src/espmega_iot_core.cpp

@@ -2,10 +2,7 @@
 
 // OS Configuration
 // #define FASTBOOT
-
-#ifndef ESPMEGA_REV
 #define ESPMEGA_REV "ESPMega PRO R3.3b"
-#endif
 
 // Network Connectivity
 char HOSTNAME[15];
@@ -15,9 +12,7 @@ IPAddress GATEWAY(0, 0, 0, 0);
 IPAddress DNS(0, 0, 0, 0);
 IPAddress MQTT_SERVER(0, 0, 0, 0);
 uint16_t MQTT_PORT = 0;
-#ifdef ENABLE_WEBUI
 WebServer otaserver(80);
-#endif
 bool standalone = true;
 // #define MQTT_BASE_TOPIC "/espmega/ProR3"
 char MQTT_BASE_TOPIC[20];
@@ -27,10 +22,8 @@ bool MQTT_USE_AUTH = false;
 char MQTT_USERNAME[32];
 char MQTT_PASSWORD[32];
 uint8_t utc_offset = 7;
-#ifdef ENABLE_CLIMATE_MODULE
 float current_room_temp = 0;
 float current_room_humid = 0;
-#endif
 
 // Inputs
 #define VINT_COUNT 16
@@ -54,19 +47,16 @@ const int PWM_CYCLE_VALUES[PWM_CYCLE_VALUES_COUNT] = {50, 125, 255};
 char PWM_SET_STATE_TOPIC[70];
 char PWM_SET_VALUE_TOPIC[70];
 
-#ifdef ENABLE_INTERNAL_LCD
 // LCD
 int lcd_current_page = 1;
 int lcd_pwmAdj_id = 0;
 EasyNex panel(Serial);
-#endif
 
 // Air Conditioner Control
 /*
 Mode 0: Off, 1: Cool, 2: Fan
 Fan Speed 0: Auto, 1: High, 2: Mid, 3: Low
 */
-#ifdef ENABLE_CLIMATE_MODULE
 #define DHT22_PIN 32
 uint8_t ac_mode = 0;
 uint8_t ac_fan_speed = 0;
@@ -79,7 +69,6 @@ char AC_FAN_TOPIC[75];
 char AC_TEMPERATURE_TOPIC[75];
 char AC_ROOM_TEMPERATURE_TOPIC[75];
 char AC_HUMIDITY_TOPIC[75];
-#endif
 
 // EEPROM ADDRESS
 #define EEPROM_ADDRESS_AC_MODE 0         // 01bytes
@@ -107,9 +96,7 @@ WiFiClient eth;
 PubSubClient mqtt_client(MQTT_SERVER, 1883, eth);
 PubSubClientTools mqtt(mqtt_client);
 
-#ifdef ENABLE_CLIMATE_MODULE
 DHTNEW env_sensor(DHT22_PIN);
-#endif
 
 Thread mqtt_reconnector = Thread();
 Thread environment_reporter = Thread();
@@ -117,11 +104,9 @@ Thread eeprom_pwm_updater = Thread();
 Thread user_timer_tick = Thread();
 StaticThreadController<4> thread_controller(&mqtt_reconnector, &environment_reporter, &eeprom_pwm_updater, &user_timer_tick);
 
-#ifdef ENABLE_INTERNAL_LCD
 Thread top_bar_updater = Thread();
 Thread page_updater = Thread();
 StaticThreadController<2> lcd_thread_controller(&top_bar_updater, &page_updater);
-#endif
 
 void setup()
 {
@@ -129,19 +114,15 @@ void setup()
 #ifdef ENABLE_EXTERNAL_LCD
   Serial2.begin(115200, SERIAL_8N1, RXD2, TXD2);
 #endif
-#ifdef ENABLE_INTERNAL_LCD
   panel.begin(115200);
-#endif
   Serial.println("ESPMega R3 Initializing");
   ESPMega_begin();
   io_begin();
   eeprom_retrieve_init();
   user_pre_init();
-#ifdef ENABLE_INTERNAL_LCD
   lcd_send_stop_bit();
   lcd_init();
   lcd_begin();
-#endif
   check_boot_reset();
 #ifdef ENABLE_EXTERNAL_LCD
   Serial2.print("rest");
@@ -151,11 +132,9 @@ void setup()
 #endif
   lcd_send_command("boot_state.txt=\"Core Initializing . . .\"");
   Serial.println("Initializing Infrared . . .");
-#ifdef ENABLE_IR_MODULE
   lcd_send_command("boot_state.txt=\"Infrared Initializing . . .\"");
   IrReceiver.begin(IR_RECIEVE_PIN);
   IrSender.begin(IR_SEND_PIN);
-#endif
   lcd_send_command("boot_state.txt=\"Network Initializing . . .\"");
   network_begin();
   lcd_send_command("boot_state.txt=\"IoT Core Initializing . . .\"");
@@ -164,9 +143,7 @@ void setup()
   mqtt_connect();
   lcd_send_command("boot_state.txt=\"Threads Initializing . . .\"");
   thread_initialization();
-#ifdef ENABLE_WEBUI
   ota_begin();
-#endif
   Serial.println("Initialization Completed.");
   Serial.println("Jumping to User Code.");
   user_init();
@@ -178,29 +155,20 @@ void loop()
   virtual_interrupt_loop();
   mqtt_client.loop();
   ESPMega_loop();
-#ifdef ENABLE_IR_MODULE
   ir_loop();
-#endif
   thread_controller.run();
-#ifdef ENABLE_INTERNAL_LCD
   lcd_loop();
-#endif
   user_loop();
-#ifdef ENABLE_WEBUI
   otaserver.handleClient();
-#endif
 }
 
 void eeprom_retrieve_init()
 {
-// EEPROM Data Retrival
-#ifdef ENABLE_CLIMATE_MODULE
+  // EEPROM Data Retrival
   ac_mode = ESPMega_FRAM.read8(EEPROM_ADDRESS_AC_MODE);
   ac_temperature = ESPMega_FRAM.read8(EEPROM_ADDRESS_AC_TEMPERATURE);
   ac_fan_speed = ESPMega_FRAM.read8(EEPROM_ADDRESS_AC_FAN_SPEED);
-#endif
-// EEPROM Data Retrival Validation
-#ifdef ENABLE_CLIMATE_MODULE
+  // EEPROM Data Retrival Validation
   if (ac_mode > 2)
   {
     ac_mode = 0;
@@ -217,7 +185,6 @@ void eeprom_retrieve_init()
     ESPMega_FRAM.write8(EEPROM_ADDRESS_AC_TEMPERATURE, ac_fan_speed);
   }
   ac_set_state(ac_mode, ac_temperature, ac_fan_speed);
-#endif
   ESPMega_FRAM.read(EEPROM_ADDRESS_PWM_STATE, pwm_states_eeprom, 16);
   memcpy(pwm_states, pwm_states_eeprom, 16);
   ESPMega_FRAM.read(EEPROM_ADDRESS_PWM_VALUE, pwm_values_eeprom, 32);
@@ -252,7 +219,6 @@ void eeprom_retrieve_init()
   strcat(PWM_SET_STATE_TOPIC, "/pwm/00/set/state");
   memcpy(PWM_SET_VALUE_TOPIC, MQTT_BASE_TOPIC, 20);
   strcat(PWM_SET_VALUE_TOPIC, "/pwm/00/set/value");
-#ifdef ENABLE_CLIMATE_MODULE
   memcpy(AC_SET_MODE_TOPIC, MQTT_BASE_TOPIC, 20);
   strcat(AC_SET_MODE_TOPIC, "/ac/set/mode");
   memcpy(AC_SET_FAN_TOPIC, MQTT_BASE_TOPIC, 20);
@@ -269,7 +235,6 @@ void eeprom_retrieve_init()
   strcat(AC_ROOM_TEMPERATURE_TOPIC, "/ac/room_temperature");
   memcpy(AC_HUMIDITY_TOPIC, MQTT_BASE_TOPIC, 20);
   strcat(AC_HUMIDITY_TOPIC, "/ac/humidity");
-#endif
   memcpy(PWM_STATE_TOPIC, MQTT_BASE_TOPIC, 20);
   strcat(PWM_STATE_TOPIC, "/pwm/00/state");
   memcpy(PWM_VALUE_TOPIC, MQTT_BASE_TOPIC, 20);
@@ -278,7 +243,6 @@ void eeprom_retrieve_init()
   strcat(INPUTS_TOPIC, "/input/00");
 }
 
-#ifdef ENABLE_WEBUI
 void ota_begin()
 {
   otaserver.on("/", HTTP_GET, []()
@@ -355,7 +319,9 @@ void ota_begin()
       set_mqtt_useauth(use_auth);
       otaserver.send(200, "text/html", configbuffer); 
       delay(500);
-      ESP.restart(); });
+      ESP.restart();
+      });
+      
 
   otaserver.on(
       "/update", HTTP_POST, []()
@@ -372,16 +338,12 @@ void ota_begin()
           Serial.println(upload.currentSize);
 
           String otafiletxt = "Downloading File : " + upload.filename;
-#ifdef ENABLE_INTERNAL_LCD
           lcd_send_stop_bit();
           panel.writeStr("otatxt.txt", otafiletxt);
-#endif
           Serial.printf("Update: %s\n", upload.filename.c_str());
           if (!Update.begin(UPDATE_SIZE_UNKNOWN))
           {
-#ifdef ENABLE_INTERNAL_LCD
             panel.writeStr("otatxt.txt", "Update Failed, Rebooting . . .");
-#endif
             Update.printError(Serial);
           }
         }
@@ -389,9 +351,7 @@ void ota_begin()
         {
           if (Update.write(upload.buf, upload.currentSize) != upload.currentSize)
           {
-#ifdef ENABLE_INTERNAL_LCD
             panel.writeStr("otatxt.txt", "Update Failed, Rebooting . . .");
-#endif
             Update.printError(Serial);
           }
           if (upload.currentSize != 0 && upload.totalSize != 0)
@@ -400,41 +360,32 @@ void ota_begin()
             uint32_t totalsize_kb = upload.totalSize / 1000;
             uint32_t upload_pct = 100 * upload.totalSize / 1000000;
             String otafiletxt = "Downloading File : " + upload.filename + " (" + String(totalsize_kb) + "KB)";
-#ifdef ENABLE_INTERNAL_LCD
             panel.writeNum("prog.val", upload_pct);
             panel.writeStr("otatxt.txt", otafiletxt);
-#endif
           }
         }
         else if (upload.status == UPLOAD_FILE_END)
         {
           if (Update.end(true))
           {
-#ifdef ENABLE_INTERNAL_LCD
             panel.writeStr("otatxt.txt", "Update Completed, Rebooting . . .");
-#endif
             Serial.printf("Update Success: %u\nRebooting...\n", upload.totalSize);
           }
           else
           {
-#ifdef ENABLE_INTERNAL_LCD
             panel.writeStr("otatxt.txt", "Update Failed, Rebooting . . .");
-#endif
             Update.printError(Serial);
           }
         }
       });
   otaserver.begin();
 }
-#endif
 
 void io_begin()
 {
   Serial.println("Initializing I/O . . .");
-#ifdef ENABLE_IR_MODULE
   pinMode(IR_RECIEVE_PIN, INPUT_PULLUP);
   pinMode(IR_SEND_PIN, OUTPUT);
-#endif
 }
 
 void network_begin()
@@ -480,9 +431,7 @@ void mqtt_connect()
       lcd_send_stop_bit();
       publish_pwm_states();
       publish_input_states();
-#ifdef ENABLE_CLIMATE_MODULE
       publish_ac_state();
-#endif
       mqtt_connected_user_callback();
       standalone = false;
       ESPMega_updateTimeFromNTP();
@@ -494,10 +443,8 @@ void mqtt_connect()
       lcd_send_stop_bit();
     }
     lcd_send_stop_bit();
-#ifdef ENABLE_INTERNAL_LCD
     lcd_refresh();
     lcd_top_bar_update();
-#endif
   }
 }
 
@@ -512,11 +459,9 @@ void mqtt_subscribe()
     mqtt.subscribe(PWM_SET_STATE_TOPIC, pwm_state_callback);
     mqtt.subscribe(PWM_SET_VALUE_TOPIC, pwm_value_callback);
   }
-#ifdef ENABLE_CLIMATE_MODULE
   mqtt.subscribe(AC_SET_FAN_TOPIC, ac_state_callback);
   mqtt.subscribe(AC_SET_TEMPERATURE_TOPIC, ac_state_callback);
   mqtt.subscribe(AC_SET_MODE_TOPIC, ac_state_callback);
-#endif
   mqtt.subscribe(STATE_REQUEST_TOPIC, state_request_callback);
 }
 
@@ -526,10 +471,8 @@ void thread_initialization()
   Serial.println("Initializing MQTT Thread . . .");
   mqtt_reconnector.onRun(mqtt_connect);
   mqtt_reconnector.setInterval(15000);
-#ifdef ENABLE_CLIMATE_MODULE
   environment_reporter.onRun(publish_env_state);
   environment_reporter.setInterval(5000);
-#endif
   eeprom_pwm_updater.onRun(eeprom_pwm_update);
   eeprom_pwm_updater.setInterval(1000);
   user_timer_tick.onRun(timer_tick_callback);
@@ -564,10 +507,9 @@ void virtual_interrupt_callback(int pin, int state)
 {
 
   publish_input_state(pin, state);
-#ifdef ENABLE_INTERNAL_LCD
+  // Serial.printf("Pin %d changed to %d\n", pin, state);
   if (lcd_current_page == 2)
     panel.writeNum("I" + String(pin) + ".val", state);
-#endif
   virtual_interrupt_user_callback(pin, state);
 }
 
@@ -626,12 +568,10 @@ void pwm_set_state(int id, int state)
     pwm_states[id] = state;
     int pwm_value = pwm_values[id];
     ESPMega_analogWrite(pwm_pins[id], state * (int)(pwm_linear_scaling_m[id] * pwm_value + pwm_linear_scaling_c[id]));
-#ifdef ENABLE_INTERNAL_LCD
     if (lcd_current_page == 3)
       panel.writeNum("j" + String(id) + ".ppic", pwm_states[id] ? 33 : 48);
     else if (lcd_current_page == 5 && id == lcd_pwmAdj_id)
       panel.writeStr("pwm_state.txt", pwm_states[lcd_pwmAdj_id] ? "ON" : "OFF");
-#endif
     publish_pwm_state(id);
     pwm_changed_user_callback(id);
   }
@@ -642,12 +582,10 @@ void pwm_set_value(int id, int value)
   pwm_values[id] = value;
   int pwm_state = pwm_states[id];
   ESPMega_analogWrite(pwm_pins[id], pwm_state * (int)(pwm_linear_scaling_m[id] * value + pwm_linear_scaling_c[id]));
-#ifdef ENABLE_INTERNAL_LCD
   if (lcd_current_page == 3)
     panel.writeNum("j" + String(id) + ".val", int(value / 4095.0 * 100.0));
   else if (lcd_current_page == 5 && id == lcd_pwmAdj_id)
     panel.writeNum("pwm_value.val", pwm_values[lcd_pwmAdj_id]);
-#endif
   publish_pwm_state(id);
   pwm_changed_user_callback(id);
 }
@@ -730,23 +668,22 @@ void state_request_callback(String topic, String message)
 {
   publish_input_states();
   publish_pwm_states();
-#ifdef ENABLE_CLIMATE_MODULE
   publish_ac_state();
-#endif
   user_state_request_callback();
 }
 
-#ifdef ENABLE_IR_MODULE
 void ir_loop()
 {
   if (IrReceiver.decode())
   {
+    // Serial.println();
+    // IrReceiver.compensateAndPrintIRResultAsCArray(&Serial, false);
+    // Serial.println();
+    // Serial.println();
     IrReceiver.resume();
   }
 }
-#endif
 
-#ifdef ENABLE_CLIMATE_MODULE
 void publish_ac_state()
 {
   String temp = "";
@@ -839,7 +776,7 @@ void ac_set_state(int mode, int temperature, int fan_speed)
     ac_temperature = AC_MAX_TEMPERATURE;
   ac_fan_speed = fan_speed;
   temperature -= AC_MIN_TEMPERATURE;
-#ifdef ENABLE_INTERNAL_LCD
+
   if (lcd_current_page == 4)
   {
     lcd_ac_refresh_fan();
@@ -849,7 +786,6 @@ void ac_set_state(int mode, int temperature, int fan_speed)
     else
       panel.writeStr("temp.txt", "--C");
   }
-#endif
   publish_ac_state();
   uint8_t ac_datablock[3] = {ac_mode, ac_temperature, ac_fan_speed};
   ESPMega_FRAM.write(0, ac_datablock, 3);
@@ -881,7 +817,6 @@ void publish_env_state()
     mqtt_client.loop();
     mqtt.publish(String(AC_HUMIDITY_TOPIC), String(current_room_humid));
     mqtt_client.loop();
-#ifdef ENABLE_INTERNAL_LCD
     if (lcd_current_page == 4)
     {
       Serial.printf("roomtemp.txt=\"%.01fC\"", current_room_temp);
@@ -889,7 +824,6 @@ void publish_env_state()
       Serial.printf("roomhumid.txt=\"%d%%\"", (int)current_room_humid);
       lcd_send_stop_bit();
     }
-#endif
     break;
   default:
     mqtt.publish(String(AC_ROOM_TEMPERATURE_TOPIC), "ERROR");
@@ -898,9 +832,7 @@ void publish_env_state()
     mqtt_client.loop();
   }
 }
-#endif
 
-#ifdef ENABLE_INTERNAL_LCD
 void lcd_begin()
 {
   top_bar_updater.onRun(lcd_top_bar_update);
@@ -954,7 +886,6 @@ void lcd_refresh()
     }
     break;
   case 4:
-#ifdef ENABLE_CLIMATE_MODULE
     Serial.printf("roomtemp.txt=\"%.01fC\"", current_room_temp);
     lcd_send_stop_bit();
     Serial.printf("roomhumid.txt=\"%d%%\"", (int)current_room_humid);
@@ -965,9 +896,6 @@ void lcd_refresh()
       panel.writeStr("temp.txt", "--C");
     lcd_ac_refresh_fan();
     lcd_ac_refresh_mode();
-#else
-    lcd_send_command("page climate_nomod");
-#endif
   case 5:
     panel.writeStr("pwm_id.txt", String("P") + String(lcd_pwmAdj_id));
     panel.writeStr("pwm_state.txt", pwm_states[lcd_pwmAdj_id] ? "ON" : "OFF");
@@ -1001,7 +929,7 @@ void lcd_top_bar_update()
   panel.writeNum("server.pic", standalone ? 4 : 5);
   panel.writeNum("lan.pic", ETH.linkUp() ? 3 : 2);
 }
-#ifdef ENABLE_CLIMATE_MODULE
+
 void lcd_ac_refresh_mode()
 {
   // auto high mid low
@@ -1017,7 +945,6 @@ void lcd_ac_refresh_fan()
   panel.writeNum("fan_mid.pic", ac_fan_speed == 2 ? 20 : 21);
   panel.writeNum("fan_high.pic", ac_fan_speed == 1 ? 16 : 17);
 }
-#endif
 
 void trigger0()
 {
@@ -1048,70 +975,54 @@ void trigger3()
   lcd_send_stop_bit();
   pwm_set_value(lcd_pwmAdj_id, value);
 }
+
 void trigger4()
 {
-#ifdef ENABLE_CLIMATE_MODULE
   if (ac_temperature < AC_MAX_TEMPERATURE && ac_mode != 2)
     ac_set_state(ac_mode, ac_temperature + 1, ac_fan_speed);
-#endif
 }
 
 void trigger5()
 {
-#ifdef ENABLE_CLIMATE_MODULE
   if (ac_temperature > AC_MIN_TEMPERATURE && ac_mode != 2)
     ac_set_state(ac_mode, ac_temperature - 1, ac_fan_speed);
-#endif
 }
 
 void trigger6()
 {
-#ifdef ENABLE_CLIMATE_MODULE
   ac_set_state(ac_mode, ac_temperature, 0);
-#endif
 }
 
 void trigger7()
 {
-#ifdef ENABLE_CLIMATE_MODULE
   ac_set_state(ac_mode, ac_temperature, 3);
-#endif
 }
 
 void trigger8()
 {
-#ifdef ENABLE_CLIMATE_MODULE
   ac_set_state(ac_mode, ac_temperature, 2);
-#endif
 }
 
 void trigger9()
 {
-#ifdef ENABLE_CLIMATE_MODULE
   ac_set_state(ac_mode, ac_temperature, 1);
-#endif
 }
 
 void trigger10()
 {
-#ifdef ENABLE_CLIMATE_MODULE
   ac_set_state(1, ac_temperature, ac_fan_speed);
-#endif
 }
 
 void trigger11()
 {
-#ifdef ENABLE_CLIMATE_MODULE
   ac_set_state(2, ac_temperature, ac_fan_speed);
-#endif
 }
 
 void trigger12()
 {
-#ifdef ENABLE_CLIMATE_MODULE
   ac_set_state(0, ac_temperature, ac_fan_speed);
-#endif
 }
+
 void trigger13()
 {
   set_ip(panel.readStr("ip_set.txt"));
@@ -1141,7 +1052,6 @@ void trigger15()
   delay(100);
   ESP.restart();
 }
-#endif // End Internal LCD Code Block
 
 void eeprom_pwm_update()
 {
@@ -1246,7 +1156,6 @@ boolean input_get_state(int id)
   return virtual_interupt_state[id];
 }
 
-#ifdef ENABLE_CLIMATE_MODULE
 uint8_t ac_get_temperature()
 {
   return ac_temperature;
@@ -1259,7 +1168,6 @@ uint8_t ac_get_fan_speed()
 {
   return ac_fan_speed;
 }
-#endif
 
 void eeprom_mqtt_username_retrieve()
 {
@@ -1289,47 +1197,34 @@ void set_mqtt_useauth(bool use_auth)
   ESPMega_FRAM.write8(EEPROM_ADDRESS_MQTT_USEAUTH, MQTT_USE_AUTH);
 }
 
-void factory_reset()
-{
-  for (int i = 5; i > 0; i--)
-  {
-    if (digitalRead(2) == HIGH)
-    {
+void factory_reset() {
+  for(int i=5;i>0;i--) {
+    if(digitalRead(2)==HIGH) {
       lcd_send_command("boot_state.txt=\"Factory Reset Canceled, Restarting\"");
       delay(5000);
       ESP.restart();
     }
-#ifdef ENABLE_INTERNAL_LCD
-    Serial.printf("boot_state.txt=\"Factory Reset in %d\"", i);
+    Serial.printf("boot_state.txt=\"Factory Reset in %d\"",i);
     lcd_send_stop_bit();
-#endif
     delay(1000);
   } 
-#ifdef ENABLE_INTERNAL_LCD
   lcd_send_command("boot_state.txt=\"Factory Reseting . . .\"");
-#endif
   // Format FRAM
-  for (int i = 0; i < 32768; i++)
-  {
-    ESPMega_FRAM.write8(i, 0);
+  for(int i=0;i<32768;i++) {
+    ESPMega_FRAM.write8(i,0);
   }
   // Load Default Values
   set_ip("192.168.0.10");
   set_gw("192.168.0.1");
-  set_netmask("255.255.255.0");
   // Reboot
-#ifdef ENABLE_INTERNAL_LCD
   lcd_send_stop_bit();
   lcd_send_command("boot_state.txt=\"Factory Reset OK. Release Button.\"");
   delay(3000);
-#endif
   ESP.restart();
 }
-void check_boot_reset()
-{
+void check_boot_reset() {
   pinMode(2, INPUT_PULLUP);
-  if (digitalRead(2) == LOW)
-  {
+  if(digitalRead(2)==LOW) {
     factory_reset();
   }
 }

src/espmega_iot_core.hpp

@@ -1,38 +1,23 @@
 #pragma once
 
 #include <ESPMegaPRO.h>
-#include "user_code.hpp"
-#ifdef ENABLE_CLIMATE_MODULE
-#ifndef ENABLE_IR_MODULE
-#error "The Climate Module Requires the IR Module to be enabled with #define ENABLE_IR_MODULE"
-#endif
-#endif
 #include <ETH.h>
 #include <PubSubClient.h>
 #include <PubSubClientTools.h>
 #include <Thread.h>
 #include <StaticThreadController.h>
-#ifdef ENABLE_IR_MODULE
 #include <IRremote.hpp>
-#endif
 #include <dhtnew.h>
 #include <time.h>
-#ifdef ENABLE_INTERNAL_LCD
 #include <EasyNextionLibrary.h>
-#endif
 #include <WiFiClient.h>
-#ifdef ENABLE_WEBUI
 #include <WebServer.h>
 #include <Update.h>
-#endif
-#include "lcd.hpp"
 
-#ifdef ENABLE_CLIMATE_MODULE
+#include "lcd.hpp"
+#include "user_code.hpp"
 #include "ir_codes.hpp"
-#endif
-#ifdef ENABLE_WEBUI
 #include "espmega_iot_ota.hpp"
-#endif
 #include "espmega_iot_timer.hpp"
 
 void virtual_interrupt_loop();

src/ir_codes.hpp

@@ -1,5 +1,12 @@
 #pragma once
 #include <ESPMegaPRO.h>
+// Infrared Transciever
+#define IR_RECIEVE_PIN 35
+#define IR_SEND_PIN 17
+#define MARK_EXCESS_MICROS 20
+#define RAW_BUFFER_LENGTH 750
+#define AC_MAX_TEMPERATURE 30
+#define AC_MIN_TEMPERATURE 15
 extern const uint8_t ir_code_cool[3][16][750] = {
     // Fan Speed High
     {

src/lcd.cpp

@@ -1,37 +1,24 @@
-#include <user_code.hpp>
 #include <lcd.hpp>
 
-void lcd_send_stop_bit()
-{
-#ifdef ENABLE_INTERNAL_LCD
+void lcd_send_stop_bit() {
     Serial.write(0xFF);
     Serial.write(0xFF);
     Serial.write(0xFF);
-#endif
 }
 
-void lcd_send_command(String command)
-{
-#ifdef ENABLE_INTERNAL_LCD
+void lcd_send_command(String command) {
     lcd_send_stop_bit();
     Serial.print(command);
     lcd_send_stop_bit();
-#endif
 }
 
-void lcd_reset()
-{
-#ifdef ENABLE_INTERNAL_LCD
+void lcd_reset() {
     lcd_send_stop_bit();
     lcd_send_command("rest");
     lcd_send_stop_bit();
-#endif
 }
 
-void lcd_init()
-{
-#ifdef ENABLE_INTERNAL_LCD
+void lcd_init() {
     lcd_reset();
     delay(750);
-#endif
 }

src/user_code.hpp

@@ -5,20 +5,6 @@
 #include "espmega_iot_timer.hpp"
 #include "espmega_iot_external_lcd.hpp"
 
-// Enable Software Module(s)
-#define ENABLE_INTERNAL_LCD
-#define ENABLE_IR_MODULE
-#define ENABLE_CLIMATE_MODULE // Require IR Module
-#define ENABLE_WEBUI
-
-// Infrared Transciever
-#define IR_RECIEVE_PIN 35
-#define IR_SEND_PIN 17
-#define MARK_EXCESS_MICROS 20
-#define RAW_BUFFER_LENGTH 750
-#define AC_MAX_TEMPERATURE 30
-#define AC_MIN_TEMPERATURE 15
-
 // External LCD Configuration
 //#define ENABLE_EXTERNAL_LCD
 //#define TXD2 4