Update main.cpp

platformio.ini

@@ -12,6 +12,6 @@
 platform = espressif32
 board = wt32-eth01
 framework = arduino
-lib_deps = siwats/ESPMegaPROR3@^2.5.3
+lib_deps = siwats/ESPMegaPROR3@^2.5.9
 monitor_speed = 115200
 build_flags = -DCORE_DEBUG_LEVEL=0

src/main.cpp

@@ -1,20 +1,28 @@
 #include <main.hpp>
 
-
 /***********************************************
  *            Begin Configuration              *
  ***********************************************/
 
 // Analog Card & Current Transformer Configuration
+#ifdef ANALOG_ENABLE
 bool analogCardAvailable = false;
 AnalogCard analogCard = AnalogCard();
 float voltage = CT_RMS_VOLTAGE;
-CurrentTransformerCard ct1 = CurrentTransformerCard(&analogCard, 0, &voltage, &adc2current, 5000);
+#define CT_INTERVAL 5000
-CurrentTransformerCard ct2 = CurrentTransformerCard(&analogCard, 1, &voltage, &adc2current, 5000);
+CurrentTransformerCard ct1 = CurrentTransformerCard(&analogCard, 0, &voltage, &adc2current, CT_INTERVAL);
-CurrentTransformerCard ct3 = CurrentTransformerCard(&analogCard, 2, &voltage, &adc2current, 5000);
+CurrentTransformerCard ct2 = CurrentTransformerCard(&analogCard, 1, &voltage, &adc2current, CT_INTERVAL);
-CurrentTransformerCard ct4 = CurrentTransformerCard(&analogCard, 3, &voltage, &adc2current, 5000);
+CurrentTransformerCard ct3 = CurrentTransformerCard(&analogCard, 2, &voltage, &adc2current, CT_INTERVAL);
-CurrentTransformerCard ct5 = CurrentTransformerCard(&analogCard, 4, &voltage, &adc2current, 5000);
+CurrentTransformerCard ct4 = CurrentTransformerCard(&analogCard, 3, &voltage, &adc2current, CT_INTERVAL);
-CurrentTransformerCard ct6 = CurrentTransformerCard(&analogCard, 5, &voltage, &adc2current, 5000);
+CurrentTransformerCard ct5 = CurrentTransformerCard(&analogCard, 4, &voltage, &adc2current, CT_INTERVAL);
+CurrentTransformerCard ct6 = CurrentTransformerCard(&analogCard, 5, &voltage, &adc2current, CT_INTERVAL);
+float adc2current(uint16_t adc_val)
+{
+  float voltage = adc_val * 0.0007-0.1994;
+  return voltage;
+}
+
+#endif
 
 // Remote Variables
 RemoteVariable pm25_in = RemoteVariable();
@@ -24,12 +32,6 @@ RemoteVariable weather = RemoteVariable();
 RemoteVariable pm_switch = RemoteVariable();
 RemoteVariable pm_fan_speed = RemoteVariable();
 
-float adc2current(uint16_t adc_val) {
-  return adc_val * 1.0;
-}
-
-#define CT_INTERVAL 5000
-
 // Light Configuration
 uint8_t row = 4;
 uint8_t column = 2;
@@ -93,7 +95,6 @@ void setup()
   bool clear_fram = !gpio_get_level(GPIO_NUM_2);
   // ------------ End GPIO 2 Factory Reset Check ------------
 
-  
   // ------------ Display Pre Initialization Routine ------------
   Serial.begin(115200);
   iseDisplayAdapter.begin(ISE_DISPLAY_BAUD_RATE, SERIAL_8N1, ISE_DISPLAY_RX_PIN, ISE_DISPLAY_TX_PIN);
@@ -107,21 +108,19 @@ void setup()
   sendStopBytes();
   // ------------ End Display Pre Initialization Routine ------------
 
-
   // Give flow of control to OS and scheduler
   espmega.begin();
 
-  
   // // ------------ Factory Reset Routine ------------
   // Disable factory reset for now
   espmega.inputs.loop();
 
-  //set debounce time to 200 for pin 0-7
+  // set debounce time to 200 for pin 0-7
-  for (uint16_t i = 0; i < 8; i++){
+  for (uint16_t i = 0; i < 8; i++)
-    espmega.inputs.setDebounceTime(i,200);
+  {
+    espmega.inputs.setDebounceTime(i, 200);
   }
 
-
   // if (clear_fram)
   // {
   //   Serial.print("boot_state.txt=\"Factory Resetting . . .\"");
@@ -134,7 +133,6 @@ void setup()
   // }
   // // ------------ End Factory Reset Routine ------------
 
-
   // ------------ IoT Module Initialization Routine ------------
   Serial.print("boot_state.txt=\"IoT Initializing . . .\"");
   sendStopBytes();
@@ -167,24 +165,22 @@ void setup()
   }
   // ------------ End Inputs and Outputs Initialization Routine ------------
   espmega.outputs.setState(12, true);
-  espmega.outputs.setValue(12,4095);
+  espmega.outputs.setValue(12, 4095);
   espmega.installCard(2, &climateCard_daikin);
   climateCard_daikin.bindFRAM(&espmega.fram, 5000);
   climateCard_daikin.loadStateFromFRAM();
   climateCard_daikin.setFRAMAutoSave(true);
   espmega.display->bindClimateCard(&climateCard_daikin);
 
-  // Current Transformers
+// Current Transformers
+#ifdef ANALOG_ENABLE
   espmega.installCard(4, &analogCard);
-
   espmega.installCard(5, &ct1);
   ct1.bindFRAM(&espmega.fram, 6000);
   espmega.iot->registerCard(5);
-
   espmega.installCard(6, &ct2);
   ct2.bindFRAM(&espmega.fram, 6100);
   espmega.iot->registerCard(6);
-
   espmega.installCard(7, &ct3);
   ct3.bindFRAM(&espmega.fram, 6200);
   espmega.iot->registerCard(7);
@@ -197,14 +193,7 @@ void setup()
   espmega.installCard(10, &ct6);
   ct6.bindFRAM(&espmega.fram, 6500);
   espmega.iot->registerCard(10);
-
+#endif
-  // auto binded_display_update_on_pm25_out = std::bind(&display_update,0,std::placeholders::_1);
-  // auto binded_display_update_on_pm25_in = std::bind(&display_update,1,std::placeholders::_1);
-  // auto binded_display_update_on_temp_out = std::bind(&display_update,2,std::placeholders::_1);
-  // auto binded_display_update_on_weather = std::bind(&display_update,3,std::placeholders::_1);
-  // auto binded_display_update_on_pm_switch = std::bind(&display_update,4,std::placeholders::_1);
-  // auto binded_display_update_on_pm_fan_speed = std::bind(&display_update,5,std::placeholders::_1);
-
 
   // ------------ Climate Cards Initialization Routine ------------
   ESP_LOGD("ISE OS", "Setting up climate cards");
@@ -220,13 +209,14 @@ void setup()
 
   // York Climate Card
   ESP_LOGD("ISE OS", "Installing york climate card");
-  espmega.installCard(10, &climateCard_york);
+  espmega.installCard(3, &climateCard_york);
   climateCard_york.bindFRAM(&espmega.fram, 5005);
   climateCard_york.loadStateFromFRAM();
   climateCard_york.setFRAMAutoSave(true);
   // ------------ End Climate Cards Initialization Routine ------------
 
   // ------------ Current Transformer Cards Initialization Routine ------------
+  #ifdef ANALOG_ENABLE
   ESP_LOGD("ISE OS", "Installing current transformer cards");
   // First try to install the analog card
   analogCardAvailable = espmega.installCard(4, &analogCard);
@@ -260,10 +250,9 @@ void setup()
   {
     ESP_LOGE("ISE OS", "Analog card not available, current transformer cards cannot and will not be installed.");
   }
-  ESP_LOGD("ISE OS", "Registering Current Transformer Cards with IoT Module");
+  #endif
   // ------------ End Current Transformer Cards Initialization Routine ------------
 
-
   // ------------ Remote Variables Initialization Routine ------------
   pm25_out.registerCallback(&pm25outupdatedisplay);
   pm25_in.registerCallback(&pm25inupdatedisplay);
@@ -288,15 +277,13 @@ void setup()
   pm_fan_speed.enableSetValue("/pm/set_fan_speed");
   // ------------ End Remote Variables Initialization Routine ------------
 
-
   // ------------ IoT Card Registration Routine ------------
   espmega.iot->registerCard(0);  // Register the Input Card
   espmega.iot->registerCard(1);  // Register the Output Card
   espmega.iot->registerCard(2);  // Register the Climate Card Daikin
-  espmega.iot->registerCard(10); // Register the Climate Card York
+  espmega.iot->registerCard(3); // Register the Climate Card York
   // ------------ End IoT Card Registration Routine ------------
 
-
   // ------------ External Display Initialization Routine ------------
   auto bindedGetTime = std::bind(&ESPMegaPRO::getTime, &espmega);
   iseDisplay.begin(&espmega.inputs, &espmega.outputs, &climateCard_daikin, &climateCard_york, &pm_switch, &pm_fan_speed);
@@ -346,6 +333,29 @@ void loop()
     iseDisplay.updateDateTimeText(time);
     last_time_updated = millis();
   }
+
+#ifdef ANALOG_ENABLE
+  // Send out analog Data every 6 seconds
+  static uint32_t last_analog_sent = 0;
+  if (millis() - last_analog_sent > 6000)
+  {
+    espmega.iot->publish("/debug/up", "1");
+    if (analogCardAvailable || CT_FORCE_ENABLE)
+    {
+      espmega.iot->publish("/debug/log", "Sending Analog Card Data");
+      char topic_buffer[50];
+      char payload_buffer[50];
+      // Publish ADC Pin 0-7
+      for (uint8_t i = 0; i < 8; i++)
+      {
+        sprintf(topic_buffer, "/debug/analog/%d", i);
+        sprintf(payload_buffer, "%d", analogCard.analogRead(i));
+        espmega.iot->publish(topic_buffer, payload_buffer);
+      }
+    }
+    last_analog_sent = millis();
+  }
+#endif
 }
 
 void on_pin_change(uint8_t pin, uint8_t value)

src/main.hpp

@@ -25,9 +25,9 @@ SET_LOOP_TASK_STACK_SIZE(32*1024);
 #define AIR_CONDITIONER_YORK_IR_PIN 15
 #define AIR_CONDITIONER_RMT_CHANNEL0 RMT_CHANNEL_0
 #define AIR_CONDITIONER_RMT_CHANNEL1 RMT_CHANNEL_1
-
 // CT Configuration
-#define CT_FORCE_ENABLE false
+#define ANALOG_ENABLE
+#define CT_FORCE_ENABLE true
 #define CT_RMS_VOLTAGE 1.0
 #define CT_PIN_LIGHT_PHASE1 0
 #define CT_PIN_LIGHT_PHASE2 1