Merge branch 'main' into ise

src/espmega_iot_core.cpp

@@ -47,6 +47,7 @@ uint8_t utc_offset = 7;
 float current_room_temp = 0;
 float current_room_humid = 0;
 #endif
+bool pwm_report_enable = true;
 
 // Inputs
 #define VINT_COUNT 16
@@ -69,6 +70,7 @@ const float pwm_linear_scaling_c[PWM_COUNT] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 const int PWM_CYCLE_VALUES[PWM_CYCLE_VALUES_COUNT] = {50, 125, 255};
 char PWM_SET_STATE_TOPIC[70];
 char PWM_SET_VALUE_TOPIC[70];
+char PWM_REPORT_ENABLE_TOPIC[70];
 
 #ifdef ENABLE_INTERNAL_LCD
 // LCD
@@ -249,18 +251,20 @@ void loop()
  */
 void fram_retrieve_init()
 {
-  #ifdef ENABLE_WEBUI
+#ifdef ENABLE_WEBUI
   ESPMega_FRAM.read(FRAM_ADDRESS_WEBUI_USERNAME, (uint8_t *)WEBUI_USERNAME, 32);
   ESPMega_FRAM.read(FRAM_ADDRESS_WEBUI_PASSWORD, (uint8_t *)WEBUI_PASSWORD, 32);
-  if(strlen(WEBUI_USERNAME)==0) {
-    strcpy(WEBUI_USERNAME,"admin");
+  if (strlen(WEBUI_USERNAME) == 0)
+  {
+    strcpy(WEBUI_USERNAME, "admin");
     ESPMega_FRAM.write(FRAM_ADDRESS_WEBUI_USERNAME, (uint8_t *)WEBUI_USERNAME, 32);
   }
-  if(strlen(WEBUI_PASSWORD)==0) {
-    strcpy(WEBUI_PASSWORD,"admin");
+  if (strlen(WEBUI_PASSWORD) == 0)
+  {
+    strcpy(WEBUI_PASSWORD, "admin");
     ESPMega_FRAM.write(FRAM_ADDRESS_WEBUI_PASSWORD, (uint8_t *)WEBUI_PASSWORD, 32);
   }
-  #endif
+#endif
 // FRAM Data Retrival
 #ifdef ENABLE_CLIMATE_MODULE
   ac_mode = ESPMega_FRAM.read8(FRAM_ADDRESS_AC_MODE);
@@ -320,6 +324,8 @@ void fram_retrieve_init()
   strcat(PWM_SET_STATE_TOPIC, "/pwm/00/set/state");
   memcpy(PWM_SET_VALUE_TOPIC, MQTT_BASE_TOPIC, 20);
   strcat(PWM_SET_VALUE_TOPIC, "/pwm/00/set/value");
+  memcpy(PWM_REPORT_ENABLE_TOPIC, MQTT_BASE_TOPIC, 20);
+  strcat(PWM_REPORT_ENABLE_TOPIC, "/pwm/report_enable");
 #ifdef ENABLE_CLIMATE_MODULE
   memcpy(AC_SET_MODE_TOPIC, MQTT_BASE_TOPIC, 20);
   strcat(AC_SET_MODE_TOPIC, "/ac/set/mode");
@@ -395,11 +401,11 @@ void ota_begin()
     otabuffer+=ota_part2_1+"IP Address"+ota_part2_2+IP.toString()+ota_part2_3;
     otabuffer+=ota_part2_1+"MAC Address"+ota_part2_2+ETH.macAddress()+ota_part2_3;
     otabuffer+=ota_part2_1+"Device"+ota_part2_2+ESPMEGA_REV+ota_part2_3;
-    #ifdef FW_VERSION
+#ifdef FW_VERSION
     otabuffer+=ota_part2_1+"Firmware"+ota_part2_2+FW_VERSION+ota_part2_3;
-    #else
+#else
     otabuffer+=ota_part2_1+"Firmware"+ota_part2_2+"Out of Tree"+ota_part2_3;
-    #endif
+#endif
     otabuffer+=ota_part2_1+"BMS Server"+ota_part2_2+MQTT_SERVER.toString()+ota_part2_3;
     otabuffer+=ota_part2_1+"BMS Endpoint"+ota_part2_2+String(MQTT_BASE_TOPIC)+ota_part2_3;
     otabuffer+=ota_part2_1+"Centrally Managed"+ota_part2_2;
@@ -665,6 +671,7 @@ void mqtt_subscribe()
     mqtt.subscribe(PWM_SET_STATE_TOPIC);
     mqtt.subscribe(PWM_SET_VALUE_TOPIC);
   }
+  mqtt.subscribe(PWM_REPORT_ENABLE_TOPIC);
 #ifdef ENABLE_CLIMATE_MODULE
   mqtt.subscribe(AC_SET_FAN_TOPIC);
   mqtt.subscribe(AC_SET_TEMPERATURE_TOPIC);
@@ -713,6 +720,10 @@ void mqtt_callback(char *topic, byte *payload, unsigned int length)
   {
     pwm_value_callback(topic_trim, topic_length, payload_nt, length);
   }
+  else if (!strcmp(topic_trim, "/pwm/report_enable"))
+  {
+    pwm_set_publish_callback(topic_trim, topic_length, payload_nt, length);
+  }
 #ifdef ENABLE_ANALOG_MODULE
   else if ((!strncmp(topic_trim, "/adc/", 5)) && !strncmp(topic_trim + 7, "/set/state", 10))
   {
@@ -730,13 +741,14 @@ void mqtt_callback(char *topic, byte *payload, unsigned int length)
 #ifdef ENABLE_IR_MODULE
   else if (!strcmp(topic_trim, "/ir/send"))
   {
-    const char* delimiter = ",";
-    char* token = strtok(const_cast<char*>(payload_nt), delimiter);
-    while (token != nullptr && ir_buffer_length < IR_RAW_BUFFER_LENGTH) {
-        ir_buffer[ir_buffer_length++] = atoi(token);
-        token = strtok(nullptr, delimiter);
+    const char *delimiter = ",";
+    char *token = strtok(const_cast<char *>(payload_nt), delimiter);
+    while (token != nullptr && ir_buffer_length < IR_RAW_BUFFER_LENGTH)
+    {
+      ir_buffer[ir_buffer_length++] = atoi(token);
+      token = strtok(nullptr, delimiter);
     }
-    IrSender.sendRaw(ir_buffer,ir_buffer_length ,NEC_KHZ);
+    IrSender.sendRaw(ir_buffer, ir_buffer_length, NEC_KHZ);
   }
 #endif
   else if (!strcmp(topic, STATE_REQUEST_TOPIC))
@@ -869,6 +881,7 @@ void publish_pwm_states()
   for (int i = 0; i < PWM_COUNT; i++)
   {
     publish_pwm_state(i);
+    publish_pwm_value(i);
   }
 }
 
@@ -879,12 +892,11 @@ void publish_pwm_states()
  */
 void publish_pwm_state(int id)
 {
+  if (!pwm_report_enable)
+    return;
   int state = pwm_states[id];
-  int value = pwm_values[id];
   PWM_STATE_TOPIC[base_topic_length + 4] = ((id - id % 10) / 10) + '0';
   PWM_STATE_TOPIC[base_topic_length + 5] = (id % 10) + '0';
-  PWM_VALUE_TOPIC[base_topic_length + 4] = ((id - id % 10) / 10) + '0';
-  PWM_VALUE_TOPIC[base_topic_length + 5] = (id % 10) + '0';
   if (state == 1)
   {
     mqtt.publish(PWM_STATE_TOPIC, "on");
@@ -893,6 +905,15 @@ void publish_pwm_state(int id)
   {
     mqtt.publish(PWM_STATE_TOPIC, "off");
   }
+}
+
+void publish_pwm_value(int id)
+{
+  if (!pwm_report_enable)
+    return;
+  int value = pwm_values[id];
+  PWM_VALUE_TOPIC[base_topic_length + 4] = ((id - id % 10) / 10) + '0';
+  PWM_VALUE_TOPIC[base_topic_length + 5] = (id % 10) + '0';
   char temp[6];
   itoa(value, temp, DEC);
   mqtt.publish(PWM_VALUE_TOPIC, temp);
@@ -939,7 +960,7 @@ void pwm_set_value(int id, int value)
   else if (lcd_current_page == 5 && id == lcd_pwmAdj_id)
     panel.writeNum("pwm_value.val", pwm_values[lcd_pwmAdj_id]);
 #endif
-  publish_pwm_state(id);
+  publish_pwm_value(id);
   pwm_changed_user_callback(id);
 }
 
@@ -1055,6 +1076,11 @@ void publish_input_state(int id, int state)
   mqtt.publish(INPUTS_TOPIC, state ? "1" : "0");
 }
 
+void pwm_set_publish_callback(char *topic, uint8_t topic_length, char *payload, unsigned int payload_length)
+{
+  pwm_report_enable = !strcmp(payload, "on");
+}
+
 /**
  * @brief Callback function to request the current state of the device.
  *
@@ -1065,6 +1091,7 @@ void state_request_callback()
 {
   publish_input_states();
   publish_pwm_states();
+  pwm_report_enable = true;
 #ifdef ENABLE_CLIMATE_MODULE
   publish_ac_state();
   publish_env_state();
@@ -1891,10 +1918,10 @@ void factory_reset()
   set_ip("192.168.0.10");
   set_gw("192.168.0.1");
   set_netmask("255.255.255.0");
-  #ifdef ENABLE_WEBUI
+#ifdef ENABLE_WEBUI
   set_webui_username("admin");
   set_webui_password("admin");
-  #endif
+#endif
 
   // Reboot
 #ifdef ENABLE_INTERNAL_LCD
@@ -1948,7 +1975,7 @@ void disable_adc(int id)
 
 /**
  * Publishes the state of an ADC (Analog-to-Digital Converter) to the MQTT broker.
- * 
+ *
  * @param id The ID of the ADC.
  */
 void publish_adc_state(int id)
@@ -1960,7 +1987,7 @@ void publish_adc_state(int id)
 
 /**
  * @brief Publishes the ADC states.
- * 
+ *
  * This function iterates over the ADC channels and publishes the state of each channel.
  */
 void publish_adc_states()
@@ -2050,7 +2077,7 @@ void publish_adc_values()
 
 /**
  * Publishes the state of a DAC (Digital-to-Analog Converter) to the MQTT broker.
- * 
+ *
  * @param id The ID of the DAC.
  */
 void publish_dac_state(int id)
@@ -2062,7 +2089,7 @@ void publish_dac_state(int id)
 
 /**
  * Publishes the DAC value for a given ID.
- * 
+ *
  * @param id The ID of the DAC value to publish.
  */
 void publish_dac_value(int id)
@@ -2154,9 +2181,9 @@ void dac_set_state(int id, bool state)
 
 /**
  * @brief Publishes the states of all DACs.
- * 
+ *
  * This function iterates through all DACs and publishes their states.
- * 
+ *
  * @return void
  */
 void publish_dac_states()
@@ -2169,9 +2196,9 @@ void publish_dac_states()
 
 /**
  * @brief Publishes the DAC values.
- * 
+ *
  * This function iterates through all the DAC channels and publishes their values.
- * 
+ *
  * @return void
  */
 void publish_dac_values()
@@ -2226,7 +2253,7 @@ void dac_set_state_callback(char *topic, uint8_t topic_length, char *payload, un
 
 /**
  * @brief Get the ADC value for the specified ID.
- * 
+ *
  * @param id The ID of the ADC channel.
  * @return The ADC value.
  */
@@ -2236,7 +2263,7 @@ uint16_t adc_get_value(int id)
 }
 /**
  * @brief Get the state of the ADC with the specified ID.
- * 
+ *
  * @param id The ID of the ADC.
  * @return true if the ADC is enabled, false otherwise.
  */
@@ -2246,7 +2273,7 @@ bool adc_get_state(int id)
 }
 /**
  * @brief Get the value of a DAC channel.
- * 
+ *
  * @param id The ID of the DAC channel.
  * @return The value of the DAC channel.
  */
@@ -2256,7 +2283,7 @@ uint16_t dac_get_value(int id)
 }
 /**
  * @brief Get the state of the DAC with the specified ID.
- * 
+ *
  * @param id The ID of the DAC.
  * @return The state of the DAC.
  */
@@ -2267,8 +2294,10 @@ bool dac_get_state(int id)
 
 #endif
 
-void virtual_interrupt_preload() {
-  for (int i = 0; i < 16; i++) {
+void virtual_interrupt_preload()
+{
+  for (int i = 0; i < 16; i++)
+  {
     virtual_interupt_state[i] = ESPMega_digitalRead(virtual_interrupt_pins[i]);
   }
 }

src/espmega_iot_core.hpp

@@ -61,6 +61,7 @@ void ota_begin();
 
 void publish_pwm_states();
 void publish_pwm_state(int id);
+void publish_pwm_value(int id);
 void pwm_set_state(int id, int state);
 void pwm_set_value(int id, int value);
 void pwm_toggle(int id);
@@ -157,4 +158,6 @@ void publish_adc_states();
 uint16_t adc_get_value(int id);
 bool adc_get_state(int id);
 uint16_t dac_get_value(int id);
-bool dac_get_state(int id);
+bool dac_get_state(int id);
+
+void pwm_set_publish_callback(char *topic, uint8_t topic_length, char *payload, unsigned int payload_length);