
+pid_Ki: 1.273
+pid_Kd: 938.565
+min_temp: 0
+max_temp: 130
+
+
+[heater_fan hotend_fan]
+pin: PC0
+heater: extruder
+heater_temp: 50.0
+
+[fan]
+pin: PA0
+
+[mcu]
+serial: /printerserial
+restart_method: command
+
+[printer]
+kinematics: cartesian
+max_velocity: 500
+max_accel: 3000
+max_accel_to_decel: 3000
+max_z_velocity: 5
+square_corner_velocity: 5.0
+max_z_accel: 100
+
+[bltouch]
+sensor_pin: ^PC14 
+control_pin: PC13 
+x_offset: -32
+y_offset: -41
+z_offset: 2.80
+speed:10
+samples:1
+samples_result:average
+probe_with_touch_mode: true
+stow_on_each_sample: false
+
+[safe_z_home]
+home_xy_position: 154,154
+speed: 100
+z_hop: 10
+z_hop_speed: 5
+
+[bed_mesh]
+speed: 100
+mesh_min: 10, 10
+mesh_max: 225, 189
+algorithm: bicubic
+probe_count: 5,5
+
+[temperature_sensor Board_MCU]
+sensor_type: temperature_mcu
+min_temp: 0
+max_temp: 100
+
+[temperature_sensor Raspberry_Pi]
+sensor_type: temperature_host
+min_temp: 0
+max_temp: 100
+
+[virtual_sdcard]
+path: ~/gcode_files
+
+[display_status]
+
+[pause_resume]
+
+[gcode_macro PAUSE]
+description: Pause the actual running print
+rename_existing: PAUSE_BASE
+# change this if you need more or less extrusion
+variable_extrude: 1.0
+gcode:
+  ##### read E from pause macro #####
+  {% set E = printer["gcode_macro PAUSE"].extrude|float %}
+  ##### set park positon for x and y #####
+  # default is your max posion from your printer.cfg
+  {% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
+  {% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
+  ##### calculate save lift position #####
+  {% set max_z = printer.toolhead.axis_maximum.z|float %}
+  {% set act_z = printer.toolhead.position.z|float %}
+  {% if act_z < (max_z - 2.0) %}
+      {% set z_safe = 2.0 %}
+  {% else %}
+      {% set z_safe = max_z - act_z %}
+  {% endif %}
+  ##### end of definitions #####
+  PAUSE_BASE
+  G91
+  {% if printer.extruder.can_extrude|lower == 'true' %}
+    G1 E-{E} F2100
+  {% else %}
+    {action_respond_info("Extruder not hot enough")}
+  {% endif %}
+  {% if "xyz" in printer.toolhead.homed_axes %}
+    G1 Z{z_safe} F900
+    G90
+    G1 X{x_park} Y{y_park} F6000
+  {% else %}
+    {action_respond_info("Printer not homed")}
+  {% endif %} 
+
+[gcode_macro RESUME]
+description: Resume the actual running print
+rename_existing: RESUME_BASE
+gcode:
+  ##### read E from pause macro #####
+  {% set E = printer["gcode_macro PAUSE"].extrude|float %}
+  #### get VELOCITY parameter if specified ####
+  {% if 'VELOCITY' in params|upper %}
+    {% set get_params = ('VELOCITY=' + params.VELOCITY)  %}
+  {%else %}
+    {% set get_params = "" %}
+  {% endif %}
+  ##### end of definitions #####
+  {% if printer.extruder.can_extrude|lower == 'true' %}
+    G91
+    G1 E{E} F2100
+  {% else %}
+    {action_respond_info("Extruder not hot enough")}
+  {% endif %}  
+  RESUME_BASE {get_params}
+
+[gcode_macro CANCEL_PRINT]
+description: Cancel the actual running print
+rename_existing: CANCEL_PRINT_BASE
+gcode:
+  TURN_OFF_HEATERS
+  CANCEL_PRINT_BASE
\ No newline at end of file