fix energy double loading

.gitignore

@@ -3,3 +3,5 @@
 .vscode/c_cpp_properties.json
 .vscode/launch.json
 .vscode/ipch
+/.vscode
+/.vscode

platformio.ini

@@ -12,6 +12,6 @@
 platform = espressif32
 board = wt32-eth01
 framework = arduino
-lib_deps = siwats/ESPMegaPROR3@^2.9.0
+lib_deps = siwats/ESPMegaPROR3@^2.9.4
 monitor_speed = 115200
-build_flags = -DCORE_DEBUG_LEVEL=0 -DSW_VERSION='"ise-final-1.0"' -DBOARD_MODEL='"ESPMegaPRO R3.3b"'
+build_flags = -DCORE_DEBUG_LEVEL=0 -DSW_VERSION='"ise-final-1.3"' -DBOARD_MODEL='"ESPMegaPRO R3.3b"'

src/ise_display.cpp

@@ -535,6 +535,13 @@ void ISEDisplay::updatePMinside(u_int16_t pm25_inside)
 
 void ISEDisplay::setPMstate(bool is_pm_on, uint8_t pm_fan_speed)
 {
+    //check pm_lock if true do nothing
+    this->pm_lock_state = strcmp(pm_lock->getValue(), "on") == 0;
+    if (this->pm_lock_state == true)
+    {
+        ESP_LOGI("ISEDisplay", "PM lock is on, do nothing");
+        return;
+    }
     ESP_LOGI("ISEDisplay", "Setting PM state: %d, fan speed: %d", is_pm_on, pm_fan_speed);
     char buffer[4];
     itoa(pm_fan_speed, buffer, DEC);
@@ -562,6 +569,13 @@ void ISEDisplay::setACstate(uint8_t ac_fan_speed, uint8_t ac_mode, uint8_t ac_te
     this->ac_fan_speed = ac_fan_speed;
     this->ac_mode = ac_mode;
     this->ac_temperature = ac_temperature;
+    //check ac_lock if true do nothing
+    this->ac_lock_state = strcmp(ac_lock->getValue(), "on") == 0;
+    if (this->ac_lock_state == true)
+    {
+        ESP_LOGI("ISEDisplay", "AC lock is on, do nothing");
+        return;
+    }
     // check ac_temp is within bound of daikin
     if (this->ac_temperature < DAIKIN_MIN_TEMP)
     {
@@ -1174,13 +1188,18 @@ void ISEDisplay::toggleSystem()
     bool state = calculateAllState();
     if (state)
     {
-        setACstate(0, ac_fan_speed, ac_temperature);
+        //if AC mode is not zero, toggleAC()
+        if(ac_mode != 0) {
+            toggleAC();
+        }
         setLightGroupState(0);
         setPMstate(false, pm_fan_speed);
     }
     else
     {
-        setACstate(2, ac_fan_speed, ac_temperature);
+        if(ac_mode == 0) {
+            toggleAC();
+        }
         setLightGroupState(3);
         setPMstate(true, pm_fan_speed);
     }

src/main.cpp

@@ -129,7 +129,7 @@ void setup()
   // set debounce time to 500 for pin 0-11
   for (uint16_t i = 0; i < 16; i++)
   {
-    espmega.inputs.setDebounceTime(i, 1000);
+    espmega.inputs.setDebounceTime(i, 75);
   } 
 
   // ------------ IoT Module Initialization Routine ------------
@@ -172,33 +172,10 @@ void setup()
   climateCard_daikin.setFRAMAutoSave(true);
   espmega.display->bindClimateCard(&climateCard_daikin);
 
-// Current Transformers
-#ifdef ANALOG_ENABLE
-  espmega.installCard(4, &analogCard);
-  espmega.installCard(5, &ct1);
-  ct1.bindFRAM(&espmega.fram, 6000);
-  espmega.iot->registerCard(5);
-  espmega.installCard(6, &ct2);
-  ct2.bindFRAM(&espmega.fram, 6100);
-  espmega.iot->registerCard(6);
-  espmega.installCard(7, &ct3);
-  ct3.bindFRAM(&espmega.fram, 6200);
-  espmega.iot->registerCard(7);
-  espmega.installCard(8, &ct4);
-  ct4.bindFRAM(&espmega.fram, 6300);
-  espmega.iot->registerCard(8);
-  espmega.installCard(9, &ct5);
-  ct5.bindFRAM(&espmega.fram, 6400);
-  espmega.iot->registerCard(9);
-  espmega.installCard(10, &ct6);
-  ct6.bindFRAM(&espmega.fram, 6500);
-  espmega.iot->registerCard(10);
-#endif
-
 // Input callbacks
 // pre-load the input buffers
   ESP_LOGV("ISE IoT OS", "Pre-loading input buffers");
-  espmega.inputs.loop();
+  espmega.inputs.preloadInputBuffer();
 
   // ------------ Climate Cards Initialization Routine ------------
   ESP_LOGD("ISE OS", "Setting up climate cards");
@@ -234,16 +211,28 @@ void setup()
     ESP_LOGV("ISE OS", "Analog card available, installing current transformer cards");
     espmega.installCard(5, &ct1);
     ct1.bindFRAM(&espmega.fram, 5010);
+    ct1.loadEnergy();
+    ct1.setEnergyAutoSave(true);
     espmega.installCard(6, &ct2);
     ct2.bindFRAM(&espmega.fram, 5020);
+    ct2.loadEnergy();
+    ct2.setEnergyAutoSave(true);
     espmega.installCard(7, &ct3);
     ct3.bindFRAM(&espmega.fram, 5030);
+    ct3.loadEnergy();
+    ct3.setEnergyAutoSave(true);
     espmega.installCard(8, &ct4);
     ct4.bindFRAM(&espmega.fram, 5040);
+    ct4.loadEnergy();
+    ct4.setEnergyAutoSave(true);
     espmega.installCard(9, &ct5);
     ct5.bindFRAM(&espmega.fram, 5050);
+    ct5.loadEnergy();
+    ct5.setEnergyAutoSave(true);
     espmega.installCard(10, &ct5);
     ct6.bindFRAM(&espmega.fram, 5060);
+    ct6.loadEnergy();
+    ct6.setEnergyAutoSave(true);
     espmega.iot->registerCard(5);
     espmega.iot->registerCard(6);
     espmega.iot->registerCard(7);