ise-senior-iot/ise-iot-oop-v2
2
0
Fork 0
Code Pull requests Activity

remove reference to CUD

Browse source
This commit is contained in:
reaw55 2024-01-31 00:32:57 +07:00
parent e5ecd5f3a0
commit 70f6ae0092
3 changed files with 30 additions and 79 deletions
Download patch file Download diff file Expand all files Collapse all files

85
src/main.cpp
View file

@ -1,25 +1,5 @@
#include <main.hpp>
#include <cud_display.hpp>
#include <ise_display.hpp>
/***********************************************
* Begin Configuration *
************************************************/
// Display Configuration
#define cudDisplayAdapter Serial2
#define CUD_DISPLAY_BAUD_RATE 115200
#define CUD_DISPLAY_TX_PIN 4
#define CUD_DISPLAY_RX_PIN 17
// Air Conditioner Configuration
#define AIR_CONDITIONER_LOCK_FRAM_ADDRESS 4900
#define AIR_CONDITIONER_LOCK_RELATIVE_TOPIC "ac_lock"
#define AIR_CONDITIONER_LOCK_SET_RELATIVE_TOPIC "ac_lock/set"
#define AIR_CONDITIONER_SENSOR_TYPE AC_SENSOR_TYPE_DHT22
#define AIR_CONDITIONER_SENSOR_PIN 32
#define AIR_CONDITIONER_IR_PIN 5
#define AIR_CONDITIONER_RMT_CHANNEL RMT_CHANNEL_0
const char *mode_names[] = {"off", "fan_only", "cool"};
const char *fan_speed_names[] = {"auto", "high", "medium", "low"};
@ -32,14 +12,12 @@ AirConditioner ac = {
.fan_speeds = 4,
.fan_speed_names = fan_speed_names,
.getInfraredCode = &getInfraredCode};
/***********************************************
* End Configuration *
***********************************************/
ESPMegaPRO espmega = ESPMegaPRO();
CUDDisplay cudDisplay = CUDDisplay(&cudDisplayAdapter);
ISEDisplay iseDisplay = ISEDisplay(&cudDisplayAdapter);
ISEDisplay iseDisplay = ISEDisplay(&iseDisplayAdapter);
ClimateCard climateCard = ClimateCard(AIR_CONDITIONER_IR_PIN, ac,
AIR_CONDITIONER_SENSOR_TYPE, AIR_CONDITIONER_SENSOR_PIN,
@ -47,38 +25,7 @@ ClimateCard climateCard = ClimateCard(AIR_CONDITIONER_IR_PIN, ac,
void handleMqttMessage(char *topic, char *payload)
{
char *temperature = (char*)calloc(16,sizeof(char));
strcpy(temperature, payload);
int temp_int;
temp_int = atoi(temperature);
Serial.printf("MQTT Message: %s %s\n", topic, payload);
if (!strcmp(topic, AIR_CONDITIONER_LOCK_SET_RELATIVE_TOPIC))
{
if (!strcmp(payload, "lock"))
{
lockAC();
espmega.iot->publishRelative(AIR_CONDITIONER_LOCK_RELATIVE_TOPIC, "lock");
}
else if (!strcmp(payload, "unlock"))
{
unlockAC();
espmega.iot->publishRelative(AIR_CONDITIONER_LOCK_RELATIVE_TOPIC, "unlock");
}
}
free(temperature);
}
void lockAC()
{
espmega.fram.write8(AIR_CONDITIONER_LOCK_FRAM_ADDRESS, 0);
cudDisplay.setACControlEnabled(false);
}
void unlockAC()
{
espmega.fram.write8(AIR_CONDITIONER_LOCK_FRAM_ADDRESS, 1);
cudDisplay.setACControlEnabled(true);
}
void sendStopBytes()
@ -90,9 +37,9 @@ void sendStopBytes()
void sendExtStopBytes()
{
cudDisplayAdapter.write(0xFF);
cudDisplayAdapter.write(0xFF);
cudDisplayAdapter.write(0xFF);
iseDisplayAdapter.write(0xFF);
iseDisplayAdapter.write(0xFF);
iseDisplayAdapter.write(0xFF);
}
void setup()
@ -105,9 +52,9 @@ void setup()
// If GPIO 2 is pulled low, clear the FRAM then reboot (Reset the device to factory defaults)
bool clear_fram = !gpio_get_level(GPIO_NUM_2);
Serial.begin(115200);
cudDisplayAdapter.begin(CUD_DISPLAY_BAUD_RATE, SERIAL_8N1, CUD_DISPLAY_RX_PIN, CUD_DISPLAY_TX_PIN);
iseDisplayAdapter.begin(ISE_DISPLAY_BAUD_RATE, SERIAL_8N1, ISE_DISPLAY_RX_PIN, ISE_DISPLAY_TX_PIN);
sendExtStopBytes();
cudDisplayAdapter.print("rest");
iseDisplayAdapter.print("rest");
sendExtStopBytes();
sendStopBytes();
Serial.print("rest");
@ -152,24 +99,13 @@ void setup()
espmega.iot->registerCard(1); // Register the Output Card
espmega.iot->registerCard(2); // Register the Climate Card
auto bindedGetTime = std::bind(&ESPMegaPRO::getTime, &espmega);
cudDisplay.begin(bindedGetTime, &espmega.inputs, &espmega.outputs, &climateCard);
if (espmega.fram.read8(AIR_CONDITIONER_LOCK_FRAM_ADDRESS))
{
lockAC();
}
else
{
// AC is unlocked
unlockAC();
}
espmega.iot->subscribeRelative(AIR_CONDITIONER_LOCK_SET_RELATIVE_TOPIC);
iseDisplay.begin(&espmega.inputs, &espmega.outputs, &climateCard);
espmega.iot->registerRelativeMqttCallback(&handleMqttMessage);
}
void loop()
{
espmega.loop();
cudDisplay.loop();
iseDisplay.loop();
// Update the time every 15 seconds
@ -184,10 +120,5 @@ void loop()
void on_pin_change(uint8_t pin, uint8_t value)
{
// For pin 0-6, when the pin value changes, toggle the corresponding PWM pin
if (pin < 7)
{
bool new_value = !espmega.outputs.getState(pin);
espmega.outputs.digitalWrite(pin, new_value);
}
}