change AC behavior; comfirmed work

src/ise_display.cpp

@@ -26,7 +26,8 @@ void ISEDisplay::begin(DigitalInputCard *inputCard, DigitalOutputCard *outputCar
     this->user_mode = 2;                                          // initialized to cool by default
     this->ac_lock_state = strcmp(ac_lock->getValue(), "on") == 0; // initialized to get value
     this->pm_lock_state = strcmp(pm_lock->getValue(), "on") == 0; // initialized to get value
-    this->pm_fan_speed = 10;
+    this->pm_fan_speed = 18;
+    remote_pm_fan_speed->setIntValue(this->pm_fan_speed);
     // remote_pm_fan_speed->setValue(pm_fan_speed);
     this->ac_fan_speed = 0;
     this->ac_mode = 0;
@@ -37,6 +38,8 @@ void ISEDisplay::begin(DigitalInputCard *inputCard, DigitalOutputCard *outputCar
     this->lightLevelRow4 = 0;
     this->time_since_last_ac_change = 0;
     this->ac_press_pending = false;
+    this->time_since_ac_staggered_start_call = 0;
+    this->ac_staggered_start_call_pending = false;
     // this->time_since_last_screen_update = 0;
     this->registerTouchCallback(bindedHandleTouch);
     this->reset();
@@ -46,6 +49,7 @@ void ISEDisplay::begin(DigitalInputCard *inputCard, DigitalOutputCard *outputCar
     delay(100);
     this->updateAirPurifierState();
     this->updateSystemtoggle();
+    this->updateAllStandbyToggle();
     this->updateACState();
     this->updateLightGroupStatePageDashboard();
 
@@ -62,7 +66,7 @@ void ISEDisplay::loop()
     recieveSerialCommand();
 
     // Check if the AC state has been changed
-    if (ac_press_pending && (millis() - time_since_last_ac_change) > 5000)
+    if (ac_press_pending && (millis() - time_since_last_ac_change) > 500)
     {
         ESP_LOGI("ISEDisplay", "Sending AC IR code");
         sendACIRcode();
@@ -70,6 +74,15 @@ void ISEDisplay::loop()
         ac_press_pending = false;
         ESP_LOGI("ISEDisplay", "AC press pending set to false");
     }
+    // check for ac staggered start
+    if (ac_staggered_start_call_pending && (millis() - time_since_ac_staggered_start_call) > 3000)
+    {
+        ESP_LOGI("ISEDisplay", "Sending Staggered AC IR code (York)");
+        sendACIRcode();
+        ESP_LOGI("ISEDisplay", "AC Staggered AC IR code (York) sent");
+        ac_staggered_start_call_pending = false;
+        ESP_LOGI("ISEDisplay", "AC staggered start call pending set to false");
+    }
 
     // Check if the MQTT connection has been lost
     static uint32_t last_mqtt_connected_check = 0;
@@ -136,10 +149,15 @@ void ISEDisplay::handleTouch(uint8_t page, uint8_t component, uint8_t touch_type
     {
         switch (component)
         {
+        case COMPONENT_OBJ_STANDBY_LOGO:
+            if (touch_type != TOUCH_TYPE_RELEASE)
+                break;
+            //this->jumpToPage(2);
+            break;
         case COMPONENT_OBJ_STANDBY_BTN_OPEN_ALL_TOGGLE:
             if (touch_type != TOUCH_TYPE_RELEASE)
                 break;
-            allOn();
+            //allToggleStandby();
             this->jumpToPage(2);
             // the function of the button is to open the dashboard from standby
             break;
@@ -151,7 +169,8 @@ void ISEDisplay::handleTouch(uint8_t page, uint8_t component, uint8_t touch_type
         case COMPONENT_OBJ_STANDBY_BTN_AC_TOGGLE:
             if (touch_type != TOUCH_TYPE_RELEASE)
                 break;
-            if (this->ac_lock_state == true){
+            if (this->ac_lock_state == true)
+            {
                 ESP_LOGI("ISEDisplay", "AC lock is on, do nothing");
                 break;
             }
@@ -201,7 +220,8 @@ void ISEDisplay::handleTouch(uint8_t page, uint8_t component, uint8_t touch_type
             if (touch_type != TOUCH_TYPE_RELEASE)
                 break;
             // if ac_lock is true do nothing
-            if (this->ac_lock_state == true){
+            if (this->ac_lock_state == true)
+            {
                 ESP_LOGI("ISEDisplay", "AC lock is on, do nothing");
                 break;
             }
@@ -217,7 +237,8 @@ void ISEDisplay::handleTouch(uint8_t page, uint8_t component, uint8_t touch_type
             if (touch_type != TOUCH_TYPE_RELEASE)
                 break;
             // if ac_lock is true do nothing
-            if (this->ac_lock_state == true){
+            if (this->ac_lock_state == true)
+            {
                 ESP_LOGI("ISEDisplay", "AC lock is on, do nothing");
                 break;
             }
@@ -229,7 +250,8 @@ void ISEDisplay::handleTouch(uint8_t page, uint8_t component, uint8_t touch_type
             if (touch_type != TOUCH_TYPE_RELEASE)
                 break;
             // if ac_lock is true do nothing
-            if (this->ac_lock_state == true){
+            if (this->ac_lock_state == true)
+            {
                 ESP_LOGI("ISEDisplay", "AC lock is on, do nothing");
                 break;
             }
@@ -241,7 +263,8 @@ void ISEDisplay::handleTouch(uint8_t page, uint8_t component, uint8_t touch_type
             if (touch_type != TOUCH_TYPE_RELEASE)
                 break;
             // if pm_lock is true do nothing
-            if (this->pm_lock_state == true){
+            if (this->pm_lock_state == true)
+            {
                 ESP_LOGI("ISEDisplay", "PM lock is on, do nothing");
                 break;
             }
@@ -298,6 +321,7 @@ void ISEDisplay::handleTouch(uint8_t page, uint8_t component, uint8_t touch_type
             if (touch_type != TOUCH_TYPE_RELEASE)
                 break;
             // implement pm speed change
+            changePMfanspeed();
             break;
         case COMPONENT_OBJ_DASHBOARD_BTN_PM_MODE:
             if (touch_type != TOUCH_TYPE_RELEASE)
@@ -307,6 +331,7 @@ void ISEDisplay::handleTouch(uint8_t page, uint8_t component, uint8_t touch_type
         case COMPONENT_OBJ_DASHBOARD_HOLDER_PIC_MASTER_LIGHT:
             break;
         case COMPONENT_OBJ_DASHBOARD_LOGO:
+            jumpToPage(1);
             break;
         case COMPONENT_OBJ_DASHBOARD_HOLDER_PIC_PM_LOCK:
             if (touch_type != TOUCH_TYPE_RELEASE)
@@ -426,6 +451,7 @@ void ISEDisplay::handlePWMChange(uint8_t pin, bool state, uint16_t value)
         {
             // Light
             updateLightGroupStatePageStandby();
+            updateAllStandbyToggle();
             // time_since_last_screen_update = millis(); // update time since last activity
         }
     }
@@ -435,6 +461,7 @@ void ISEDisplay::handlePWMChange(uint8_t pin, bool state, uint16_t value)
         {
             // Light
             updateLightGroupStatePageDashboard();
+            updateSystemtoggle();
             // time_since_last_screen_update = millis(); // update time since last activity
         }
     }
@@ -529,12 +556,13 @@ void ISEDisplay::setAClockstate(bool is_ac_lock_on)
 
 void ISEDisplay::setACstate(uint8_t ac_fan_speed, uint8_t ac_mode, uint8_t ac_temperature)
 {
+    ESP_LOGI("ISEDisplay", "AC state before change is: fan speed: %d, mode: %d, temperature: %d", this->ac_fan_speed, this->ac_mode, this->ac_temperature);
     ESP_LOGI("ISEDisplay", "Setting AC state in memory to: = fan speed: %d, mode: %d, temperature: %d", ac_fan_speed, ac_mode, ac_temperature);
 
     this->ac_fan_speed = ac_fan_speed;
     this->ac_mode = ac_mode;
     this->ac_temperature = ac_temperature;
-    //check ac_temp is within bound of daikin
+    // check ac_temp is within bound of daikin
     if (this->ac_temperature < DAIKIN_MIN_TEMP)
     {
         this->ac_temperature = DAIKIN_MIN_TEMP;
@@ -546,21 +574,30 @@ void ISEDisplay::setACstate(uint8_t ac_fan_speed, uint8_t ac_mode, uint8_t ac_te
     this->time_since_last_ac_change = millis();
     this->ac_press_pending = true;
     updateACState();
+    updateSystemtoggle();
+    updateAllStandbyToggle();
 }
 void ISEDisplay::sendACIRcode()
 {
     uint8_t cur_ac_fan_speed = this->ac_fan_speed;
     uint8_t cur_ac_mode = this->ac_mode;
+    uint8_t before_change_ac_mode = this->climateCard_daikin->getMode();
     uint8_t cur_ac_temperature = this->ac_temperature;
     uint8_t york_temp = cur_ac_temperature;
     // this->climateCard->setFanSpeed(ac_fan_speed);
     ESP_LOGI("ISEDisplay", "AC fan speed set to: %d", cur_ac_fan_speed);
     // this->climateCard->setMode(ac_mode);
+    ESP_LOGI("ISEDisplay", "AC mode before change is set to: %d", before_change_ac_mode);
     ESP_LOGI("ISEDisplay", "AC mode set to: %d", cur_ac_mode);
     // this->climateCard->setTemperature(ac_temperature);
     ESP_LOGI("ISEDisplay", "AC temperature set to: %d", cur_ac_temperature);
     // check if temp is within range of min and max for york if not set an min or max for only york
-    this->climateCard_daikin->setState(cur_ac_mode, cur_ac_fan_speed, cur_ac_temperature);
+    if (ac_staggered_start_call_pending == false)
+    {
+        ESP_LOGI("ISEDisplay", "AC Staggered start call pending is false");
+        this->climateCard_daikin->setState(cur_ac_mode, cur_ac_fan_speed, cur_ac_temperature);
+        ESP_LOGI("ISEDisplay", "Daikin AC IR code sent");
+    }
     if (cur_ac_temperature < YORK_MIN_TEMP)
     {
         york_temp = YORK_MIN_TEMP;
@@ -569,16 +606,37 @@ void ISEDisplay::sendACIRcode()
     {
         york_temp = YORK_MAX_TEMP;
     }
-    if (ac_mode == 3)
+    if (cur_ac_mode == 3 && ac_staggered_start_call_pending == false)
     {
+        ESP_LOGI("ISEDisplay", "AC Staggered start call pending is false");
         this->climateCard_york->setState(0, cur_ac_fan_speed, york_temp);
+        ESP_LOGI("ISEDisplay", "York AC IR code sent to off mode due to swtiching to dry on Daikin");
     }
     else
     {
-        this->climateCard_york->setState(cur_ac_mode, cur_ac_fan_speed, york_temp);
+        // want to stagger start york ac when change state from off (mode 0) to on (mode 1,2,3) by 1 sec without delaying other code
+        if (before_change_ac_mode == 0 && ac_staggered_start_call_pending == false)
+        {
+            ESP_LOGI("ISEDisplay", "cur_ac_mode is 0 and ac_staggered_start_call_pending is false");
+            this->time_since_ac_staggered_start_call = millis();
+            this->ac_staggered_start_call_pending = true;
+            ESP_LOGI("ISEDisplay", "AC staggered start call pending set to true and call time set to current time");
+        }
+        else
+        {
+            ESP_LOGI("ISEDisplay", "AC Staggered start call pending is true or cur_ac_mode is not 0");
+            this->climateCard_york->setState(cur_ac_mode, cur_ac_fan_speed, york_temp);
+            ESP_LOGI("ISEDisplay", "York AC IR code sent");
+            // wondering if there is a case where the ac_staggered_start_call_pending is not set to false after setState have been called
+        }
     }
     // get value of mode fanspeed and temp and print compare to store value
     ESP_LOGI("ISEDisplay", "AC IR code sent");
+    ESP_LOGI("ISEDisplay", "NOTE: ac_staggered_start_call_pending is %d", ac_staggered_start_call_pending);
+    if (ac_staggered_start_call_pending == true)
+    {
+        ESP_LOGI("ISEDisplay", "thus the york ac will not be set to current mode if ac_staggered_start_call_pending is true will be trigger after 1 sec");
+    }
     ESP_LOGI("ISEDisplay", "Daikin fan speed: %d, Daikin mode: %d, Daikin temperature: %d", cur_ac_fan_speed, cur_ac_mode, cur_ac_temperature);
     ESP_LOGI("ISEDisplay", "York fan speed: %d, York mode: %d, York temperature: %d", cur_ac_fan_speed, cur_ac_mode, york_temp);
     ESP_LOGI("ISEDisplay", "getting value of mode, fanspeed and temp from climate card");
@@ -596,6 +654,7 @@ void ISEDisplay::toggleLightGroupState()
     {
         setLightLevel(i, state ? 0 : 3);
     }
+    // for loop might slow it down maybe? idk
 }
 void ISEDisplay::setLightGroupState(uint8_t level)
 {
@@ -622,12 +681,21 @@ void ISEDisplay::toggleLightGroupStateStandby()
 void ISEDisplay::togglePM()
 {
     // Get the current group state
-    bool state = strcmp(pm_switch->getValue(), "on") == 0;
-    ESP_LOGI("ISEDisplay", "Current PM state: %d", state);
-    // Toggle the state
-    pm_switch->setValue(state ? "off" : "on");
-    ESP_LOGI("ISEDisplay", "New PM state: %d", state);
-    // updateAirPurifierState();
+    bool ispmlock = this->pm_lock_state;
+    if (ispmlock)
+    {
+        ESP_LOGI("ISEDisplay", "PM lock is on, do nothing");
+        return;
+    }
+    else
+    {
+        bool state = strcmp(pm_switch->getValue(), "on") == 0;
+        ESP_LOGI("ISEDisplay", "Current PM state: %d", state);
+        // Toggle the state
+        pm_switch->setValue(state ? "off" : "on");
+        ESP_LOGI("ISEDisplay", "New PM state: %d", state);
+        // updateAirPurifierState();
+    }
 }
 void ISEDisplay::toggleACLock()
 {
@@ -699,23 +767,71 @@ void ISEDisplay::changeUserACmode()
     // uint8_t mode = this->climateCard_daikin->getMode();
     ESP_LOGI("ISEDisplay", "Current actual AC mode: %d", mode);
     // Toggle the state
-    // user mode alternate between 1 and 2
+    // user mode alternate between 1, 2, and 3
     ESP_LOGI("ISEDisplay", "User mode BEFORE: %d", user_mode);
-    user_mode = (user_mode) % 2 + 1;
+    // user_mode = (user_mode) % 3 + 1; //loop from 1 to 2 to 3 then back to 1
+    //  Cycle user_mode from 2 to 1 to 3
+    switch (user_mode)
+    {
+    case 2: // If current mode is cool (2), change to fan (1)
+        user_mode = 1;
+        break;
+    case 1: // If current mode is fan (1), change to dry (3)
+        user_mode = 3;
+        break;
+    case 3: // If current mode is dry (3), change to cool (2)
+    default:
+        user_mode = 2;
+        break;
+    }
     ESP_LOGI("ISEDisplay", "User mode AFTER: %d", user_mode);
     if (mode != 0)
     {
         // update mode to new mode
         mode = user_mode;
         ESP_LOGI("ISEDisplay", "change actual AC mode to user mode: %d", mode);
+        setACstate(this->ac_fan_speed, mode, this->ac_temperature);
     }
     else
     { // ie mode is off
         // do nothing as the state is keep in user_mode
         //  the mode will change to user_mode when turn on by toggleAC()
-        ESP_LOGI("ISEDisplay", "do nothing; user mode: %d , actual mode: %d", user_mode, mode);
+        ESP_LOGI("ISEDisplay", "update just user mode display; user mode: %d , actual mode: %d", user_mode, mode);
+        updateuserACmode();
     }
-    updateuserACmode(); // call to update mode part of the display seperately
+
+    // updateuserACmode(); // call to update mode part of the display seperately
+}
+void ISEDisplay::changePMfanspeed()
+{
+    // Get the current group state
+    uint8_t fan_speed = this->pm_fan_speed;
+    uint8_t new_fan_speed = fan_speed;
+    // uint8_t fan_speed = this->climateCard_york->getFanSpeed();
+    ESP_LOGI("ISEDisplay", "Current PM fan speed: %d", fan_speed);
+    // Toggle the state
+    // fan_speed have 3 state high mid low switch between them
+    switch (fan_speed)
+    {
+    case PM_FAN_SPEED_LOW:
+        new_fan_speed = PM_FAN_SPEED_MID;
+        break;
+    case PM_FAN_SPEED_MID:
+        new_fan_speed = PM_FAN_SPEED_HIGH;
+        break;
+    case PM_FAN_SPEED_HIGH:
+        new_fan_speed = PM_FAN_SPEED_LOW;
+        break;
+    default:
+        new_fan_speed = PM_FAN_SPEED_HIGH;
+        break;
+    }
+    ESP_LOGI("ISEDisplay", "New PM fan speed: %d", new_fan_speed);
+    this->pm_fan_speed = new_fan_speed;
+    ESP_LOGI("ISEDisplay", "Setting PM fan speed in memory to: %d", this->pm_fan_speed);
+    remote_pm_fan_speed->setIntValue(this->pm_fan_speed);
+    ESP_LOGI("ISEDisplay", "Setting PM fan speed in remote var to: %d", remote_pm_fan_speed->getValueAsInt());
+    updateAirPurifierState();
 }
 void ISEDisplay::setLightLevel(uint8_t row, uint8_t level)
 {
@@ -838,66 +954,12 @@ void ISEDisplay::updateLightGroupStatePageStandby()
     this->giveSerialMutex();
 }
 void ISEDisplay::updateLightGroupStatePageDashboard()
-{
-    // Calculate the state
-    bool state = calculateLightGroupState();
-    // Send the state to the display
-    if (!this->takeSerialMutex())
-        return;
-
-    this->displayAdapter->print("light_m_sw.pic=");
-    this->displayAdapter->print(state ? COMPONENT_DASHBOARD_PIC_LIGHT_MASTER_ON : COMPONENT_DASHBOARD_PIC_LIGHT_MASTER_OFF);
-    this->sendStopBytes();
-
-    this->displayAdapter->print("light_m_sw.pic2=");
-    this->displayAdapter->print(state ? COMPONENT_DASHBOARD_PIC_LIGHT_MASTER_ON_PRESSED : COMPONENT_DASHBOARD_PIC_LIGHT_MASTER_OFF_PRESSED);
-    this->sendStopBytes();
-
-    for (uint8_t i = 1; i <= 4; i++)
-    {
-        u_int8_t state = getLightLevel(i);
-        updateLightSwitch();
-        switch (state)
-        {
-        case 0:
-            this->displayAdapter->print("light_row");
-            this->displayAdapter->print(i);
-            this->displayAdapter->print(".pic=");
-            this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_ROW_LEVEL_0);
-            this->sendStopBytes();
-            break;
-        case 1:
-            this->displayAdapter->print("light_row");
-            this->displayAdapter->print(i);
-            this->displayAdapter->print(".pic=");
-            this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_ROW_LEVEL_1);
-            this->sendStopBytes();
-            break;
-        case 2:
-            this->displayAdapter->print("light_row");
-            this->displayAdapter->print(i);
-            this->displayAdapter->print(".pic=");
-            this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_ROW_LEVEL_2);
-            this->sendStopBytes();
-            break;
-        case 3:
-            this->displayAdapter->print("light_row");
-            this->displayAdapter->print(i);
-            this->displayAdapter->print(".pic=");
-            this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_ROW_LEVEL_3);
-            this->sendStopBytes();
-            break;
-        default:
-            break;
-        }
-    }
-
-    this->giveSerialMutex();
-}
-void ISEDisplay::updateLightSwitch()
 {
     // Calculate the state
     bool state_master = calculateLightGroupState();
+    uint8_t firstState = getLightLevel(1);
+    bool allMatch = true;
+
     // Send the state to the display
     if (!this->takeSerialMutex())
         return;
@@ -910,16 +972,32 @@ void ISEDisplay::updateLightSwitch()
     this->displayAdapter->print(state_master ? COMPONENT_DASHBOARD_PIC_LIGHT_MASTER_ON_PRESSED : COMPONENT_DASHBOARD_PIC_LIGHT_MASTER_OFF_PRESSED);
     this->sendStopBytes();
 
-    this->giveSerialMutex();
+    // this->displayAdapter->print("light_m_sw.pic=");
+    // this->displayAdapter->print(state ? COMPONENT_DASHBOARD_PIC_LIGHT_MASTER_ON : COMPONENT_DASHBOARD_PIC_LIGHT_MASTER_OFF);
+    // this->sendStopBytes();
 
-    // check state and set for each individual light row
-    // if state is 0 set to off and other(1,2,3) to on
+    // this->displayAdapter->print("light_m_sw.pic2=");
+    // this->displayAdapter->print(state ? COMPONENT_DASHBOARD_PIC_LIGHT_MASTER_ON_PRESSED : COMPONENT_DASHBOARD_PIC_LIGHT_MASTER_OFF_PRESSED);
+    // this->sendStopBytes();
 
     for (uint8_t i = 1; i <= 4; i++)
     {
         u_int8_t state = getLightLevel(i);
-        if (state == 0)
+
+        if (i > 1 && state != firstState)
         {
+            allMatch = false;
+        }
+
+        switch (state)
+        {
+        case 0:
+            this->displayAdapter->print("light_row");
+            this->displayAdapter->print(i);
+            this->displayAdapter->print(".pic=");
+            this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_ROW_LEVEL_0);
+            this->sendStopBytes();
+
             this->displayAdapter->print("light_row");
             this->displayAdapter->print(i);
             this->displayAdapter->print("_sw.pic=");
@@ -931,9 +1009,14 @@ void ISEDisplay::updateLightSwitch()
             this->displayAdapter->print("_sw.pic2=");
             this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_SWITCH_OFF_PRESSED);
             this->sendStopBytes();
-        }
-        else
-        {
+            break;
+        case 1:
+            this->displayAdapter->print("light_row");
+            this->displayAdapter->print(i);
+            this->displayAdapter->print(".pic=");
+            this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_ROW_LEVEL_1);
+            this->sendStopBytes();
+
             this->displayAdapter->print("light_row");
             this->displayAdapter->print(i);
             this->displayAdapter->print("_sw.pic=");
@@ -945,8 +1028,100 @@ void ISEDisplay::updateLightSwitch()
             this->displayAdapter->print("_sw.pic=");
             this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_SWITCH_ON_PRESSED);
             this->sendStopBytes();
+            break;
+        case 2:
+            this->displayAdapter->print("light_row");
+            this->displayAdapter->print(i);
+            this->displayAdapter->print(".pic=");
+            this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_ROW_LEVEL_2);
+            this->sendStopBytes();
+
+            this->displayAdapter->print("light_row");
+            this->displayAdapter->print(i);
+            this->displayAdapter->print("_sw.pic=");
+            this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_SWITCH_ON);
+            this->sendStopBytes();
+
+            this->displayAdapter->print("light_row");
+            this->displayAdapter->print(i);
+            this->displayAdapter->print("_sw.pic=");
+            this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_SWITCH_ON_PRESSED);
+            this->sendStopBytes();
+            break;
+        case 3:
+            this->displayAdapter->print("light_row");
+            this->displayAdapter->print(i);
+            this->displayAdapter->print(".pic=");
+            this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_ROW_LEVEL_3);
+            this->sendStopBytes();
+
+            this->displayAdapter->print("light_row");
+            this->displayAdapter->print(i);
+            this->displayAdapter->print("_sw.pic=");
+            this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_SWITCH_ON);
+            this->sendStopBytes();
+
+            this->displayAdapter->print("light_row");
+            this->displayAdapter->print(i);
+            this->displayAdapter->print("_sw.pic=");
+            this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_SWITCH_ON_PRESSED);
+            this->sendStopBytes();
+            break;
+        default:
+            break;
         }
     }
+
+    if (allMatch)
+    {
+        // All states match, change the master light level which is the firststate
+        // use switch case
+        switch (firstState)
+        {
+        case 0:
+            this->displayAdapter->print("master_light.pic=");
+            this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_MASTER_LEVEL_0);
+            this->sendStopBytes();
+            break;
+        case 1:
+            this->displayAdapter->print("master_light.pic=");
+            this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_MASTER_LEVEL_1);
+            this->sendStopBytes();
+            break;
+        case 2:
+            this->displayAdapter->print("master_light.pic=");
+            this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_MASTER_LEVEL_2);
+            this->sendStopBytes();
+            break;
+        case 3:
+            this->displayAdapter->print("master_light.pic=");
+            this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_MASTER_LEVEL_3);
+            this->sendStopBytes();
+            break;
+        default:
+            this->displayAdapter->print("master_light.pic=");
+            this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_MASTER_LEVEL_D);
+            this->sendStopBytes();
+            break;
+        }
+    }
+    else
+    {
+        this->displayAdapter->print("master_light.pic=");
+        this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_LIGHT_MASTER_LEVEL_D);
+        this->sendStopBytes();
+    }
+
+    this->giveSerialMutex();
+}
+void ISEDisplay::updateLightSwitch()
+{
+    // DEPRECATED
+    //  Calculate the state
+    // not in use due to worse performance
+
+    // check state and set for each individual light row
+    // if state is 0 set to off and other(1,2,3) to on
 }
 bool ISEDisplay::calculateLightGroupState()
 {
@@ -996,13 +1171,50 @@ void ISEDisplay::toggleSystem()
         togglePM();
     }
 }
-void ISEDisplay::allOn()
+void ISEDisplay::allToggleStandby()
 {
-    setLightGroupState(3);
-    setPMstate(true, pm_fan_speed);
-    setACstate(2, ac_fan_speed, ac_temperature);
+    bool lightState = calculateLightGroupState();
+    bool pmState = strcmp(pm_switch->getValue(), "on") == 0;
+    if (ac_mode != 0)
+    {
+        setACstate(0, ac_fan_speed, ac_temperature);
+    }
+    else{
+        setACstate(2, ac_fan_speed, ac_temperature);
+    }
+    if (lightState)
+    {
+        setLightGroupState(0);
+    }
+    else
+    {
+        setLightGroupState(3);
+    }
+    if (pmState)
+    {
+        setPMstate(false, pm_fan_speed);
+    }
+    else
+    {
+        setPMstate(true, pm_fan_speed);
+    }
+    
 }
+void ISEDisplay::updateAllStandbyToggle()
+{
+    bool state = calculateAllState();
+    if (!this->takeSerialMutex())
+        return;
+    this->displayAdapter->print("s_open_all.pic=");
+    this->displayAdapter->print(state ? COMPONENT_STANDBY_PIC_OPEN_ALL_TOGGLE_ON : COMPONENT_STANDBY_PIC_OPEN_ALL_TOGGLE_OFF);
+    this->sendStopBytes();
 
+    this->displayAdapter->print("s_open_all.pic2=");
+    this->displayAdapter->print(state ? COMPONENT_STANDBY_PIC_OPEN_ALL_TOGGLE_ON_PRESSED : COMPONENT_STANDBY_PIC_OPEN_ALL_TOGGLE_OFF_PRESSED);
+    this->sendStopBytes();
+
+    this->giveSerialMutex();
+}
 void ISEDisplay::toggleLightIndividual(uint8_t row)
 {
     // Get the current state
@@ -1063,7 +1275,8 @@ void ISEDisplay::updateAirPurifierState()
         bool state = strcmp(pm_switch->getValue(), "on") == 0;
         this->pm_lock_state = strcmp(pm_lock->getValue(), "on") == 0;
         ESP_LOGI("ISEDisplay", "Updating air purifier state to: %d", state);
-        pm_fan_speed = (int)atof(remote_pm_fan_speed->getValue());
+        pm_fan_speed = this->pm_fan_speed;
+        ESP_LOGI("ISEDisplay", "Updating air purifier fan speed to: %d", pm_fan_speed);
         // Send the state to the display
         if (!this->takeSerialMutex())
             return;
@@ -1080,6 +1293,86 @@ void ISEDisplay::updateAirPurifierState()
         this->displayAdapter->print(this->pm_lock_state ? COMPONENT_DASHBOARD_PIC_LOCK : COMPONENT_DASHBOARD_PIC_UNLOCK);
         this->sendStopBytes();
 
+        this->displayAdapter->print("pm_mode.pic=");
+        this->displayAdapter->print(state ? COMPONENT_DASHBOARD_PIC_AC_MODE_FAN_ON : COMPONENT_DASHBOARD_PIC_AC_MODE_FAN_OFF);
+        this->sendStopBytes();
+
+        this->displayAdapter->print("pm_mode.pic2=");
+        this->displayAdapter->print(state ? COMPONENT_DASHBOARD_PIC_AC_MODE_FAN_ON_PRESSED : COMPONENT_DASHBOARD_PIC_AC_MODE_FAN_OFF_PRESSED);
+        this->sendStopBytes();
+
+        switch (pm_fan_speed)
+        {
+        case PM_FAN_SPEED_LOW:
+            if (state)
+            { // state is on
+                this->displayAdapter->print("pm_speed.pic=");
+                this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_AC_FAN_LOW_ON);
+                this->sendStopBytes();
+
+                this->displayAdapter->print("pm_speed.pic2=");
+                this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_AC_FAN_LOW_ON_PRESSED);
+                this->sendStopBytes();
+            }
+            else
+            { // state is off
+                this->displayAdapter->print("pm_speed.pic=");
+                this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_AC_FAN_LOW_OFF);
+                this->sendStopBytes();
+
+                this->displayAdapter->print("pm_speed.pic2=");
+                this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_AC_FAN_LOW_OFF_PRESSED);
+                this->sendStopBytes();
+            }
+            break;
+        case PM_FAN_SPEED_MID:
+            if (state)
+            { // state is on
+                this->displayAdapter->print("pm_speed.pic=");
+                this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_AC_FAN_MID_ON);
+                this->sendStopBytes();
+
+                this->displayAdapter->print("pm_speed.pic2=");
+                this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_AC_FAN_MID_ON_PRESSED);
+                this->sendStopBytes();
+            }
+            else
+            { // state is off
+                this->displayAdapter->print("pm_speed.pic=");
+                this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_AC_FAN_MID_OFF);
+                this->sendStopBytes();
+
+                this->displayAdapter->print("pm_speed.pic2=");
+                this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_AC_FAN_MID_OFF_PRESSED);
+                this->sendStopBytes();
+            }
+            break;
+        case PM_FAN_SPEED_HIGH:
+            if (state)
+            { // state is on
+                this->displayAdapter->print("pm_speed.pic=");
+                this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_AC_FAN_HIGH_ON);
+                this->sendStopBytes();
+
+                this->displayAdapter->print("pm_speed.pic2=");
+                this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_AC_FAN_HIGH_ON_PRESSED);
+                this->sendStopBytes();
+            }
+            else
+            { // state is off
+                this->displayAdapter->print("pm_speed.pic=");
+                this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_AC_FAN_HIGH_OFF);
+                this->sendStopBytes();
+
+                this->displayAdapter->print("pm_speed.pic2=");
+                this->displayAdapter->print(COMPONENT_DASHBOARD_PIC_AC_FAN_HIGH_OFF_PRESSED);
+                this->sendStopBytes();
+            }
+            break;
+        default:
+            break;
+        }
+
         // this->displayAdapter->print("pm_speed.val=");
         // this->displayAdapter->print(pm_fan_speed);
         // // this->displayAdapter->print("\"");
@@ -1102,6 +1395,8 @@ void ISEDisplay::handleACChange(uint8_t mode, uint8_t fan_speed, uint8_t tempera
 {
     ESP_LOGI("ISEDisplay", "AC state changed: mode: %d, fan speed: %d, temperature: %d", mode, fan_speed, temperature);
     updateACState();
+    updateSystemtoggle();
+    updateAllStandbyToggle();
 }
 void ISEDisplay::updateuserACmode()
 {

src/ise_display.hpp

@@ -31,6 +31,7 @@ class ISEDisplay : public ESPMegaDisplay {
         void updateAirPurifierState();
         void updateAirPurifierStateStandby();
         void updateSystemtoggle();
+        void updateAllStandbyToggle();
         void updateDateTimeText(rtctime_t time);
         void updateWeather(char *weather_string);
         void updateTempOutside(float temp_outside);
@@ -69,6 +70,8 @@ class ISEDisplay : public ESPMegaDisplay {
         uint8_t outputCallbackHandle;
         uint8_t climateCallbackHandle;
         uint32_t time_since_last_ac_change;
+        uint32_t time_since_ac_staggered_start_call;
+        bool ac_staggered_start_call_pending;
         uint8_t user_mode;
         uint8_t ac_lock_state;
         uint8_t pm_lock_state;
@@ -95,7 +98,7 @@ class ISEDisplay : public ESPMegaDisplay {
         void setAClockstate(bool is_ac_lock_on);
         void toggleACLock();
         void togglePMLock();
-        void allOn();
+        void allToggleStandby();
         void toggleLightGroupState();
         void toggleLightGroupStateStandby();
         void toggleLightIndividual(uint8_t row);
@@ -105,5 +108,6 @@ class ISEDisplay : public ESPMegaDisplay {
         void setLightGroupState(uint8_t level);
         void toggleACStandby();
         void changeUserACmode();
+        void changePMfanspeed();
         
 };

src/ise_display_definitions.hpp

@@ -66,6 +66,10 @@ lights have 4 states
 #define MOTION_FRONT 8
 #define MOTION_REAR 9
 
+//PM fanspeed setting
+#define PM_FAN_SPEED_LOW 3
+#define PM_FAN_SPEED_MID 10
+#define PM_FAN_SPEED_HIGH 18
 
 //
 #define DISPLAY_TIMEOUT 5*60*1000 // 5 minutes

src/main.cpp

@@ -1,20 +1,32 @@
 #include <main.hpp>
 
-
 /***********************************************
  *            Begin Configuration              *
  ***********************************************/
 
 // Analog Card & Current Transformer Configuration
-// bool analogCardAvailable = false;
-// AnalogCard analogCard = AnalogCard();
-// float voltage = CT_RMS_VOLTAGE;
-// CurrentTransformerCard ct1 = CurrentTransformerCard(&analogCard, 0, &voltage, &adc2current, 5000);
-// CurrentTransformerCard ct2 = CurrentTransformerCard(&analogCard, 1, &voltage, &adc2current, 5000);
-// CurrentTransformerCard ct3 = CurrentTransformerCard(&analogCard, 2, &voltage, &adc2current, 5000);
-// CurrentTransformerCard ct4 = CurrentTransformerCard(&analogCard, 3, &voltage, &adc2current, 5000);
-// CurrentTransformerCard ct5 = CurrentTransformerCard(&analogCard, 4, &voltage, &adc2current, 5000);
-// CurrentTransformerCard ct6 = CurrentTransformerCard(&analogCard, 5, &voltage, &adc2current, 5000);
+#ifdef ANALOG_ENABLE
+bool analogCardAvailable = false;
+AnalogCard analogCard = AnalogCard();
+float voltage = CT_RMS_VOLTAGE;
+#define CT_INTERVAL 5000
+CurrentTransformerCard ct1 = CurrentTransformerCard(&analogCard, 0, &voltage, &adc2current, CT_INTERVAL);
+CurrentTransformerCard ct2 = CurrentTransformerCard(&analogCard, 1, &voltage, &adc2current, CT_INTERVAL);
+CurrentTransformerCard ct3 = CurrentTransformerCard(&analogCard, 2, &voltage, &adc2current, CT_INTERVAL);
+CurrentTransformerCard ct4 = CurrentTransformerCard(&analogCard, 3, &voltage, &adc2current, CT_INTERVAL);
+CurrentTransformerCard ct5 = CurrentTransformerCard(&analogCard, 6, &voltage, &adc2current, CT_INTERVAL);
+CurrentTransformerCard ct6 = CurrentTransformerCard(&analogCard, 7, &voltage, &adc2current, CT_INTERVAL);
+float adc2current(uint16_t adc_val)
+{
+  // float voltage = adc_val * 0.0007-0.1994;
+  float adc_voltage = adc_val * 0.0007;
+  // 0-10V Output with 30A Current Rating CT
+  float ct_current = adc_voltage / 10.0 * 30.0;
+  return ct_current;
+}
+
+#endif
+
 
 // Remote Variables
 RemoteVariable pm25_in = RemoteVariable();
@@ -26,11 +38,7 @@ RemoteVariable pm_fan_speed = RemoteVariable();
 RemoteVariable pm_lock = RemoteVariable();
 RemoteVariable ac_lock = RemoteVariable();
 
-float adc2current(uint16_t adc_val) {
-  return adc_val * 1.0;
-}
 
-#define CT_INTERVAL 5000
 
 // Light Configuration
 uint8_t row = 4;
@@ -42,8 +50,8 @@ const uint8_t light_array[4][2] = {
     {LIGHT_ROW4_COLUMN1, LIGHT_ROW4_COLUMN2}};
 
 // Air Conditioner Configuration
-const char *mode_names_daikin[] = {"off", "cool", "fan_only", "dry"};
-const char *mode_names_york[] = {"off", "cool", "fan_only"};
+const char *mode_names_daikin[] = {"off", "fan_only", "cool", "dry"};
+const char *mode_names_york[] = {"off", "fan_only", "cool"};
 const char *fan_speed_names[] = {"auto", "high", "medium", "low"};
 
 AirConditioner ac_daikin = {
@@ -70,6 +78,9 @@ AirConditioner ac_york = {
 ESPMegaPRO espmega = ESPMegaPRO();
 ISEDisplay iseDisplay = ISEDisplay(&iseDisplayAdapter, &light_array[0][0], row, column);
 
+ESPMegaDisplayOTA iseDisplayOTA = ESPMegaDisplayOTA();
+ESPMegaDisplayOTA internalDisplayOTA = ESPMegaDisplayOTA();
+
 ClimateCard climateCard_daikin = ClimateCard(AIR_CONDITIONER_DAIKIN_IR_PIN, ac_daikin,
                                              AIR_CONDITIONER_SENSOR_TYPE, AIR_CONDITIONER_SENSOR_PIN,
                                              AIR_CONDITIONER_RMT_CHANNEL0);
@@ -118,11 +129,22 @@ void setup()
   // Disable factory reset for now
   espmega.inputs.loop();
 
-  //set debounce time to 200 for pin 0-7
-  for (uint16_t i = 0; i < 8; i++){
-    espmega.inputs.setDebounceTime(i,200);
+  // set debounce time to 200 for pin 0-7
+  for (uint16_t i = 0; i < 8; i++)
+  {
+    espmega.inputs.setDebounceTime(i, 200);
   }
   
+  // if (clear_fram)
+  // {
+  //   Serial.print("boot_state.txt=\"Factory Resetting . . .\"");
+  //   sendStopBytes();
+  //   for (uint16_t i = 0; i < 32768; i++)
+  //   {
+  //     espmega.fram.write8(i, 0);
+  //   }
+  //   esp_restart();
+  // }
   // // ------------ End Factory Reset Routine ------------
 
 
@@ -158,36 +180,35 @@ void setup()
   }
   // ------------ End Inputs and Outputs Initialization Routine ------------
   espmega.outputs.setState(12, true);
-  espmega.outputs.setValue(12,4095);
+  espmega.outputs.setValue(12, 4095);
   espmega.installCard(2, &climateCard_daikin);
   climateCard_daikin.bindFRAM(&espmega.fram, 5000);
   climateCard_daikin.loadStateFromFRAM();
   climateCard_daikin.setFRAMAutoSave(true);
   espmega.display->bindClimateCard(&climateCard_daikin);
 
-  // // Current Transformers
-  // espmega.installCard(4, &analogCard);
-
-  // espmega.installCard(5, &ct1);
-  // ct1.bindFRAM(&espmega.fram, 6000);
-  // espmega.iot->registerCard(5);
-
-  // espmega.installCard(6, &ct2);
-  // ct2.bindFRAM(&espmega.fram, 6100);
-  // espmega.iot->registerCard(6);
-
-  // espmega.installCard(7, &ct3);
-  // ct3.bindFRAM(&espmega.fram, 6200);
-  // espmega.iot->registerCard(7);
-  // espmega.installCard(8, &ct4);
-  // ct4.bindFRAM(&espmega.fram, 6300);
-  // espmega.iot->registerCard(8);
-  // espmega.installCard(9, &ct5);
-  // ct5.bindFRAM(&espmega.fram, 6400);
-  // espmega.iot->registerCard(9);
-  // espmega.installCard(10, &ct6);
-  // ct6.bindFRAM(&espmega.fram, 6500);
-  // espmega.iot->registerCard(10);
+// Current Transformers
+#ifdef ANALOG_ENABLE
+  espmega.installCard(4, &analogCard);
+  espmega.installCard(5, &ct1);
+  ct1.bindFRAM(&espmega.fram, 6000);
+  espmega.iot->registerCard(5);
+  espmega.installCard(6, &ct2);
+  ct2.bindFRAM(&espmega.fram, 6100);
+  espmega.iot->registerCard(6);
+  espmega.installCard(7, &ct3);
+  ct3.bindFRAM(&espmega.fram, 6200);
+  espmega.iot->registerCard(7);
+  espmega.installCard(8, &ct4);
+  ct4.bindFRAM(&espmega.fram, 6300);
+  espmega.iot->registerCard(8);
+  espmega.installCard(9, &ct5);
+  ct5.bindFRAM(&espmega.fram, 6400);
+  espmega.iot->registerCard(9);
+  espmega.installCard(10, &ct6);
+  ct6.bindFRAM(&espmega.fram, 6500);
+  espmega.iot->registerCard(10);
+#endif
 
   // ------------ Climate Cards Initialization Routine ------------
   ESP_LOGD("ISE OS", "Setting up climate cards");
@@ -203,47 +224,48 @@ void setup()
 
   // York Climate Card
   ESP_LOGD("ISE OS", "Installing york climate card");
-  espmega.installCard(10, &climateCard_york);
+  espmega.installCard(3, &climateCard_york);
   climateCard_york.bindFRAM(&espmega.fram, 5005);
   climateCard_york.loadStateFromFRAM();
   climateCard_york.setFRAMAutoSave(true);
   // ------------ End Climate Cards Initialization Routine ------------
   
   // ------------ Current Transformer Cards Initialization Routine ------------
-  //ESP_LOGD("ISE OS", "Installing current transformer cards");
+  #ifdef ANALOG_ENABLE
+  ESP_LOGD("ISE OS", "Installing current transformer cards");
   // First try to install the analog card
-  //analogCardAvailable = espmega.installCard(4, &analogCard);
+  analogCardAvailable = espmega.installCard(4, &analogCard);
   // If the analog card is available, install the current transformer cards
   // If the analog card is not available, current transformer cards will not be installed
   // Unless CT_FORCE_ENABLE is set to true
   // This is to prevent soft locking the device when the device tries to read from an ADC channel that does not exist
-  // if (analogCardAvailable || CT_FORCE_ENABLE)
-  // {
-  //   ESP_LOGV("ISE OS", "Analog card available, installing current transformer cards");
-  //   // espmega.installCard(5, &ct1);
-  //   // ct1.bindFRAM(&espmega.fram, 5010);
-  //   // espmega.installCard(6, &ct2);
-  //   // ct2.bindFRAM(&espmega.fram, 5020);
-  //   // espmega.installCard(7, &ct3);
-  //   // ct3.bindFRAM(&espmega.fram, 5030);
-  //   // espmega.installCard(8, &ct4);
-  //   // ct4.bindFRAM(&espmega.fram, 5040);
-  //   // espmega.installCard(9, &ct5);
-  //   // ct5.bindFRAM(&espmega.fram, 5050);
-  //   // espmega.installCard(10, &ct5);
-  //   // ct6.bindFRAM(&espmega.fram, 5060);
-  //   espmega.iot->registerCard(5);
-  //   espmega.iot->registerCard(6);
-  //   espmega.iot->registerCard(7);
-  //   espmega.iot->registerCard(8);
-  //   espmega.iot->registerCard(9);
-  //   espmega.iot->registerCard(10);
-  // }
-  // else
-  // {
-  //   ESP_LOGE("ISE OS", "Analog card not available, current transformer cards cannot and will not be installed.");
-  // }
-  //ESP_LOGD("ISE OS", "Registering Current Transformer Cards with IoT Module")
+  if (analogCardAvailable || CT_FORCE_ENABLE)
+  {
+    ESP_LOGV("ISE OS", "Analog card available, installing current transformer cards");
+    espmega.installCard(5, &ct1);
+    ct1.bindFRAM(&espmega.fram, 5010);
+    espmega.installCard(6, &ct2);
+    ct2.bindFRAM(&espmega.fram, 5020);
+    espmega.installCard(7, &ct3);
+    ct3.bindFRAM(&espmega.fram, 5030);
+    espmega.installCard(8, &ct4);
+    ct4.bindFRAM(&espmega.fram, 5040);
+    espmega.installCard(9, &ct5);
+    ct5.bindFRAM(&espmega.fram, 5050);
+    espmega.installCard(10, &ct5);
+    ct6.bindFRAM(&espmega.fram, 5060);
+    espmega.iot->registerCard(5);
+    espmega.iot->registerCard(6);
+    espmega.iot->registerCard(7);
+    espmega.iot->registerCard(8);
+    espmega.iot->registerCard(9);
+    espmega.iot->registerCard(10);
+  }
+  else
+  {
+    ESP_LOGE("ISE OS", "Analog card not available, current transformer cards cannot and will not be installed.");
+  }
+  #endif
   // ------------ End Current Transformer Cards Initialization Routine ------------
 
 
@@ -285,7 +307,7 @@ void setup()
   espmega.iot->registerCard(0);  // Register the Input Card
   espmega.iot->registerCard(1);  // Register the Output Card
   espmega.iot->registerCard(2);  // Register the Climate Card Daikin
-  espmega.iot->registerCard(10); // Register the Climate Card York
+  espmega.iot->registerCard(3); // Register the Climate Card York
   // ------------ End IoT Card Registration Routine ------------
 
 
@@ -293,6 +315,8 @@ void setup()
   auto bindedGetTime = std::bind(&ESPMegaPRO::getTime, &espmega);
   iseDisplay.begin(&espmega.inputs, &espmega.outputs, &climateCard_daikin, &climateCard_york, &pm_switch, &pm_fan_speed, &pm_lock, &ac_lock, espmega.iot);
   espmega.iot->registerRelativeMqttCallback(&handleMqttMessage);
+  iseDisplayOTA.begin("/isedisp", &iseDisplay, espmega.webServer);
+  internalDisplayOTA.begin("/intdisp", espmega.display, espmega.webServer);
   iseDisplay.registerPageChangeCallback(&handlePageChange);
   // ------------ End External Display Initialization Routine ------------
 }
@@ -321,6 +345,8 @@ void pmswitchupdatedisplay(char *value)
 {
   ESP_LOGI("PM switch", "getting PM switch state from MQTT: %d", pm_switch.getValue());
   iseDisplay.updateAirPurifierState();
+  iseDisplay.updateSystemtoggle();
+  iseDisplay.updateAllStandbyToggle();
   ESP_LOGI("PM switch", "toggling PM switch state from: %d to %d", pm_switch.getValue(), !pm_switch.getValue());
 }
 void pmlockupdatedisplay(char *value)
@@ -350,6 +376,28 @@ void loop()
     iseDisplay.updateDateTimeText(time);
     last_time_updated = millis();
   }
+#ifdef ANALOG_ENABLE
+  // Send out analog Data every 6 seconds
+  static uint32_t last_analog_sent = 0;
+  if (millis() - last_analog_sent > 6000)
+  {
+    espmega.iot->publish("/debug/up", "1");
+    if (analogCardAvailable || CT_FORCE_ENABLE)
+    {
+      espmega.iot->publish("/debug/log", "Sending Analog Card Data");
+      char topic_buffer[50];
+      char payload_buffer[50];
+      // Publish ADC Pin 0-7
+      for (uint8_t i = 0; i < 8; i++)
+      {
+        sprintf(topic_buffer, "/debug/analog/%d", i);
+        sprintf(payload_buffer, "%d", analogCard.analogRead(i));
+        espmega.iot->publish(topic_buffer, payload_buffer);
+      }
+    }
+    last_analog_sent = millis();
+  }
+#endif
 }
 
 void on_pin_change(uint8_t pin, uint8_t value)
@@ -486,6 +534,7 @@ void handlePageChange(uint8_t page)
   case PAGE_STANDBY:
     iseDisplay.updateLightGroupStatePageStandby();
     iseDisplay.updateAirPurifierStateStandby();
+    iseDisplay.updateAllStandbyToggle();
     break;
   case PAGE_DASHBOARD:
     iseDisplay.updateLightGroupStatePageDashboard();

src/main.hpp

@@ -5,6 +5,7 @@ SET_LOOP_TASK_STACK_SIZE(32*1024);
 #include <ir_codes_daikin.hpp>
 #include <ir_codes_york.hpp>
 #include <CurrentTransformerCard.hpp>
+#include <ESPMegaDisplayOTA.hpp>
 
 
 
@@ -25,16 +26,16 @@ SET_LOOP_TASK_STACK_SIZE(32*1024);
 #define AIR_CONDITIONER_YORK_IR_PIN 15
 #define AIR_CONDITIONER_RMT_CHANNEL0 RMT_CHANNEL_0
 #define AIR_CONDITIONER_RMT_CHANNEL1 RMT_CHANNEL_1
-
-// // CT Configuration
-// #define CT_FORCE_ENABLE false
-// #define CT_RMS_VOLTAGE 1.0
-// #define CT_PIN_LIGHT_PHASE1 0
-// #define CT_PIN_LIGHT_PHASE2 1
-// #define CT_PIN_SOCKET 2
-// #define CT_PIN_AC_PHASE1 3
-// #define CT_PIN_AC_PHASE2 4
-// #define CT_PIN_AC_PHASE3 5
+// CT Configuration
+#define ANALOG_ENABLE
+#define CT_FORCE_ENABLE true
+#define CT_RMS_VOLTAGE 220.0
+#define CT_PIN_LIGHT_PHASE1 0
+#define CT_PIN_LIGHT_PHASE2 1
+#define CT_PIN_SOCKET 2
+#define CT_PIN_AC_PHASE1 3
+#define CT_PIN_AC_PHASE2 4
+#define CT_PIN_AC_PHASE3 5
 
 void handleMqttMessage(char *topic, char *payload);
 void subscribeToMqttTopics();